Engineering Models
Mostrando 1-12 de 341 artigos, teses e dissertações.
-
1. Key Terrestrial and Space Environment Sources
ABSTRACT Natural (Terrestrial & Space) Environment (NE) phenomena play a significant role in the design and flight of aerospace vehicles and in the integrity of the associated aerospace systems and structures. Both the terrestrial environment (0-90 km altitude) and the space environment (Earth orbital altitudes) parameters and their engineering application p
J. Aerosp. Technol. Manag.. Publicado em: 17/01/2020
-
2. Análise da implantação de reservatórios de detenção de forma que sejam minimizados os impactos causados por inundações
RESUMO Por causa do avanço da ocupação urbana e consequente impermeabilização dos solos, ocorre um aumento do escoamento superficial, provocando, assim, inundações mais frequentes do que as que existiam quando a superfície era permeável. Este trabalho teve como objetivo propor o uso de reservatório de detenção como técnica compensatória de dren
Eng. Sanit. Ambient.. Publicado em: 20/12/2019
-
3. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
4. DESIGN OF EXPERIMENTS USED IN COMPUTER TRIALS: A SUPPORTIVE METHOD FOR PRODUCT DEVELOPMENT
ABSTRACT The study proposes the development of a framework that can take advantage of the Design and Analysis of Computer Experiments (DACE) more efficiently. The need for rapid product development cycles creates a demand for tools that aid in decision making. One of these tools is Computer Aided Engineering which uses the Finite Element Method that requires
Pesqui. Oper.. Publicado em: 23/09/2019
-
5. RELIABILITY-BASED MULTI-OBJECTIVE OPTIMIZATION APPLIED TO CHEMICAL ENGINEERING DESIGN
ABSTRACT Chemical engineering optimization represents a significant challenge due to the complexity of the mathematical models that are frequently required in this area. These models are normally associated with nonlinear equations that represent mass, energy, and momentum balances, which are submitted to physical, constitutive, environmental, and design lim
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. SENSITIVITY ANALYSIS FOR MODEL COMPARISON AND SELECTION IN TISSUE ENGINEERING
ABSTRACT Computational modeling has been proven to be very useful in tissue engineering over the past years. Because the model is a simplification of the experimental system, the processes accounted for in the model should be analyzed carefully. However, new and complex models are usually proposed without a clear comparison with the basic ones. In this study
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
7. ON THE PERFORMANCE OF DIFFERENT RANS BASED MODELS TO DESCRIBE THE TURBULENT FLOW IN AN AGITATED VESSEL USING NON-STRUCTURED GRIDS AND PIV VALIDATION
ABSTRACT The performances of the Standard κ-ε, RNG, Realizable, κ-ω and RSM turbulence models to describe the behavior of the flow in agitated tank reactors were evaluated. Because most of these tanks have complex geometries, structured meshing schemes are not a practical alternative in engineering. Two particular unstructured meshing schemes composed of
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
8. Selection of a Hyper-Elastic Material Model - a Case Study for a Polyurethane Component
Abstract The aim of this study was to select an appropriate material model for a polyurethane rail pad. The considered material was assumed to be hyper-elastic, and model selection was limited only to the Mooney-Rivlin (M-R) material models available in the MSC.Marc/Mentat system. The selection of the most appropriate material model was based on the most acc
Lat. Am. j. solids struct.. Publicado em: 27/06/2019
-
9. Modeling and Experimental Validation of Two Adjacent Portal Frame Structures Subjected to Vibro-impact
Abstract In many engineering applications, there are systems that exhibit a series of collisions in a certain amount of time, for example the impact of floating ice in ships and the rubbing between stationary and rotary parts in turbomachinery. In many of these situations, it is of vital importance to know how the impacts affect the overall system behavior f
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
10. De la sécurité des patients à la résilience des systèmes de soins: un état de l’art
Abstract Patient security has become a priority in public health policies. In 30 years, health systems have adopted the risk management tools designed for industries. The purpose of this review of the literature is to describe the current security models and approaches deployed in health systems and to explore new perspectives. The bibliographic search was c
Ciênc. saúde coletiva. Publicado em: 2019-03
-
11. Estimating design hydrographs at the basin scale: from event-based to continuous hydrological simulation
RESUMO Hidrogramas de projeto são amplamente utilizados em engenharia hidrológica. Típicas aplicações adotam métodos baseados em eventos (EB), utilizando modelos chuva-vazão para converter hietogramas de projeto em hidrogramas. Incertezas incluem a definição de condições antecedentes e a premissa de equivalência entre tempos de retorno da chuva
RBRH. Publicado em: 18/02/2019
-
12. New mathematical modelling for grain size distribution adjustment in concrete
Abstract Concrete used in civil engineering is a composite obtained from the combination of coarse and fine aggregates, cement and water, and its cost and quality are normally associated to the proportion of its constituents (ceramic formulation), as well as the reduction of water consumption. The aggregates used in concrete may have diverse origins, and the
Cerâmica. Publicado em: 2019-01