Ferric Chloride
Mostrando 1-12 de 84 artigos, teses e dissertações.
-
1. Pré-tratamento físico-químico e enzimático para efluente de abatedouro
RESUMO O efluente gerado em um abatedouro de aves, contendo gordura (quantificada pela análise de Óleos e Graxas - O&G) na concentração de 1.100 mg.L-1, foi submetido a dois pré-tratamentos para redução da concentração de material orgânico particulado: um tratamento físico-químico convencional (coagulação/floculação com cloreto férrico) ou u
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
2. EFFECTIVENESS OF PHOSPHORUS REMOVAL IN AN SBR USING CO-PRECIPITATION WITH FERRIC CHLORIDE, AND ITS EFFECTS ON MICROBIAL ACTIVITY
Abstract The present study evaluated the phosphorus removal in a Sequencing Batch Reactor (SBR - 2,500L) used to treat the wastewater from an office building in two steps: phase I-Enhanced biological phosphorus removal (EBPR) and phase II-co-precipitation using FeCl3 as precipitant. The raw sewage presented a high organic load variation ranging from 0.11 (ph
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
3. Influence of solvent used on oxidative polymerization of Poly(3-hexylthiophene) in their chemical properties
Abstract The aim of the study is to utilize the simplicity of oxidative polymerization with ferric chloride to originates poly(3-hexylthiophene) of lower molecular weight. So, the chloroform, in general used as solvent in this synthesis, was switched by dichloromethane. The obtained polymers were characterized by infrared spectroscopy (FTIR), ultra-violet v
Polímeros. Publicado em: 21/09/2018
-
4. Application of cationic hemicelluloses produced from corn husk as polyelectrolytes in sewage treatment
Hemicelluloses were extracted from corn husk and converted into cationic hemicelluloses using 2,3-epoxypropyltrimethylammonium chloride. The degree of substitution was determined as 0.43 from results of elemental analysis. The cationic derivative was also characterized by Fourier transform infrared spectroscopy and Carbon-13 magnetic nuclear ressonance. The
Polímeros. Publicado em: 26/07/2013
-
5. Pós-tratamento de efluente têxtil usando coagulação/floculação combinado com processos de separação por membranas
The textile industry uses large volumes of water in their processes, especially in the dyeing step, which are also used large quantities of coloring agents and textile auxiliaries. The presence of these products in the effluent generates a harmful effect and clearly visible to the environment because they cause changes in the parameters of the receiving body
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
6. Avaliação de diferentes coagulantes para remoção de sólidos por flotação e sedimentação de água residuária de uma indústria metal-mecânica / Evaluation of different coagulants for removal of solids by flotation and sedimentation of wastewater from a metal-mechanic industry
Uma das abordagens para minimizar o volume de captação de água potável e o descarte de efluentes é o reuso da água dentro da unidade industrial através de técnicas avançadas de tratamento como o sistema de osmose reversa, porém esse sistema exige um afluente com uma baixa quantidade de sólidos, além de outros requisitos. A água residuária utili
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2011
-
7. Effects of sulfur-based hemostatic agents and gingival retraction cords handled with latex gloves on the polymerization of polyvinyl siloxane impression materials
OBJECTIVES: This study investigated the possible interactions between three addition silicone materials (Express®, Aquasil Ultra® and Adsil®), three hemostatic agents (ferric sulfate, StatGel FS®; aluminum sulfate, GelCord®; and aluminum chloride, Hemostop®) and gingival retraction cords previously handled with latex gloves to determine whether direct
Journal of Applied Oral Science. Publicado em: 2011-12
-
8. Treatment of welding electrode manufacturing plant wastewater using coagulation/flocculation-nanofiltration as a hybrid process
High water consumption and water scarcity make industrial wastewater reuse necessary, especially in those industries characterized by polluted effluents such as welding electrode manufacturing industries. The present paper investigates the coupling of coagulation-flocculation with nanofiltration (NF) to recycle water and reuse it in the process. First, the e
Brazilian Journal of Chemical Engineering. Publicado em: 2011-03
-
9. "Resistência à Corrosão de Aços Inoxidáveis em Solução Sintética de Condensado de Álcool Combustível / "Resistência à Corrosão de Aços Inoxidáveis em Solução Sintética de Condensado de Álcool Combustível
Nowadays a great effort had been directed to research work in order to attend the environmental protection agencies demands for minimizing the levels of gases emission pollutants. The consumers requirements for more economic and durable vehicles had motivated also the researchers to look for more corrosion resistance materials in order to substitute the trad
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/02/2010
-
10. A methodology for optimising the removal of cyanobacteria cells from a brazilian eutrophic water
This work is concerned with optimizing the performance of the coagulation process in terms of the removal of intact cyanobacteria cells and saxitoxins (STX). The evaluation has been carried out through bench-scale jar tests to construct coagulation diagrams for aluminium sulphate, polyaluminium chloride (PACl) and ferric chloride. The test water was taken fr
Brazilian Journal of Chemical Engineering. Publicado em: 2010-03
-
11. Lamella sedimentation: alternative for treatment of overflow sewage - study in ETE Martim de Sá (Caraguatatuba/SP). / Decantação acelerada: alternativa para o tratamento de vazão excedente de esgoto - estudo na ETE Martim de Sá (Caraguatatuba/SP).
This study was motivated by the need to treat high wastewater influent exceeding in sewage treatment plants, which occurs on days of heavy rain. The central hypothesis of this study is that the physical-chemical process to treat dilute sewage overflow, it can be advantageous with respect to increased capacity and expansion of biological systems. The research
Publicado em: 2010
-
12. Síntese e caracterização de derivados do politiofeno para utilização em sensores / Synthesis and characterization of polythiophene derivatives and their use in VOCs sensor applications
The conjugated polymers, especially polythiophenes, have emerged as alternative materials to obtain chemically selective layers in gas sensors. The main advantages of these materials are the possibility of obtaining sensing devices that operate at room temperature and the diversity of materials. For example, a simple modification of the side chain of polythi
Publicado em: 2010