Drilling Fluid
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Avaliação de amidos modificados empregados na mineração para aplicação em fluidos de perfuração de poços de petróleo
RESUMO Amidos e seus derivados são utilizados em praticamente todos os setores industriais. Na indústria petrolífera podem ser empregados como aditivos controladores de filtrado, os quais controlam eficazmente a perda de fluido para a formação rochosa adjacente. O presente trabalho teve como objetivo avaliar o uso de amidos, de mandioca e de milho, util
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Influence of reactivity and mineralogical composition on instability due to the disintegration of shales from Paraíba and Ceará States, Brazil
Resumo Este trabalho teve como objetivo correlacionar a reatividade e composição mineralógica de folhelhos à sua desintegração. Para tanto, foram caracterizadas cinco amostras de folhelho das Bacias do Rio do Peixe e Araripe, localizadas nos estados brasileiros da Paraíba e Ceará e, para fins de comparação, foi utilizada uma amostra de argila bento
Cerâmica. Publicado em: 15/08/2019
-
3. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Evaluación reológica de fluidos de perforación base agua con nanosílice
ABSTRACT Generally, drilling fluids may be defined as fluids with a composition that can assist the generation and removal of cuttings from the borehole to the surface. They are classified according to their base as water based mud (WBM), oil based mud (OBM) or gas. Polymers, densifiers, brines, surfactants, among others are the primary components of drillin
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Methods of Hearing Preservation during Cochlear Implantation
Abstract Introduction Recent advances in surgical techniques and electrode design have made residual hearing preservation during cochlear implantation (CI) possible, achievable, and desirable. Objectives The objective of this study was to review the literature regarding methods used for hearing preservation during CI surgery. Data Synthesis We performe
Int. Arch. Otorhinolaryngol.. Publicado em: 2017-09
-
6. Study of Continuous Rheological Measurements in Drilling Fluids
Abstract Drilling an oil well involves using drilling fluids that perform cleaning and cooling functions, but that most importantly maintain the fluids of the geological formation contained by hydraulic pressure. A fundamental role in predicting the hydraulic pressure of the well consists of monitoring the fluid’s rheological behavior. This paper summarize
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
7. AVALIAÇÃO DO POTENCIAL USO DE BIOGLICERINA COMO BASE PARA FORMULAÇÃO DE FLUIDOS DE PERFURAÇÃO AQUOSOS PARA POÇOS DE PETRÓLEO E GÁS
The growing global concern about the environment associated with academic and government efforts are enabling a number of alternatives for sustainable development. Within this perspective one can include the search for value-added products using waste from renewable energy sources, such as those from the production of biodiesel. The rapid development of biod
Quím. Nova. Publicado em: 2017-05
-
8. NUMERICAL INVESTIGATION OF NON-NEWTONIAN DRILLING FLUIDS DURING THE OCCURRENCE OF A GAS KICK IN A PETROLEUM RESERVOIR
Abstract In this work, a simplified kick simulator is developed using the ANSYS® CFX software in order to better understand the phenomena called kick. This simulator is based on the modeling of a petroleum well where a gas kick occurs. Dynamic behavior of some variables like pressure, viscosity, density and volume fraction of the fluid is analyzed in the fi
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
9. The effect of the inner cylinder rotation on the fluid dynamics of non-Newtonian fluids in concentric and eccentric annuli
Helical flow in an annular space occurs during oil drilling operations. The correct prediction of flow of drilling fluid in an annular space between the wellbore wall and the drill pipe is essential to determine the variation in fluid pressure within the wellbore. This paper presents experimental and CFD simulation results of the pressure drop in the flow of
Braz. J. Chem. Eng.. Publicado em: 2014-12
-
10. Bioconversion from crude glycerin by Xanthomonas campestris 2103: xanthan production and characterization
The production and rheological properties of xanthan gum from crude glycerin fermentation, a primary by-product of the biodiesel industry with environmental and health risks, were evaluated. Batch fermentations (28 °C/250 rpm /120 h) were carried out using crude glycerin, 0.01% urea and 0.1% KH2PO4, (% w/v), and compared to a sucrose control under the same
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
11. Invasão de fluidos de perfuração e fluxo reverso de óleo em reservatórios de arenito e de carbonato / Invasion of drilling fluids and oil backflow in sandstone and carbonate reservoirs
As recentes descobertas do pré-sal no Brasil trouxeram novos desafios para as atividades de explotação de petróleo. Perfuração em formações carbonáticas apresentam grandes diferenças em relação a perfurações em rochas areníticas. Enquanto arenitos são mais homogeneos, rochas carbonáticas podem apresentar significativas variações em relaç�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012
-
12. Influência da argila na invasão de fluidos de perfuração em reservatórios de petróleo / Clay influence on drilling fluids invasion in petroleum reservoir
A perfuração de poços de petróleo pode danificar fortemente a formação, incluindo a região de interesse: o reservatório. Perfurar sem que se danifique o reservatório caracteriza-se como um grande desafio, e por isso, tem sido estimulado o desenvolvimento de tecnologias de fluidos e otimização de processos de perfuração, incluindo, por exemplo, o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012