Fluid Simulation
Mostrando 1-12 de 287 artigos, teses e dissertações.
-
1. APLICAÇÃO DA FLUIDODINÂMICA COMPUTACIONAL (CFD) E ANÁLISE DE ACELERANTES NA INVESTIGAÇÃO DE INCÊNDIO
Fire investigation is a complex activity that involves skill, technology, knowledge and science and aims to elucidate fire-related events such as cause, origin, propagation, phenomena, etc. Chemical analysis to verify the presence of foreign substances in that location, as well as the use of fire simulation software are efficient and economical ways to study
Quím. Nova. Publicado em: 2020-05
-
2. STUDY OF SOLUBILITY IN SUPERCRITICAL FLUIDS: THERMODYNAMIC CONCEPTS AND MEASUREMENT METHODS - A REVIEW
Abstract Due to the importance of supercritical fluid technology (SFT) in different industries, it has been the subject of intense research in recent decades. Solubility is a key concept in SFT. In fact, obtaining knowledge about the theoretical concepts of solubility and related experimental measurement methods can be useful in developing and improving the
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
3. PREPARATION AND SIMULATION OF THE ON-LINE SiO2/S COATING FOR COKING INHIBITION IN THE INDUSTRIAL CRACKING FURNACE
Abstract Coke formation inside radiant coils is one of the main problems during thermal cracking of hydrocarbons. The on-line preparation of the coating for coking inhibition is a promising technology because it provides more flexibility to the operators on site. The SiO2/S coating was prepared on the inner surface of coils in an 8-year-served GK-VI industri
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
4. Numerical Simulation of a Pitching Airfoil Under Dynamic Stall of Low Reynolds Number Flow
ABSTRACT: In this research, viscous, unsteady and turbulent fluid flow is simulated numerically around a pitching NACA0012 airfoil in the dynamic stall area. The Navier-Stokes equations are discretized based on the finite volume method and are solved by the PIMPLE algorithm in the open source software, namely OpenFOAM. The SST k - ω model is used as the tur
J. Aerosp. Technol. Manag.. Publicado em: 14/11/2019
-
5. Numerical study of upstream disturbances on the performance of electromagnetic and ultrasonic flowmeters
ABSTRACT Electromagnetic and ultrasonic flowmeters are high precision devices that can measure the water flow in pressurized irrigation networks. In these networks, the inadequate installation distance of flow control valves generates upstream disturbances which will increase measurement errors and reduce the accuracy of the equipment. Therefore, estimating
Sci. agric. (Piracicaba, Braz.). Publicado em: 04/11/2019
-
6. Model of single-sized endotracheal tube for adults
RESUMO Objetivo Simular diferentes diâmetros de tubos endotraqueais e verificar os aspectos fluidinâmicos, considerando medições de fluxo e resistência. Métodos Foi utilizado um software de fluidinâmica para calcular o fluxo médio e a resistência das vias aéreas nos tubos endotraqueais com diâmetro de 6,0, 7,0, 7,5, 8,0, 9,0 e 10,0mm, em tempera
Einstein (São Paulo). Publicado em: 17/10/2019
-
7. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
8. Thermal simulation of prisms with concrete blocks in a fire situation
Resumo O presente trabalho tem como objetivo verificar a capacidade de isolamento térmico de alvenarias constituídas por blocos de concreto em situação de incêndio por meio da simulação térmica de prismas. Inicialmente, para a validação das propriedades térmicas do bloco com um experimento fornecido por uma empresa, foi simulado um prisma com reve
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
9. SIMULATION OF THERMAL DECOMPOSITION IN AN OPEN CAVITY: ENTROPY ANALYSIS
ABSTRACT This paper presents a numerical analysis of entropy generation in a two-dimensional rectangular channel where the inlet flow undergoes thermal decomposition resulting from a chemical reaction. The model considered viscosity and thermal conductivity to be dependent of temperature. Irreversibility due to mass transport was included in the entropy gene
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
10. Uma interface de controle para a Fluidodinâmica Computacional
Resumo Neste artigo apresentaremos uma proposta para a utilização da dinâmica de fluidos computacional sob uma perspectiva educacional, tendo como alvo as disciplinas de mecânica dos fluidos e fenômenos de transporte, nos períodos iniciais de cursos de Engenharia e Física. A importância da utilização da simulação na formação de base é amplamen
Rev. Bras. Ensino Fís.. Publicado em: 27/06/2019
-
11. Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
ABSTRACT The objective of the present work was to verify and optimize the die design to manufacture a thermoplastic profile in rigid PVC using the simulation of the flow in the mentioned matrix through the use of Computational Fluid Dynamics (CFD) and through tests in extrusion, using an experimental calibrator, the required geometry and dimensions were obta
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Simulación matemática para la optimización del patrón de flujo entregado por una buza para el molde de colada continua de planchón delgado
ABSTRACT Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant productivity and the final product quality. To achieve this, we conducted a study of the effect of the internal design of the nozzl
Matéria (Rio J.). Publicado em: 19/07/2018