Fume
Mostrando 1-12 de 88 artigos, teses e dissertações.
-
1. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Investigación de diseños de mezcla para producir Ultra High Performance Fiber Reinforced Concrete (UHPFRC) usando ANOVA
ABSTRACT An experimental study is presented to produce Ultra High Performance Fiber Reinforced Concrete (UHPFRC) including industrial waste in the mix, and determine the average compressive strength. The study includes factor arrangements to perform analysis of variance using ANOVA. The controllable factors were: (i) age of the sample; (ii) granulometry of t
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Concretos com agregados reciclados de resíduos de construção e demolição e adições minerais: uma análise bibliográfica
RESUMO Os impactos ambientais causados pela produção do concreto precisam ser reduzidos para torná-lo um material mais sustentável. O uso de agregados reciclados em substituição aos agregados naturais e das adições minerais em substituição parcial ao cimento são alternativas que podem tornar o concreto um material com menor carga de poluentes asso
Matéria (Rio J.). Publicado em: 10/06/2019
-
4. Determination of the optimal replacement content of Portland cement by stone powder using particle packing methods and analysis of the influence of the excess water on the consistency of pastes
Resumo O cimento Portland é considerado o componente de base com o maior impacto ambiental na construção civil, em termos de emissões de CO2. Quanto aos agregados, o processo de cominuição das rochas, além da areia artificial, gera pó de pedra que acaba sendo armazenado ao ar livre, gerando impactos ambientais. Assim, a substituição do cimento por
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
5. On The Mechanical Behavior of Metakaolin Based Geopolymers Under Elevated Temperatures
Geopolymers may be described as solid and stable synthesized aluminosilicate materials, whose properties are generally believed to provide a superior durability behavior. The work in hand presents the results of an experimental investigation on the thermomechanical behavior of geopolymer matrices composed by metakaolin (MK), silica fume (SF) and blast furnac
Mat. Res.. Publicado em: 13/07/2017
-
6. Microstructure and hardness of cement pastes with mineral admixture
ABSTRACT Portland cement pastes are highly heterogeneous material and exhibits heterogeneous features over a wide range of length scales. Mechanical properties of microstructure can be determined using depth-sensing indentation. Coupled indentation/SEM technique can be used to location the indents and provides a way to determine the mechanical properties of
Matéria (Rio J.). Publicado em: 22/06/2017
-
7. Mechanical properties and microstructure of high performance concrete containing stabilized nano-silica
ABSTRACT Nanotechnology can significantly improve the mechanical strength and durability of concrete. At the nanoscale, good dispersion of constituent materials is an essential factor for the improvement of concrete properties. In this scenario, the objective of this research was to evaluate the mechanical properties of high performance concrete containing s
Matéria (Rio J.). Publicado em: 01/06/2017
-
8. Technical viability of self-compacting concretes with by-products from crushed coarse aggregate production
Abstract The main objective of this work is to present the technical viability of Self Compacting Concretes (SCC) containing by-products from crushed coarse aggregate production. For this purpose, a vast characterization of these by-products was made; six mixtures of SCC were produced using two different aggregates: granite and mica schist. The binder/dry ag
REM, Int. Eng. J.. Publicado em: 2016-09
-
9. Depósitos auríferos em metaturbiditos, lineamento Córrego do Sítio, Quadrilátero Ferrífero, Brasil
O estudo da geologia e paragênese do lineamento aurífero Córrego do Sítio foi conduzido, contendo os depósitos Cachorro Bravo, Laranjeiras e Carvoaria. Esses depósitos auríferos, do tipo lode, hospedados em sequência metaturbidítica ocorrem na região do Quadrilátero Ferrífero, Minas Gerais, Brasil. Esses três importantes depósitos são descrito
Braz. J. Geol.. Publicado em: 2015-03
-
10. Comparative study of the characteristics of nano silica - , silica fume - and fly ash - incorporated cement mortars
The structural characteristics of cement mortars, impregnated with nano silica (NS), silica fume (SF) and fly ash (FA), were comparatively studied using Fourier transform infrared spectrometer (FTIR), thermogravimeter-differential thermogravimeter (TG-DTG) and scanning electron microscope (SEM). The mechanical strengths of the specimens were determined at ea
Mat. Res.. Publicado em: 09/05/2014
-
11. Estudo da incorporação de altos teores de argila calcinada no concreto compactado com rolo / Study of the incorporation of high amounts of calcined clay in roller compacted concrete
The rolled compacted concrete (RCC) is a still relatively new technique, but with growing volume of use, a fact generated by its technical and economical advantages, requiring more studies in order to use with greater efficiency, safety and economy. This work deals with the RCC with high levels of replacement and addition of part of the Portland cement by ca
Publicado em: 2010
-
12. Uma avaliação comparativa dos processos MIG/MAG e eletrodo tubular em termos de capacidade produtiva, geração de fumos e de respingos / A Comparative Evaluation of Processes GMAW and FCAW in Terms of Production Capacity, Fume Generation Rate and Spattering
Diante das diferenças operacionais existentes entre, o processo Eletrodo Tubular e o processo MIG/MAG, dois processos de soldagem competitivos em termos de qualidade e produtividade, surge a necessidade de quantificar e salientar as principais características de cada um, visando fornecer ao usuário informações mais seguras que permitam a opção pelo me
Publicado em: 2010