Electron Beam
Mostrando 1-12 de 206 artigos, teses e dissertações.
-
1. Monochromatic double coloring effect on V2O5 thin films deposited by electron beam
ABSTRACT Electrochromic material is a thin film technology that has a close relationship with environmental sustainability since they can control the light and heat that enter and leave a building. Vanadium oxide films are electrochemically active for lithium and electron co-intercalation, presenting low optical variation in the low energy visible light, whi
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Influence of the Pre-Treatments and Process Temperature on the Adhesion of TiN Films Deposited by PBII&D Over Nitrided Austenitic Stainless Steel
In this work the influence of pre-treatment cleaning processes in the adhesion of TiN films deposited by the plasma based ion implantation and deposition (PBII&D) process over plasma nitrided AISI 316L stainless steel was investigated, varying the gas composition, the duration of the sputtering process and the temperature in the same deposition chamber. The
Mat. Res.. Publicado em: 28/10/2019
-
3. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Estudio de la microestructura de un cordón de soldadura de un acero P91 mediante microscopía electrónica de transmisión
ABSTRACT In the present work the microstructural characterization of a single-pass weld of 9Cr1MoVNb P91 steel performed by the flux-cored arc welding (FCAW) process in the “as welding” condition has been carried out by means of transmission electron microscopy. P91 steel offers a good weldability, but the mechanical properties of the welded joints are f
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Color electron microprobe cathodoluminescence of Bishunpur meteorite compared with the traditional optical microscopy method
Abstract Cathodoluminescence (CL) imaging is an outstanding method for sub classification of Unequilibrated Ordinary Chondrites (UOC) - petrological type 3. CL can be obtained by several electron beam apparatuses. The traditional method uses an electron gun coupled to an optical microscope (OM). Although many scanning electron microscopes (SEM) and electron
REM, Int. Eng. J.. Publicado em: 2018-04
-
6. Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints
In this work, microstructural characterization and mechanical properties of P91 and Incoloy 800HT dissimilar laser beam welded joint were analyzed. In addition to that, metallographical studies were conducted using Optical microscopy, Scanning electron microscopy (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX) and X-Ray diffraction analysis (
Mat. Res.. Publicado em: 01/02/2018
-
7. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
8. Effect of Electron Beam and Gamma Rays on Carbon Nanotube Yarn Structure
Individual carbon nanotubes (CNTs) exhibit excellent mechanical, electrical and thermal properties, leading to development of a new generation of advanced lightweight materials and spacecraft electronics substituting the electronics based on silicon. The direct assembly of CNTs into macroscopic fibers or sheets has been a way to overcome their dispersion and
Mat. Res.. Publicado em: 18/09/2017
-
9. Study of PtPd Bimetallic Nanoparticles for Fuel Cell Applications
Bimetallic nanoparticles are of special interest for their potential applications for fuel cells, mainly for portable power applications. Among the bimetallic systems, Pt-Pd bimetallic nanoparticles have received great interest as they can be widely used as effective catalysts for various electrochemical reactions. In this work, Pt-Pd alloy bimetallic nanopa
Mat. Res.. Publicado em: 15/05/2017
-
10. Diamond Films on Stainless Steel Substrates with an Interlayer Applied by Laser Cladding
The objective of this work is the Hot Filament Chemical Vapor Deposition (HFCVD) of diamond films on stainless steel substrates using a new technique for intermediate barrier forming, made by laser cladding process. In this technique, a powder layer is irradiated by a laser beam to melt the powder layer and the substrate surface layer to create the interlaye
Mat. Res.. Publicado em: 06/03/2017
-
11. Electrical and Optical Transport Characterizations of Electron Beam Evaporated V Doped In2O3 Thin Films
Vanadium (5 at. %) doped Indium Oxide (V: In2O3) thin films with different thicknesses (50 nm, 100 nm and 150 nm) were prepared onto glass substrate by electron beam evaporation technique in a vacuum of about 4×10-3 Pa. X-ray diffraction (XRD) pattern revealed that the prepared films of thickness 50 nm are amorphous in nature. Temperature dependence of elec
Mat. Res.. Publicado em: 08/12/2016
-
12. Surface Modification of Aluminized Cu-10Fe Alloy by High Current Pulsed Electron Beam
A Cu-10Fe alloy with magnetron sputtered Al films was irradiated by high current pulsed electron beam (HCPEB) with various pulse numbers, next changes of its microstructure and corrosion property were investigated. Compared with the initial sample, microhardness and corrosion resistance of the aluminized Cu-10Fe alloys after the HCPEB treatment are remarkabl
Mat. Res.. Publicado em: 24/11/2016