Cutting Power
Mostrando 1-12 de 44 artigos, teses e dissertações.
-
1. Single-Layered Paper-Based Microfluidic Devices Made by Paint-Spraying Technique with Great Barrier Resistance for Colorimetric Assays
The single-layered paint-spraying paper based microfluidic devices (sp-μPADs) have been for the first time integrated with the colorimetric assay. The polymethyl methacrylate (PMMA) board was applied as the mask instead of the iron mask, reducing the power requirement of the cutting machine. The paint was sprayed into the paper, which blocked the pores of t
J. Braz. Chem. Soc.. Publicado em: 2021-03
-
2. Aplicação da técnica de CAMQL na retificação cilíndrica externa do aço AISI 4340 utilizando rebolo de CBN
RESUMO O processo de retificação possui como características o bom acabamento superficial e alta precisão dimensional e geométrica. Assim, peças usinadas por este processo possuem um alto valor agregado por se tratar de um processo de acabamento que é comumente realizado nas últimas etapas da fabricação. Um fator limitador do processo de retificaç
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Circular saw misuse is related to upper limb injuries: a cross-sectional study
OBJECTIVES: Machinery injuries account for a substantial share of traumatic upper limb injuries (TULIs) affecting young active individuals. This study is based on the hypothesis that there is an important relationship between the improper use of power saws and TULIs. The aim of the study is to assess the prevalence and epidemiology of TULIs caused by power
Clinics. Publicado em: 09/09/2019
-
4. A Comparative Study of the Heat Input During Laser Welding of Aeronautical Aluminum Alloy AA6013-T4
ABSTRACT The heat input is the amount of energy supplied per unit length of the welded workpiece. In this study, the effect of two different heat inputs in laser beam welding of a high strength aluminum alloy AA6013-T4 was evaluated from macrostructural and microstructural points of view. The experiments were performed using a continuous wave 2 kW Yb-fiber l
J. Aerosp. Technol. Manag.. Publicado em: 14/06/2018
-
5. New concept of tunnel boring machine: high performance using water jet and diamond wire as rock cutting technology
Abstract Tunnel boring machines are important tools in underground infrastructure projects. Although being well established equipment, these machinesare based on designsof more than 60 years ago and are characterized by big dimensions, enormous weight and high power consumption. Commercial aspects should be noted too. The model adopted by the TBM industry re
REM, Int. Eng. J.. Publicado em: 2018-03
-
6. Application viability evaluation of the Minimum Quantity Lubrication coolant technique under different flow rates in Plunge Cylindrical Grinding of the ABNT 4340 steel with aluminum oxide wheel
Abstract The coolant delivery technique known as Minimal Quantity Lubrication (MQL) has been employed in machining since the end of the 20th Century and has gained considerable evidence in the last years as a viable alternative to the use of the conventional coolant technique (flood). Due to the low oil flow rate delivered by the MQL technique in grinding op
REM, Int. Eng. J.. Publicado em: 2017-12
-
7. Effect of Solid-State Laser Parameters on the Surface's Topography Formation During Texturization of Hard Metal Cutting Tools
ABSTRACT: The objective of this paper is to analyze the influence of specific laser system parameters on the microstructure of the ring formation process on the hard metal tool's surface. The parameters analyzed were: working distance, incident beam power and tool surface treatment, flank and rake. The microstructures were analyzed with regard to its diamete
J. Aerosp. Technol. Manag.. Publicado em: 2015-03
-
8. Utilization of minimum quantity lubrication (MQL) with water in CBN grinding of steel
The use of cutting fluids is fundamental to machining processes, mainly when it comes to high heat generation, which is the case of grinding. Thus, lubrication and cooling provided by cutting fluids improve the final quality of the workpiece. However, cutting fluid usage provide some drawbacks concerning environmental, costs and health issues. Therefore, new
Mat. Res.. Publicado em: 08/10/2013
-
9. Emprego de ferramentas estatísticas para avaliação da usinabilidade de ligas de alumínio
The main objective of the present work is to study the effect of the input variables: mechanical properties of the workpiece (tensile strength, hardness and elongation) and cutting conditions (cutting speed, feed rate, depth of cut and lubri-cooling system) over the output variables: cutting forces, power consumption, cutting temperature, surface roughness (
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/05/2012
-
10. Estudo da influência da força de corte em usinagem a verde nas propriedades mecânicas de cerâmicas sinterizadas / Influence of the cutting force of green machining on the mechanical properties of sintered ceramics
The present study deals with the measurement forces of green machining ceramics and their correlation with the mechanical properties after sintering. The green machining is employed in crude compacts either to check raw formats without compromising the extreme dimensional accuracy or to obtain a preform prior to finish machining after sintering, extensively
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/01/2012
-
11. Modelling and optimization of the surface roughness in the dry turning of the cold rolled alloyed steel using regression analysis
Surface quality of the machined parts is one of the most important product quality indicators and one of the most frequent customer requirements. The average surface roughness (Ra) represents a measure of the surface quality, and it is mostly influenced by the following cutting parameters: the cutting speed, the feed rate, and the depth of cut. Quantifying t
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03
-
12. SISTEMATIZAÇÃO DE CONHECIMENTO PARA O PROJETO DE PLATAFORMAS DE COLHEITA DE FEIJÃO / KNOWLEDGE SYSTEMATIZATION FOR THE DESIGN OF HARVEST HEADERS OF BEANS
Due to the need to increase in production and to the high rates of losses in the header because of machines with low efficiency in harvesting, it is presented, in this thesis the knowledge systematization needed to develop new header designs to harvest beans. This work presents the machines used for the harvest of beans, the harvesting systems, and a list of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2011