Differential Equation
Mostrando 1-12 de 306 artigos, teses e dissertações.
-
1. Yellow Mombin (Spondias mombin L.) Seeds from Agro-Industrial Waste as a Novel Adsorbent for Removal of Hexavalent Chromium from Aqueous Solutions
The objective of this study was to develop a low-cost and eco-friendly adsorbent from agro-industrial waste for the removal of hexavalent chromium in the aqueous medium. The adsorbent (BMC) produced from yellow mombin (Spondias mombin L.) seeds was characterized by the determination of the chemical composition, thermal analysis (thermogravimetric (TG) analys
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
2. Hopfield Neural Network-Based Algorithm Applied to Differential Scanning Calorimetry Data for Kinetic Studies in Polymorphic Conversion
A general kinetic equation to simulate differential scanning calorimetry (DSC) data was employed along this work. Random noises are used to generate a thousand data, which are considered to evaluate the performance of Levenberg-Marquardt (LM) and a Hopfield neural network (HNN) based algorithm in the fitting process. The HNN-based algorithm showed better res
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
3. Imaging evaluation of hallux valgus
Abstract This work investigates an alternative numerical scheme for the solution of an exact formulation based on Geometrical Optics (GO) principles to synthesize offset dual reflector antennas. The technique is suited to solve a second-order nonlinear partial differential equation of the Monge-Ampère type as a boundary value problem. An iterative algorithm
Radiol Bras. Publicado em: 2020-06
-
4. GO Synthesis of Offset Dual Reflector Antennas Using Local Axis-Displaced Confocal Quadrics
Abstract This work investigates an alternative numerical scheme for the solution of an exact formulation based on Geometrical Optics (GO) principles to synthesize offset dual reflector antennas. The technique is suited to solve a second-order nonlinear partial differential equation of the Monge-Ampère type as a boundary value problem. An iterative algorithm
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
5. Comportamento da função renal na crioablação percutânea de massa renal
Abstract This work investigates an alternative numerical scheme for the solution of an exact formulation based on Geometrical Optics (GO) principles to synthesize offset dual reflector antennas. The technique is suited to solve a second-order nonlinear partial differential equation of the Monge-Ampère type as a boundary value problem. An iterative algorithm
Radiol Bras. Publicado em: 2020-06
-
6. Hidrodissecção modificada para biópsia guiada por tomografia computadorizada de lesões mediastinais: técnica “marshmallow”
Abstract This work investigates an alternative numerical scheme for the solution of an exact formulation based on Geometrical Optics (GO) principles to synthesize offset dual reflector antennas. The technique is suited to solve a second-order nonlinear partial differential equation of the Monge-Ampère type as a boundary value problem. An iterative algorithm
Radiol Bras. Publicado em: 2020-06
-
7. Análise de Estabilidade e de Consistência da Equação de Difusão Anômala com Fluxo Bimodal Empregando o Método de Volumes Finitos
RESUMO. A análise de consistência e as condições de estabilidade da equação de difusão com fluxo bimodal são tratadas neste trabalho. Foram, também, apresentados diversos detalhes sobre a maneira como a equação diferencial foi discretizada no âmbito do método de Volumes Finitos incluindo a forma que as condições de contorno foram definidas nas
TEMA (São Carlos). Publicado em: 20/12/2019
-
8. Comparison and Combination of Techniques for Determining the Parameters of a Magnetic Hysteresis Model
Abstract The Jiles-Atherton scalar hysteresis model presents five parameters used to represent the material tested and used to calculate the magnetic losses. This article presents a comparative analysis of the performance of two methods of identifying these parameters. In the first method, the equations of Jiles-Atherton were assembled into a single non-line
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
9. Analytical method for determining the saturation point of superplasticizers in cement pastes using the Marsh cone
Resumo A dosagem ótima dos aditivos superplastificantes (SP) é determinada pelo ponto de saturação do SP (PSP), obtido na pasta de cimento pela utilização do cone de Marsh. A obtenção do PSP é importante, pois define a quantidade de SP que deve ser utilizada em dosagens de concretos, quando são necessárias a redução da demanda de água e a melho
Cerâmica. Publicado em: 06/06/2019
-
10. A Unified Approach to the Timoshenko Geometric Stiffness Matrix Considering Higher-Order Terms in the Strain Tensor
Abstract Nonlinear analyses using an updated Lagrangian formulation considering the Euler-Bernoulli beam theory have been developed with consistency in the literature, with different geometric matrices depending on the nonlinear displacement parts considered in the strain tensor. When performing this type of analysis using the Timoshenko beam theory, in gene
Lat. Am. j. solids struct.. Publicado em: 25/04/2019
-
11. Reduced-order strategy for meshless solution of plate bending problems with the generalized finite difference method
Abstract This paper presents some recent advances on the numerical solution of the classical Germain-Lagrange equation for plate bending of thin elastic plates. A meshless strategy using the Generalized Finite Difference Method (GFDM) is proposed upon substitution of the original fourth-order differential equation by a system composed of two second-order par
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
12. Hankel transformation method for solving the Westergaard problem for point, line and distributed loads on elastic half-space
Abstract The Hankel transformation method was used in this work to determine the normal and shear stress distributions due to point, line and distributed loads applied to the surface of an elastic media. The elastic media considered in this study was assumed to be inextensible in the horizontal directions, and the only non-vanishing displacement component is
Lat. Am. j. solids struct.. Publicado em: 04/02/2019