Finite Elements Method Fem
Mostrando 1-12 de 64 artigos, teses e dissertações.
-
1. 3D Simulation and Artificial Neural Networks Application in the Diffusion Study of Champignon Mushroom/Solution Interface During the Salting
The influence of the film formed during the salting of champignon mushrooms with brine containing NaCl and KCl was modeled using the finite elements method (FEM). It was verified that the film formed on the mushroom surface had a greater influence in the static salting since the diffusion of the ions was 7.5-fold smaller in this system than in the stirred sa
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Unplanned dilution back analysis in an underground mine using numerical models
Abstract In underground mines, stability problems can cause unplanned dilution, increasing the costs of mining operations, such as loading, transport, crushing and grinding. This is usually dealt with by simply increasing investments with support. However, the design geometry of stopes and drifts also has a great effect on a stope’s stability. The use of e
REM - International Engineering Journal. Publicado em: 2022
-
3. GPU Finite Element Method Computation Strategy Without Mesh Coloring
Abstract A GPU-adapted Finite Element Method (A-FEM) implementation without using a mesh coloring strategy to avoid race conditions is presented. All the elements are simultaneously processed, and the local data is computed and consolidated into the device memory in a new adapted Coordinate Format data structure (a-COO). The comparison between the proposed s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
4. Mathematical Modeling of the Transesterification Reaction by Finite Elements: Optimization of Kinetic Parameters Using the Simplex Sequential Method
The use of biodiesel as fuel has been presented as a viable alternative in the search for renewable energies. It can be produced from the transesterification reaction of vegetable oils with methanol in the presence of sodium or potassium hydroxide as catalysts. In the present research, the transesterification reaction of soybean oil was modeled considering t
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
5. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
6. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
7. Thermo-mechanical analysis of mass concrete elements made of rubberized concrete
Resumo Neste estudo, foram avaliadas amostras de concreto massa com borracha (concreto emborrachado) para determinar se a adição de partículas de borracha aumentaria a resistência à fissuração devido a variações volumétricas de origem térmica, em comparação com um concreto de referência, sem borracha. Amostras dos concretos estudados foram inic
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
8. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
9. Numerical analysis of reinforced concrete asymmetric cross-section beams under oblique bending
Abstract The problem of symmetric cross-section beams under oblique bending is well known to professional designers and academy. In fact, symmetric elements make up most of the cross-sections defined in design. The case of the asymmetric cross-sections is, however, little discussed in literature, but is a particular problem, especially in bridge girder desig
REM, Int. Eng. J.. Publicado em: 2019-06
-
10. Contact phenomena modeling in biological structures on the example of the implant-bone
Abstract The work presents modeling of interface phenomena in biological structures. Selected ways of numerical modeling of phenomena at the boundary of two materials by means of FEM methods are discussed. The work focuses on phenomena related to biological structures and their mutual interactions. Using an example of an implant-bone system, various techniqu
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
11. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 07/01/2019
-
12. Influence of film coefficient during multicomponent diffusion – KCl/NaCl in biosolid for static and agitated system using 3D computational simulation
Abstract The influence of film coefficient formed during the diffusion of inorganic salts (NaCl and KCl) in biosolids was studied using a 3D computer modeling by Finite Elements Method (FEM) in COMSOL Multiphysics® software combined with SOM-type Artificial Neural Networks (ANN). Such tools have shown that the influence of the film formed in the biosolid/s
Food Sci. Technol. Publicado em: 20/12/2018