Finite Systems
Mostrando 1-12 de 312 artigos, teses e dissertações.
-
1. Mathematical Modeling of the Film Influence on the Salting Time of Mozzarella Cheese in a Static and Dynamic System: Application of Artificial Neural Networks of the Multilayer Perceptron Type
The NaCl and KCl diffusion in the film formed on the cheese surface during salting was simulated by the finite element method. The time and salts concentration values on the cheese surface were determined, tabulated, and presented to the multilayer perceptron neural network (MLP) for the regression modeling. The samples were divided into 70, 15 and 15% for t
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
3. Two-dimensional beams in rectangular coordinates using the radial point interpolation method
Abstract The three-dimensional Theory of Elasticity equations lead to a complex solution for most problems in engineering. Therefore, the solutions are typically developed for reduced systems, usually symmetrical or two-dimensional. In this context, computational resources allow the reduction of these simplifications. The most recognized methods of algebraic
REM, Int. Eng. J.. Publicado em: 2020-03
-
4. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. Flexure Based Energy Dissipating Device in Self-Centering Braces
Abstract Self-centering braces, in the current stage of development can accommodate large deformation and force levels. However, there is still a need for improvement of the energy dissipation mechanisms commonly incorporated in these braces. Yield based energy dissipation systems can overcome some of the problems faced with friction-based devices, such as s
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
6. Numerical fundamentals and interactive computer graphics system for the nonlinear analysis of planar frames
Abstract Recent scientific and computational advances have facilitated the analysis of slender structural systems subject to instability. With the employment of more sophisticated numerical tools and algorithms, it is possible to accurately determine the critical points (limit and bifurcation loads) as well as the post-critical behavior of the structural sys
REM, Int. Eng. J.. Publicado em: 2019-06
-
7. Comparison of two asymmetric headgear force systems: A finite element analysis
Resumo Objetivo: o objetivo desse estudo foi usar o método de elementos finitos 3D para avaliar o efeito no padrão de deslocamento dos molares em resposta ao uso de aparelhos extrabucais com diferentes forças assimétricas. Métodos: foram confeccionados 25 aparelhos extrabucais (AEB) com diferenças, entre os lados direito e esquerdo, quanto ao compri
Dental Press J. Orthod.. Publicado em: 20/05/2019
-
8. Experimental and numerical modeling of horizontally-bent buried pipelines crossing fault slip
Abstract The behavior and response of pipelines subjected to slip fault movement is studied by numerical simulations as well as experimental setup. A finite element modeling is also developed via ABAQUS software. In this study, an artificial accelerogram is applied to the system and matched against the response spectrum according to the standard No. 2800 (Ir
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
9. Forage sorghum-legumes intercropping: effect on growth, yields, nutritional quality and economic returns
ABSTRACT Cereal-legumes intercropping is among the most economical and effective agronomic strategies to boost forage biomass production, nutritional quality and monetary returns. This review synthesizes the research findings on how intercropping affects productivity, quality, competitiveness and economic viability of sorghum-legumes mixed, row and strip int
Bragantia. Publicado em: 03/12/2018
-
10. Structural Health Monitoring of Sandwich Structures Based on Dynamic Analysis
Abstract This work aims to contribute to the development of SHM systems based on vibration methods to be applied on sandwich structures. The main objective is focused on experimental damage identification via changes in the Frequency Response Function (FRF) with the usage of damage metrics. Specimens of sandwich structures made from skins of epoxy resin rein
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
11. Dynamic analysis of gun barrel vibrations due to effect of an unbalanced projectile considering 2-D transverse displacements of barrel tip using a 3-D element technique
Abstract In this paper, dynamic analysis of two different weapon systems (35 mm Anti-Aircraft Barrel (AAB) and 120 mm Grooved Tank Barrel (GTB)) under the effect of statically unbalanced projectile has been performed with a new 12 DOF 3-D element technique using Finite Element Method (FEM). The muzzle deviations, which negatively affect the barrel shooting a
Lat. Am. j. solids struct.. Publicado em: 06/08/2018
-
12. Numerical analysis of truss systems with stiffened flattened end-bars
Abstract Circular hollow sections are usually used in long-span roof truss systems. One of the typology for connecting elements in such structures involves the flattening of bar ends. This article presents the numerical analysis of a plane truss composed of circular hollow sections, in which diagonal bars have flattened ends. In this sense, a new flattening
Lat. Am. j. solids struct.. Publicado em: 03/05/2018