Density Of Defects
Mostrando 1-12 de 165 artigos, teses e dissertações.
-
1. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
2. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019
-
3. ACETABULAR RECONSTRUCTION IN PAPROSKY TYPE III DEFECTS
RESUMO Objetivos: A deficiência pélvica severa apresenta um problema difícil na artroplastia do quadril. Especificamente, os objetivos são restaurar o estoque ósseo pélvico, colocar o componente acetabular na posição anatômica correta e otimizar a estabilidade da articulação. Atualmente, existem muitas técnicas cirúrgicas para a cirurgia de rev
Acta ortop. bras.. Publicado em: 2019-02
-
4. Influence of defects on the irreversible phase transition in the Fe-Pd doped with Co and Mn
ABSTRACT The appearance of BCT martensite in Fe-Pd-based ferromagnetic shape memory alloys, which develops at lower temperatures than the thermoelastic martensitic transition, deteriorates the shape memory properties. In a previous work performed in Fe70Pd30, it was shown that a reduction in defects density reduces the non thermoelastic FCT-BCT transformatio
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Effect of thermal treatment on points defects of Al-N codoped ZnO films
ABSTRACT The effect of annealing temperature on the structural properties of Al-N codoped ZnO films were studied by X-ray diffraction, photoluminescence and Raman spectroscopy. ZnO films were deposited by sputtering technique on silicon substrates at 20 ºC, Al-concentration was kept constant and N-flow was changed to 6, 12 and 15 sccm. A thermal treatment w
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Propiedades físicas y cristalinas del Cd1-xZnxTe (0 ≤ x ≤ 1)
ABSTRACT Cd1-xZnxTe (0 ≤ x ≤ 1) and ZnTe are II-VI semiconductors, which are used in single crystalline structure to improve their crystalline and electrical properties. The CZT and ZnTe must possess high crystalline and electrical quality to be used, the first in x or γ-ray detectors, and as substrates for suitable epitaxial films for detecting IR radi
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Comparing osteogenic effects between concentrated growth factors and the acellular dermal matrix
Abstract Concentrated growth factor (CGF) is an autogenuous product that contains highly concentrated number of platelets and can be derived from venous blood by selective centrifugation. It has been speculated that local growth factors in human platelets (insulinlike growth factor, IGF; transforming growth factor, TGF-b; platelet derived growth factor, PDGF
Braz. oral res.. Publicado em: 03/05/2018
-
8. Bone repair access of BoneCeramic™ in 5-mm defects: study on rat calvaria
Abstract Objective: The aim of this study was to evaluate the osteoconductive potential of BoneCeramic™ on bone healing in rat calvaria 5-mm defects. Material and Methods: A 5-mm calvaria bone defect was induced in three groups and the defect was not filled with biomaterial [Clot Group (CG)], autogenous bone (AG), or Bone Ceramic Group (BCG). Animals wer
J. Appl. Oral Sci.. Publicado em: 15/01/2018
-
9. Biochemical and seminal parameters of lambs fed palm kernel cake under grazing system
ABSTRACT This study aimed to assess the effects of palm kernel cake on semen quality and biochemical parameters of Santa Inês lambs. A total of 40 animals with 24.10±2.72 kg body weight and five months old were assigned in a completely randomized design into four groups and 10 replicates. The animals were subjected to four levels of palm kernel cake (0, 15
R. Bras. Zootec.. Publicado em: 2017-08
-
10. TIMBER BEAM REPAIR BASED ON POLYMER-CEMENTITIOUS BLENDS
ABSTRACT This study aims to manufacture and apply polymer-cementitious blends based on a combination of epoxy polymer and Ordinary Portland Cement (OPC) for timber beam repair. The material was used to repair timber beams of “Maçaranduba” (Manilkara sp.) and “Cedro doce” (Cedrella spp) wood species. A full factorial design was conducted to investiga
Eng. Agríc.. Publicado em: 2017-04
-
11. The efficacy of low-level 940 nm laser therapy with different energy intensities on bone healing
Abstract The aim of this study was to evaluate the efficacy of low-level 940 nm laser therapy with energy intensities of 5, 10 and 20 J/cm2 on bone healing in an animal model. A total of 48 female adult Wistar rats underwent surgery to create bone defects in the right tibias. Low-level laser therapy (LLLT) was applied immediately after surgery and on post-op
Braz. oral res.. Publicado em: 05/01/2017
-
12. Growth and Characterization of Graphene on Polycrystalline SiC Substrate Using Heating by CO2 Laser Beam
The thermal decomposition of silicon carbide (SiC), with the subsequent formation of graphene, can be achieved by heating treatment. Several heating processes have been applied for this purpose by using SiC, either in form of powder particles or monocrystalline substrate. In this work, instead of using an expensive commercially available SiC wafer, a polycry
Mat. Res.. Publicado em: 26/09/2016