Deformation Energy
Mostrando 1-12 de 128 artigos, teses e dissertações.
-
1. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
2. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
3. Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk
The microstructure and texture distribution of a Ti-1023 forged disk were investigated by scanning electron microscopy and synchrotron-based high-energy X-ray diffraction. The finite element method was used to simulate temperature and strain distribution in order to investigate the relationship of the α/β forging process with microstructure and texture dis
Mat. Res.. Publicado em: 30/09/2019
-
4. Analysis of a car door subjected to side pole impact
Abstract The results of a study on the response of a side impact beam located in a car door to impact loading is presented. The side impact beam is situated in both the front and rear side doors of a vehicle between the inner and outer shells to minimise intrusion into the passenger compartment during a collision whilst absorbing as much impact energy as pos
Lat. Am. j. solids struct.. Publicado em: 30/09/2019
-
5. Review: deformation and optimisation crashworthiness method for foam filled structures
Abstract In this paper, we give overview of deformation modes for the uniform foam filled thin-walled structure such as circular tubes, square tubes, rectangular tubes, tapered tubes, hat tubes and cone tubes. Foam material is used as a reinforcing material on a thin wall tube which has potential as being a good energy absorber. This is evident from many of
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
6. System to measure torsion modulus of polymers using the deformation energy method
Abstract This paper presents an alternative method to measure the torsion modulus, G, for samples of polymers. We constructed a measurement system with a force sensor (FS) and a rotational movement sensor (RMS) to obtain a relationship between force (F) and torsion angle (θ). An expression that could return the value of G was deduced using the deformation e
Polímeros. Publicado em: 01/08/2019
-
7. An efficient general curvilinear coordinates finite element method for the linear dynamic study of thickness-independent shells
Abstract yyTo date, a large number of finite element methods have been developed to study the dynamics of shell structures. Most of them are generally based on the degenerated solid approach and other less in shell theories, but introducing, in this last case, some assumptions to analyze this problem: some of them refer to shallow shells (slightly curved she
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
8. Thermal radical polymerization of Bis(methacrylamide)s
Abstract Methacrylamides monomers for dental applications were synthesized using a one-step procedure starting from methacrylic anhydride and the respective diamine: N,N’-(propane-1,3-diyl)-bis(N-ethyl-2-methylacrylamide) (1), N,N’-(butane-1,4-diyl)-bis(2-methacrylamide) (2), N,N’-(octane-1,8-diyl-)bis(2-methylacrylamide) (3) and N,N’-(1,4-phenylene)
Polímeros. Publicado em: 27/06/2019
-
9. Effect of Semi-Apical Angle on the Crush Mechanics of Metallic Bi-Tubular Tubes under Dynamic Axial Loading
ABSTRACT Aerospace and automotive industrial advancement demands high energy absorbing structures for the human and equipement safety during transportaion and accidental emergencies. Thin-walled metallic tubes applications in the structures serve the purpose by absorbing energy during such dynamic scenarios. A new concept is presented in this study, involvin
Matéria (Rio J.). Publicado em: 20/05/2019
-
10. Mechanical Properties and Microstructural Evolution of CuZn Alloys via Pre-Torsional Deformation
Mechanical properties and microstructural evolution of Cu-10wt.%Zn and Cu-30wt.%Zn alloys after pre-torsional deformation have been investigated in this study. The results indicated that pre-torsional deformation can significantly enhance the strength of both Cu-10wt.%Zn and Cu-30wt.%Zn alloys without changing their shape and size, but with the sacrifice of
Mat. Res.. Publicado em: 18/04/2019
-
11. The effect of the austenite grain refinement on the tensile and impact properties of cast Hadfield steel
This paper studied the effect of the austenite grain refinement on the tensile and impact properties of a cast Hadfield steel (12 % Mn, 1.2 %C and 0.65 % Si). The austenite grain refinement was obtained by hafnium inoculation. Microstructural characterization showed that the Hf-refined cast Hadfield steel featured a grain size of 600 µm, while the non-refin
Mat. Res.. Publicado em: 02/08/2018
-
12. Amorphization of Graphite Flakes in Gray Cast Iron Under Tribological Load
A gray cast iron disc, which had been submitted to a heavy duty automotive brake test, was examined with energy filtered transmission electron microscopy. A graphite flake in a convenient angular position showed the shear interaction of graphite layers with the iron matrix in nano-scale resolution. Atomic layers of graphite were wedged into the ferritic bulk
Mat. Res.. Publicado em: 28/05/2018