Flow In Porous Media
Mostrando 1-12 de 77 artigos, teses e dissertações.
-
1. Numerical Study for Two-Phase Flow with Gravity in Homogeneous and Piecewise-Homogeneous Porous Media
RESUMO Neste trabalho estudamos o escoamento bifásico com gravidade em meios homogêneos de 1-rocha ou em meio composto de 2-rochas, estes fenômenos podem ser modelado por uma lei de conservação escalar não-linear com funçãao de fluxo contínua ou função de fluxo descontínua, respectivamente. Nosso estudo é essencialmente de um ponto de vista num�
TEMA (São Carlos). Publicado em: 2020-04
-
2. PHYSICAL AND THERMAL PROPERTIES OF EUCALYPTUS WOOD CHARCOAL.
ABSTRACT The knowledge of the physical and thermal properties of eucalyptus charcoal is of fundamental importance in the design of equipment and development of cooling technologies. However, literature about physical properties for eucalyptus wood charcoal is largely unavailable, especially the thermal and aerodynamic properties, for the same material. The a
CERNE. Publicado em: 2020-03
-
3. Design and analysis of different models of microfluidic devices evaluated in Enhanced Oil Recovery (EOR) assays
ABSTRACT Microfluidic devices are a new platform for Enhanced Oil Recovery (EOR) assays. The application of Colloidad Dispersion Gels (CDG) injection method has been proposed in recent years. However, the mechanism of oil recovery enhancement has not been completely elucidated. Its purpose is to mobilize oil by decreasing the permeability of channeled zones.
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process
ABSTRACT Resin Transfer Molding (RTM) process is commonly used to produce high quality polymeric composites with simple or complex geometries in small to large sizes. In RTM process a preformed reinforcement is positioned inside the mold cavity. This dry reinforcement is actually a fibrous porous media whereby resin will flow. The mold is then closed and res
Matéria (Rio J.). Publicado em: 20/07/2017
-
5. EFFECT OF NON-DARCY FLOW COEFFICIENT VARIATION DUE TO WATER VAPORIZATION ON WELL PRODUCTIVITY OF GAS CONDENSATE RESERVOIRS
Abstract Well productivity of gas condensate reservoirs is highly affected by near-wellbore phenomena. Inertial force resulting from convective acceleration of fluid particles in the medium, as well as viscous force, determines the flow of gas through porous media at high velocity. Pressure drop builds up the molar content of water in gas by water vaporizati
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
6. ESTUDO EXPERIMENTAL DA COMBUSTÃO DO GLP E GLICEROL RESIDUAL DERIVADO DA PRODUÇÃO DE BIODIESEL EM MEIOS POROSOS RADIANTE / EXPERIMENTAL STUDY OF LPG COMBUSTION OF GLYCEROL AND RESIDUAL DERIVED FROM BIODIESEL PRODUCTION IN RADIANT POROUS MEDIA
The increasing production of biodiesel has caused increased production of residue glycerol. The large amount of glycerin (our glycerol) in the market causes a surplus unusable commercially and industrially, which should give a correct destination. At this point, the porous combustion is characterized by burning within an inert medium, to the pollutants reduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
7. Three-dimensional numerical modeling of RTM and LRTM processes
Resin Transfer Molding (RTM) is a manufacturing process in which a liquid resin is injected into a closed mold pre-loaded with a porous fibrous preform, producing complex composite parts with good surface finishing. Resin flow is a critical step in the process. In this work, the numerical study of the resin flow in RTM applications was performed employing a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06
-
8. NUMERICAL ANALYSIS OF THE FLOW OF EMULSION THROUGH STRAIGHT AND CONSTRICTED CAPILLARIES / ANÁLISE NUMÉRICA DO ESCOAMENTO DE EMULSÕES ATRAVÉS DE CAPILARES RETOS E CAPILARES COM GARGANTA
Emulsion can be used as a mobility control agent in enhanced oil recovery methods in order to achieve a more efficient sweep of the reservoir. The application of such technique requires full understanding of how emulsions flow in a porous material. The macroscopic flow behavior can be determined based on the pore scale flow, at which emulsions cannot be trea
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/09/2011
-
9. Desenvolvimento de método para medida de permeabilidade superficial de revestimentos de argamassa. / Development of method for measuring the surface permeability of coating mortar.
The phenomenon of permeability refers to the ability with which a fluid is transported through a porous medium, driven by pressure gradient between the material and the external environment. Degradation agents are conducted to the interior of mortar and concrete driven through such a phenomenon. Therefore, it is the permeability as a key parameters for durab
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/05/2011
-
10. AVALIAÇÃO DE SOLUÇÕES NUMÉRICAS PARA ANÁLISE DE FLUXO BIFÁSICO COM ACOPLAMENTO GEOMECÂNICO EM MEIOS POROSOS HETEROGÊNEOS / EVALUATION OF NUMERICAL SOLUTIONS FOR ANALYSIS OF COUPLED TWO-PHASE FLOW WITH GEOMECHANICAL BEHAVIOR IN HETEROGENEOUS POROUS MEDIA
O acoplamento fluido-mecânico como é conhecido o efeito tanto do meio poroso no meio fluido, quanto do efeito do meio fluido no meio poroso, possui uma ampla aplicabilidade em diversos campos da engenharia, tornando-se um importante objeto de estudo. O presente trabalho analisa alguns modelos acoplados de deformação e fluxo, particularmente fluxo bifási
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2011
-
11. Escoamento de fluidos complexos e transporte de partÃculas em geometrias irregulares. / Complex fluid flows and particle transport in irregular geometries.
In this work many types of incompressible laminar Newtonian and Non-Newtonian flows are studied. The interplay of these flows with complex geometries was investigated using computational modeling and numerical solution of the conservation of momentum and mass continuity equations. As a first step, the computational modeling of a network of pores was adopted
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/04/2011
-
12. Isotropic damage phenomena in saturated porous media: a bem formulation / Dano isotrópico em meios porosos saturados: uma formulação do método dos elementos de contorno
This work is devoted to the numerical analysis of saturated porous media, taking into account the damage phenomenon on the solid skeleton. The porous media is taken into poroelastic framework, in full-saturated condition, based on the Biots Theory. A scalar damage model is assumed for this analysis. An implicit Boundary Element Method (BEM) formulation, base
Publicado em: 2011