Electric Characterization
Mostrando 1-12 de 147 artigos, teses e dissertações.
-
1. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
2. Evaluation of the Influence of the Substituting Cation on the Structural and Morphological Properties of the New Garnet Sm3−xREExFe5O12 (REE = Dy, Gd and Lu)
Rare earth garnets (REE3Fe5O12) have magnetic-electric and optical properties that can be used in transmitters, microwave and data storage devices. These properties depend mainly on partial or total substitution of the cationic sites, as well as by the synthesis method used. Therefore, in this work was studied the influence of the substituting cation on the
Mat. Res.. Publicado em: 20/01/2020
-
3. Microwave Assisted Ultra-Fast Method to Synthesize Carbonate-Phosphates, Na3MCO3PO4 (M = Mn, Fe, Co, Ni) - Relevant Materials Applied in Sodium-Ion Batteries
Although largely used in mobiles and electric vehicles applications, insertion batteries based on Li-ion technology are high-cost devices. These applications require high-performance energy storage systems with high-energy and high-power densities, which are better attained by Li-ion technology. However, stationary applications such as power plants and unint
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
4. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
5. Reduction of electric arc furnace dust pellets by mixture containing hydrogen
Abstract The large amount of dust generated in electric arc furnace aligned with its chemical composition makes this dust a potential source of iron in the direct reduction iron process. Thus, the aim of this research is to investigate the reduction of pellets produced with electric arc furnace dust using hydrogen as the reducing agent. The kinetic investiga
REM, Int. Eng. J.. Publicado em: 2019-03
-
6. Mapping and Characterization of the Grid-connected Photovoltaic Systems in the City of Curitiba: Preliminary Results
ABSTRACT This work presents the mapping of grid-connected photovoltaic systems supported by the Normative Resolution (NR) of the National Agency of Electric Energy (ANEEL) Nº 482/2012 in the city of Curitiba. Firstly, a brief introduction was made justifying the reasons that led to the development of this study, followed by the explanation about the methodo
Braz. arch. biol. technol.. Publicado em: 29/11/2018
-
7. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
ABSTRACT In this work two kinds of "soft coatings" were obtained by co-electrophoretic deposition technique (co-EPD). In all cases a bioglass was used as inorganic phase, and a commercial poly(ɛ-caprolactone), (PCLC), and an anionic synthesized PCL modified with maleic anhydride (PCLS) were used as organic phase. To ensure an adequate coating over the metal
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Characterization of mineral wools obtained from ornamental rock wastes
Abstract The study aimed to characterize the mineral wools obtained from wastes of the cutting step of marble and granite, in order to evaluate the possibility of their use on an industrial scale. Mixtures of marble and/or granite wastes were prepared in order to reach the chemical composition of rock and glass wools. The batches were melted in an electric a
REM, Int. Eng. J.. Publicado em: 2018-07
-
10. Characterization and selection method of Venturi injectors for pressurized irrigation
ABSTRACT Venturi-type chemigation injectors are widely used due to their advantages: they do not require electric power and are cheap to operate. However, they also generate considerable energy losses which affect the pressure in the system. The correct characterization of these systems requires pressures to be correctly set at the inlet, injector and outlet
Rev. Ciênc. Agron.. Publicado em: 2018-06
-
11. Martensitic Transformation Under Compression of a Plasma Processed Polycrystalline Shape Memory CuAlNi Alloy
Shape memory alloys (SMA) are attracting considerable attention owing to possible applications from biomedical to aerospace. In particular, CuAlNi alloys present significant advantages associated with low cost, easy processing and superior thermo-electric conductivity over other SMAs such as the NiTi alloys. Characterization of some properties and structural
Mat. Res.. Publicado em: 31/08/2017
-
12. Structural, Atomic and Electrostatic Force Microscopy Analyses on YBCO/PBCO/LCMO Superlattices
In order to study the influence of the insulator layer thickness in heterojunctions, (YBa2Cu3O7-δ[20nm]/ PrBa2Cu3Oy/La1/3Ca2/3MnO3[20nm])x20 superlattices were prepared by pulsed laser deposition using three PrBa2Cu3Oy layer thicknesses and two different sequences of deposition. Sample characterization showed primitive orthorhombic crystalline arrangement f
Mat. Res.. Publicado em: 03/04/2017