Fracturing
Mostrando 1-12 de 78 artigos, teses e dissertações.
-
1. A review of the benefits for comminution circuits offered by rock blasting
Abstract Rock blasting is the first phase of comminution, completed by mechanical means downstream in the crushing and milling phases. Nevertheless, mineral processers and blasters seldom work together. The total energy of mechanical comminution depends on feeding grain size and on the internal resistance of the material to grinding. Blasting heavily influen
REM, Int. Eng. J.. Publicado em: 2019-03
-
2. Development of metakaolin and geopolymer proppants with nanocarbon materials
Abstract From the first hydraulic fracturing in the 40’s until nowadays, the techniques of each process step have evolved significantly. This study presents a new approach on the development of metakaolin (MK) and geopolymer based proppant with and without nanocarbon materials such as multi-walled carbon nanotubes and graphene oxide. For manufacturing the
Cerâmica. Publicado em: 2019-01
-
3. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
5. Effect of Thermal Treatment on the Dynamic Behaviors at a Fixed Loading Rate of Limestone in Quasi-vacuum and Air-filled Environments
Abstract Thermal damage in rock engineering occurs in the air-filled and quasi-vacuum environments of rock mass located near or far from the free surface. Meanwhile, dynamic loads are encountered frequently in engineering practice. In this study, 39 limestone samples are prepared, and a series of laboratory tests, including split Hopkinson pressure bar (SHP
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
6. Experimental study on the self-suspending proppant-laden flow in a single fracture
Abstract The flow of proppant-laden fluid (PLF) in the fracture is a typical problem of solid-liquid two phase flow, and the transportation and deposition of proppants are essential to determine the flow conductivity of hydraulic fracturing. The self-suspending proppant with a water soluble surface coating is a newly presented supporting material and has gre
REM, Int. Eng. J.. Publicado em: 2018-04
-
7. Structural and mechanical properties of a giomer-based bulk fill restorative in different curing conditions
ABSTRACT Objective: The main goal of this study was to compare the polymerization degree of bulk-fill giomer resin cured with three different light-curing units (LCUs): a polywave third-generation (Valo); a monowave (DemiUltra: DU); and a second-generation LED (Optima 10: Opt) LCUs by using structural and mechanical properties. Material and methods: Giomer
J. Appl. Oral Sci.. Publicado em: 18/01/2018
-
8. EFFECTS OF NANOPARTICLES AND SURFACTANT CHARGE GROUPS ON THE PROPERTIES OF VES GEL
Abstract Application of viscoelastic surfactant (VES) fluids in hydraulic fracturing is still in the development stage, though shear thinning behavior and water solubility are the two important characteristics behind increasing interest in their use in fracturing jobs. Effects of ionic characteristics and the concentration of different surfactants on the rhe
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
9. Slope stability analysis at highway BR-153 using numerical models
Abstract An existing cut slope on Highway RS-471/BR-153 is studied. The slope is composed of the Serra Geral Formation's material: a highly altered volcanic breccia and above it a slightly altered and very fractured rhyolite. A numerical analysis of the slope is carried out in two dimensions. Fracturing of the rhyolite necessitates the use of a constitutive
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
10. Mechanical testing of thin-walled zirconia abutments
Although the use of zirconia abutments for implant-supported restorations has gained momentum with the increasing demand for esthetics, little informed design rationale has been developed to characterize their fatigue behavior under different clinical scenarios. However, to prevent the zirconia from fracturing, the use of a titanium connection in bi-componen
J. Appl. Oral Sci.. Publicado em: 2013-02
-
11. Investigação experimental sobre a geração, visualização e avaliação da condutividade de fraturas ácidas em carbonatos microbiais / Experimental investigation of the building, visualization and evaluation of acid fracture conductivity on microbial carbonates
O sucesso da estimulação por fraturamento hidráulico ou ácido é dependente da geração de condutividade. No fraturamento hidráulico sustentado, a condutividade é gerada pela introdução de uma quantidade significativa de um agente de sustentação granular e praticamente esférico. No fraturamento ácido, a condutividade é gerada por irregularidade
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/07/2011
-
12. Zoneamento geotécnico com base em krigagem ordinária e equações multiquádricas: barragem de Itaipu / Geotechnical zoning based in ordinary kriging and multiquadric equations: Itaipu Hydroelectric Power Plant
This thesis presents a study based on the zoning of geotechnical parameters resulting from core boring, carried out in the basaltic bedrock located in the area of the Itaipu Hydroelectric Power Plant (Foz do Iguaçu - PR). These zonings were carried out based on the interpolation of the data by means of ordinary kriging and multiquadric equations. The data p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/10/2010