Finite Strain
Mostrando 1-12 de 176 artigos, teses e dissertações.
-
1. Strain Analysis in Cementless Hip Femoral Prosthesis using the Finite Element Method – Influence of the Variability of the Angular Positioning of the Implant
Resumo Objetivo Avaliar a influência da variação do posicionamento da prótese femoral do quadril na tensão e na deformação produzidas neste implante. Métodos Utilizou-se a análise de tensão e de deformação da prótese femoral (Taper, Víncula, Rio Claro, SP, Brasil) pelo método de elementos finitos (MEF) de acordo com a norma ISO 7206-6 Implan
Revista Brasileira de Ortopedia. Publicado em: 2022
-
2. Numerical analysis of soft soil improved with stone column technique
Abstract The present research aims to do a numerical study on the behavior of a test embankment reinforced with stone column spacing of 1.85 m in a square grid with an average diameter of 1.0 m and 11.35 m length. The case study investigated the work in a steel company (ThyssenKrupp), located in Santa Cruz, western region of Rio de Janeiro - Brazil, where a
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
4. Hardening and Dynamic Recovery During Hot Compression Test of Copper Simulated as Viscoplastic Material
The Norton-Bailey equation was used to simulate by finite elements the hardening and dynamic recovery of copper during the hot compression tests. The constants of Norton-Bailey equation were determined from the Voce-Kocks model. The simulation assumes a Mortar Contact with Coulomb friction and axial symmetry. Numerical results were compared with experiments.
Mat. Res.. Publicado em: 05/12/2019
-
5. Numerical implementation of a micromechanics-based viscoelastic model for geomaterials with isotropically distributed micro-fractures
Abstract The constitutive behavior of geomaterials is generally affected by the presence at different scales of discontinuity surfaces with different sizes and orientations. According to their mechanical behavior, such discontinuities can be distinguished as cracks or fractures. Fractures are interfaces that can transfer normal and tangential stresses, where
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
6. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
8. Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk
The microstructure and texture distribution of a Ti-1023 forged disk were investigated by scanning electron microscopy and synchrotron-based high-energy X-ray diffraction. The finite element method was used to simulate temperature and strain distribution in order to investigate the relationship of the α/β forging process with microstructure and texture dis
Mat. Res.. Publicado em: 30/09/2019
-
9. A simple spline finite strip for buckling analysis of composite cylindrical panel with cutout
Abstract In this study, a new sub-parametric strip element is developed to simulate the axially loaded composite cylindrical panel with arbitrary cutout. For this purpose, a code called SSFSM is developed in FORTRAN to analyze the buckling of panels. The first order shear deformation theory is used to form the strain-displacement relations. Spline and Lagran
Lat. Am. j. solids struct.. Publicado em: 30/09/2019
-
10. Computational algorithm for the verification of reinforced concrete sections in fire situation
Resumo As estruturas de concreto armado podem ter sua capacidade resistente reduzida devido à degradação de suas propriedades mecânicas com a temperatura, aumentando o risco de colapsos estruturais. Assim, o dimensionamento de uma estrutura deve considerar seu comportamento em temperatura ambiente e em situação de incêndio (ABNT NBR 14432:2001). Neste
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
11. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019