Film Coating
Mostrando 1-12 de 145 artigos, teses e dissertações.
-
1. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
2. On the Use of a TiO2 Sol-Gel for Horseradish Peroxidase Enzyme Immobilization for Development of an Amperometric Biosensor
The sol-gel technique has drawn considerable attention in the area of biomolecules immobilization by virtue of its intrinsic properties including chemical inertness, thermal stability, and good biocompatibility. The present work reports the development of a bio-sensing methodology which involves the immobilization of horseradish peroxidase enzyme (HRP) on pe
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
3. Productivity and photosynthetic pigments in bell pepper plants grown in soil with biofertilizer and protected against water loss
ABSTRACT The search for techniques that maximize the use of water is becoming necessary for the sustainability of agriculture in semi-arid areas. In this sense, the present work aimed to evaluate the effects of soil protection against water loss and the use of bovine biofertilizer on fruit production and chlorophyll content in bell pepper plants. The experim
Rev. Ceres. Publicado em: 2021-02
-
4. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
5. Effect of DLC Films with and without Silver Nanoparticles Deposited On Titanium Alloy
Resumo O filme de carbono semelhante a diamante (DLC) é um material de revestimento duro e biocompatível que pode impedir a corrosão com liberação de íons metálicos. Este estudo avaliou as características estruturais do filme de DLC, com e sem nanopartículas de prata (Ag), depositadas por plasma (PECVD) em liga de titânio (Ti-6Al-4V) e formação �
Braz. Dent. J.. Publicado em: 28/11/2019
-
6. Performance eletrocatalítica frente a nitrito de um filme híbrido de fosfomolibdato e sílica organomodificada
RESUMO Materiais híbridos orgânico-inorgânicos nanoestruturados são produzidos com a finalidade de desenvolver e/ou aprimorar uma propriedade de interesse. Uma forma de obtenção de materiais híbridos é através da imobilização de um componente inorgânico em uma rede de sílica organicamente modificada (ormosil). Neste trabalho, um polioxometalato
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel
ABSTRACT This work studies the high temperature corrosion behavior of new heat-resistant steel with salt coating method of 75%Na2SO4+25%NaCl coating on the steel surface at 700ºC. The chemical composition of corrosion products and surface morphology of the corrosion layer were analyzed using X-ray diffractometer (XRD), scanning electron microscopy (SEM), en
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
9. Influência da densidade de potência e da porcentagem de N2 na atmosfera de deposição na dureza e no módulo de Young em filmes de aço inoxidável AISI 316 depositados por pulverização catódica
RESUMO O processo de recobrimento por pulverização catódica é uma técnica amplamente utilizada para produção de revestimentos metálicos e cerâmicos, devido a versatilidade no controle das propriedades com pequenas mudanças nos parâmetros de processo, como densidade de potência aplica ao cátodo magnetron e atmosfera de trabalho. Sendo assim, as p
Matéria (Rio J.). Publicado em: 20/05/2019
-
10. Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials
The silicon alkoxides-based coating is an alternative to control the release of cytotoxic ions through metal implants. This study evaluated the influence of the number of layers of a hybrid coating on the surface of austenitic stainless steel AISI 316L on the corrosion resistance. This coating was produced from the precursors of silicon alkoxides 3-(trimetho
Mat. Res.. Publicado em: 11/03/2019
-
11. Study of the Corrosive Behavior of the AISI 1020 Steel in Acid Crude Oil by Microscopic Techniques (LM, AFM and SEM/EDX) and Raman Spectroscopy
Microscopic techniques were combined to study the influence of corrosion rate on the morphologic behavior of AISI 1020 steel specimens submitted to thermal degradation of a typical acid crude oil (total acid number (TAN) = 2.1390 mg KOH g-1 and total sulfur (S) = 0.7778 wt.%). The techniques used were light microscopy (LM), scanning electron microscopy/energ
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
12. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018