Genetic Algorithm Ga
Mostrando 1-12 de 83 artigos, teses e dissertações.
-
1. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
2. A NEW COMPUTATIONAL FLUID DYNAMICS STUDY OF A LIQUID-LIQUID HYDROCYCLONE IN THE TWO PHASE CASE FOR SEPARATION OF OIL DROPLETS AND WATER
Abstract A liquid-liquid hydrocyclone, so-called de-oiling equipment, was investigated for separation of oil droplets and wastewater in an Iranian petroleum unit. To generate the geometry and the mesh of the hydrocyclone Gambit software was used. Afterwards, by taking advantage of the Euler-Lagrangian principle, the governing equations covering the motion of
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
3. REDUCTION OF SAMPLE SIZE IN THE ANALYSIS OF SPATIAL VARIABILITY OF NONSTATIONARY SOIL CHEMICAL ATTRIBUTES
ABSTRACT In the study of spatial variability of soil attributes, it is essential to define a sampling plan with adequate sample size. This study aimed to evaluate, through simulated data, the influence of parameters of the geostatistical model and sampling configuration on the optimization process, and resize and reduce the sample size of a sampling configur
Eng. Agríc.. Publicado em: 09/09/2019
-
4. Synthesis of New Reconfigurable Limited Size FSS Structures Using an Improved Hybrid Particle Swarm Optimization
Abstract This paper describes a new design methodology for reconfigurable printed circuits with limited size, using an improved hybrid particle swarm optimization (HPSO) algorithm, reducing the search space by the definition of negative zones (NZ), regions where the swarm of particles should not travel. The proposed design methodology (HPSO-NZ) is used in th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
5. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
6. Photoacoustic-based thermal image formation and optimization using an evolutionary genetic algorithm
Abstract Introduction For improved efficiency and security in heat application during hyperthermia, it is important to monitor tissue temperature during treatments. Photoacoustic (PA) pressure wave amplitude has a temperature dependence given by the Gruenesein parameter. Consequently, changes in PA signal amplitude carry information about temperature varia
Res. Biomed. Eng.. Publicado em: 28/05/2018
-
7. Mass and buckling criterion optimization of stiffened carbon/epoxy composite cylinder under external hydrostatic pressure
Abstract In this manuscript, stiffened carbon / epoxy composite cylinders under external hydrostatic pressure will be examined to minimize mass and maximize buckling pressure. The new approach proposed in this paper is single objective optimization of stiffened composite cylindrical shell under external pressure by genetic algorithm (GA) in order to obtain
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
8. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments
Abstract Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
9. Multivariate Calibration to Determine Phorbol Esters in Seeds of Jatropha curcas L. Using Near Infrared and Ultraviolet Spectroscopies
The building of partial least squares (PLS) regression models using near infrared (NIR) and ultraviolet (UV) spectroscopies to estimate the concentrations of phorbol esters (PEs) in Jatropha curcas L. is presented. The models were built using two algorithms for variable selection, ordered predictors selection (OPS) and genetic algorithm (GA). Chromatographic
J. Braz. Chem. Soc.. Publicado em: 2017-08
-
10. Recent Developments in Damage Identification of Structures Using Data Mining
Abstract Civil structures are usually prone to damage during their service life and it leads them to loss their serviceability and safety. Thus, damage assessment can guarantee the integrity of structures. As a result, a structural damage detection approach including two main components, a set of accelerometers to record the response data and a data mining (
Lat. Am. j. solids struct.. Publicado em: 2017
-
11. The study of the ground plane effect on a Multiband PIFA Antenna by using Genetic Algorithm and Particle Swarm Optimization
Abstract The ground plane plays an important role on the performance of a planar inverted-F antenna (PIFA). In this regard, the ground plane modification using slots is proposed in this research to obtain a dual band antenna for WiMAX application. Popular optimization techniques, as genetic algorithm (GA) and particle swarm optimization (PSO), were used to d
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-12
-
12. Numerical Description of Hot Flow Behaviors at Ti-6Al-2Zr-1Mo-1V Alloy By GA-SVR and Relative Applications
Hot compression tests of as-cast Ti-6Al-2Zr-1Mo-1V alloy in a wide temperature range of 1073-1323 K and strain rate range of 0.01-10 s-1 were conducted by a servo-hydraulic and computer-controlled Gleeble-1500 machine. The hot flow behaviors of Ti-6Al-2Zr-1Mo-1V alloy show highly non-linear relationships with strain, strain rate and temperature. In order to
Mat. Res.. Publicado em: 29/09/2016