Electrolytic Oxidation
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. ELECTROCHEMICAL INCINERATION OF SHORT-CHAIN CARBOXYLIC ACIDS WITH NB‑SUPPORTED BORON DOPED DIAMOND ANODE: SUPPORTING ELECTROLYTE EFFECT INTO THE ELECTROGENERATED OXIDANT SPECIES (HYDROXYL RADICALS, HYDROGEN PEROXIDE AND PERSULFATE)
This work describes the electrochemical oxidation study of three short chain carboxylic acids (acetic, oxalic and formic 0.18 mol L-1) using different electrolysis conditions (electrolyte composition and current density) in an electrochemical reactor fitted with niobiumsupported/BDD electrode (Nb/BBD) as anode and titanium plate as cathode. The experiments w
Quím. Nova. Publicado em: 2020-03
-
2. Estudo de recobrimentos de silicato e aluminato obtidos por oxidação por plasma eletrolítico em liga de alumínio
RESUMO As ligas de Alumínio são utilizadas para diversas finalidades e para a maioria dos casos a superfície desses materiais precisa ser modificada a fim de se melhorar propriedades como resistência ao desgaste e corrosão. Neste cenário, o processo de oxidação por plasma eletrolítico (PEO) surge como uma alternativa viável para produção de recob
Matéria (Rio J.). Publicado em: 20/05/2019
-
3. Recubrimientos porosos de dióxido de titanio sintetizados por oxidación anódica
ABSTRACT Titanium dioxide is one of the most used materials in heterogeneous photocatalysis due to its commercial availability, low cost, chemical stability, low toxicity and high photocatalytic activity. One of the most efficient and economical methods to obtain TiO2 coatings is the plasma electrolytic oxidation. In this anodization process, a direct curren
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Obtaining an Optical Trap Type Surface by Plasma Electrolytic Oxidation
High performance solar collectors are those with high selectivity surfaces, high solar radiation absorption and that do not thermally reemit to the external environment. Strategies to enhance this performance might involve surface porosity modification. In this work, a plasma treatment technique called plasma electrolytic oxidation (PEO) has been tested to p
Mat. Res.. Publicado em: 01/03/2018
-
5. Selective Surfaces of Black Chromium for Use in Solar Absorbers
One of the applications of selective surfaces is to improve performance of solar absorbers. The purpose of this work is to produces selective coatings with high absorption of solar radiation in the range of UV/Vis/NIR. It was prepared a selective surface composed of black chromium (Cr/Cr2O3) deposited on substrates of AISI 304 stainless steel using the techn
Mat. Res.. Publicado em: 09/11/2017
-
6. Mg-Containing Hydroxyapatite Coatings Produced by Plasma Electrolytic Oxidation of Titanium
Plasma Electrolytic Oxidation (PEO) is promising for the processing of biomaterials because it enables the production of surfaces with adjustable composition and structure. In this work, aimed at the improvement of the bioactivity of titanium, PEO has been used to grow calcium phosphide coatings on titanium substrates. The effects of the addition of magnesiu
Mat. Res.. Publicado em: 30/03/2017
-
7. Hydroxyapatite coating deposited on grade 4 Titanium by Plasma Electrolytic Oxidation
The present study reports the deposition of coating using Plasma Electrolytic Oxidation (PEO) onto grade 4 titanium to produce novel surface features. Samples were treated in an electrolytic solution of calcium acetate and sodium glycerolphosphate. The temporal evolution of hydroxyapatite coatings with high Ra roughness and a maximum thickness of 120 µm was
Mat. Res.. Publicado em: 2014-12
-
8. Thin films produced on 5052 aluminum alloy by plasma electrolytic oxydation with Red Mud-containing Electrolytes
In this paper, we propose the production of ceramic protective thin films by plasma electrolytic oxidation using red mud-containing electrolytes. The treatments were performed through the application of pulsed voltage (600 V, 200 Hz) during 300 seconds to aluminum samples immersed in electrolytic solutions with 5 g of red mud per liter of distilled water. Th
Mat. Res.. Publicado em: 2014-12
-
9. Augmentation of wear-protective coatings for non-ferrous alloys by the addition of Cr and Ni elements
A number of Al-, Mg- and Ti-base alloys were preconditioned by oxidation via Plasma-electrolytic oxidation (PEO) followed by the addition of Cr and Ni elements in the coating pores by chemical precipitation and a final stage of mechanical treatment. The overall effect was a combination of hardness and resistance to wear. PEO voltage level was found to be a f
Mat. Res.. Publicado em: 2014-12
-
10. Prà e PÃs-Tratamento por Eletro-OxidaÃÃo Associada à FotocatÃlise HeterogÃnea em uma ETA por FiltraÃÃo Direta Visando a ReduÃÃo dos Precursores dos Compostos Organoclorados / Pre and Post-Treatment by Electro-Oxidation Associated with Heterogeneous Photocatalysis on an ETA for direct filtration Aiming to Reduce Precursors of Organochlorine Compounds
This study evaluated the performance of the heterogeneous photocatalysis combined with electrooxidation compounding a hybrid photoreactor (contact time: 2.75; 5.5 and 11 min.) to pre-treat eutrophic water, comparing the use of chlorine (5 and 10 mg.L-1) and chlorine dioxide (1.2 mg.L-1), subjected to descending direct filtration (aluminum hydroxychloride at
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/10/2012
-
11. Estudo e desenvolvimento de um capacitor eletrolítico de nióbio
Procura-se encontrar uma alternativa para os atuais capacitores eletrolíticos de tântalo existentes no mercado, devido ao seu alto custo. O nióbio é um substituto em potencial, pois ambos pertencem ao mesmo grupo da tabela periódica e devido a isso têm várias propriedades físicas e químicas semelhantes. O nióbio apresenta diversas aplicações tecn
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/05/2012
-
12. Study of the oxidation 2,4-dchlorophenoxyacetic herbicide using thermal oxide electrodes / Estudo da oxidação do herbicida acido 2,4-diclorofenoxiacetico utlizando eletrodos de oxidos termicos
In this work the performance of different types of thermal oxide electrodes, which were the 70TiO2/30RuO2, 60Ta2O5/40IrO2 and b-PbO2 in the electro-oxidation of the herbicide 2,4- dichlorophenoxyacetic. A plate of platinum was used as auxiliary electrode, and the experiments were followed in water, pH 3.5, solution of potassium sulfate as electrolyte support
Publicado em: 2009