Force Spectroscopy
Mostrando 1-12 de 190 artigos, teses e dissertações.
-
1. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Hybrid Hydrogels Based on Polyethylene Glycol Bioconjugated with Silylated-Amyloidogenic Peptides
Hybrid-peptide hydrogel arrangements are a promising alternative to obtaining biocompatible structures at the nanoscopic scale. In this work, a new class of hybrid hydrogels was obtained through the sol-gel process based on the reaction between an amyloid-like octapeptide sequence [RF]4 (where R = arginine and F = phenylalanine) covalently bonded with glycin
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. CHARACTERIZATION OF INTERACTION BETWEEN BUDDLEOSIDE AND BOVINE SERUM ALBUMIN
The primary objective of this study was to investigate the binding of buddleoside to bovine serum albumin (BSA) by different analytical techniques. The analytical principles of affinity capillary electrophoresis (ACE) and fluorescence spectroscopy used in the experiments were different. Mobility (M) that is independent of viscosity of the operating buffer an
Quím. Nova. Publicado em: 20/07/2020
-
4. Chemically Reduced Graphene Oxide on Gold Electrodes from Recordable CDs: Characterization and Potential Sensing Applications
This work presents the development and characterization of a new chemically modified electrode exploiting recordable Au-rewritable compact discs (AuCDs) as substrate for drop casting of a chemically-reduced graphene-oxide slurry focusing on simple and low-cost electrochemical sensors. Increase in electrochemical responses in cyclic voltammetric and amperomet
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
5. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
6. Plasma Treatment of Polyamide Fabric Surface by Hybrid Corona-Dielectric Barrier Discharge: Material Characterization and Dyeing/Washing Processes
In this study, the hybrid corona-dielectric barrier discharge plasma treatment was employed to modify the physical, chemical and morphological characteristics of a half-knitted fabric composed of 92% polyamide 6.6 and 8% elastane (PA). These properties of the fabric were evaluated by the water contact angle, x-ray diffraction, infrared spectroscopy, scanning
Mat. Res.. Publicado em: 28/11/2019
-
7. Influence of doping with Sm3+ on photocatalytic reuse of ZnO thin films obtained by spin coating
ABSTRACT The difficulty in the powder reuse favors the study of materials in the form of thin films. ZnO based films have high photocatalytic potential. In this work, ZnO:xSm3+ (x = 0, 1, 2 and 4 %mol) thin films were prepared by spin coating method. The resins obtained to manufacture the thin films were prepared by complex polymerization method. The samples
Matéria (Rio J.). Publicado em: 25/11/2019
-
8. Electrospinning synthesis and assessment of physicochemical properties and biocompatibility of cobalt nitrate fibers for wound healing applications
Abstract: The aim of this study was to develop polyurethane (PU) wound dressing incorporated with cobalt nitrate using electrospinning technique. The morphology analysis revealed that the developed composites exhibited reduced fiber and pore diameter than the pristine PU. The electrospun membranes exhibited average porosity in the range of 67% - 71%. Energy-
An. Acad. Bras. Ciênc.. Publicado em: 29/07/2019
-
9. Factorial design to obtain magnetized poly(ethyl acrylate-co-divinylbenzene)
Abstract Magnetized polymers are produced by incorporating magnetic particles in a polymeric matrix. This article describes the use of the suspension polymerization technique using ethyl acrylate and divinylbenzene as monomers, in the presence of heptane and/or toluene as diluent, initiated by free radicals. To produce the polymer, we first performed fractio
Polímeros. Publicado em: 04/07/2019
-
10. Blood compatibility assessments of electrospun polyurethane nanocomposites blended with megni oil for tissue engineering applications
Abstract: Tissue engineering holds as a prominent technique to repair or replace the damaged human parts to recreate its native function. In this research, a novel scaffold based on polyurethane (PU) comprising megni oil was electrospun for tissue engineering applications. The obtained polyurethane blended with megni oil nanofibers were characterized by scan
An. Acad. Bras. Ciênc.. Publicado em: 19/06/2019
-
11. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
12. Development and Characterization of PbI2 Nanoparticles for all Solid-State Flexible Supercapacitor Purposes
The development and utilization of new energy sources has been extensively studied in the world. Here, we report the development of flexible self-supported metal-free electrodes based on non-oxidized graphene multilayer (MLG) paper containing the lead iodide nanoparticles (PbI2-NPs). The PbI2-NPs was obtained and characterized by X-ray diffraction (XDR) and
Mat. Res.. Publicado em: 20/05/2019