Gfrp
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Flexural behavior of hybrid GFRP - concrete railway sleepers
Resumo Este trabalho tem por objetivo apresentar o comportamento à flexão de vigas híbridas de GFRP (glass fiber reinforced polymer - polímero reforçado com fibra de vidro) e concreto para aplicação em dormentes ferroviários. Pretendeu-se obter dormentes com adequada resistência mecânica, não susceptíveis à corrosão, duráveis e mais leves que
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
2. Fragmentation model for the tensile response of unidirectional composites based on the critical number of fiber breaks and the correction of the fiber-matrix interfacial strength.
Abstract A fragmentation model based on global load sharing (GLS) theory is developed to obtain stress-strain curves that describe the mechanical behavior of unidirectional composites. The model is named C N B + τ * because it is based on the Critical Number of Breaks model (CNB) and on the correction of the fiber matrix interfacial strength, τ *
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
3. Analysis of methodologies for determination of the economic pipe diameter
RESUMO O dimensionamento de sistemas adutores passa, sobretudo, pela determinação de um diâmetro que atenda às necessidades do sistema e acarrete em menores custos anuais de instalação e operação. Dentre as metodologias existentes para determinação do diâmetro econômico, a Fórmula de Bresse ainda é comum entre projetistas. Este trabalho teve co
RBRH. Publicado em: 08/08/2019
-
4. Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
Resumo Os reforços de compósitos poliméricos com fibras de carbono (CFRP) e de vidro (GFRP) têm sido largamente usados em estruturas de madeira, onde eles podem estar expostos a condições adversas de temperatura. Para serem usados adequadamente, são necessárias informações sobre a sua adesão ao substrato. O objetivo desta pesquisa é avaliar a inf
Ambient. constr.. Publicado em: 10/06/2019
-
5. Fatigue Life and Residual Strength prediction of GFRP Composites: An Experimental and Theoretical approach
Abstract This paper presents the fatigue behavior of Glass Fiber Reinforced Polymer (GFRP) composites at constant amplitude tension-tension loading conditions. A two parameter residual strength and fatigue life model has been proposed by accounting the effect of stress ratio when the structure undergoes continuous loading. A model is also developed to predic
Lat. Am. j. solids struct.. Publicado em: 30/07/2018
-
6. Progressive failure prediction of pinned joint in quasi-isotropic laminates used in pipelines
Abstract To simulate the progressive failure of pinned joint in quasi-isotropic [0/45/-45/90]s glass fiber reinforced polymer (GFRP) composite laminates used in pipeline, 3-D finite element model is employed in the present work. Hashin failure criterion as a progressive damage model associated with Virtual-Crack-Closing-Technique (VCCT) delamination model h
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
7. Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method
Abstract This paper presents the development of a formulation, based on Positional Finite Element Method, to describe the viscoelastic mechanical behavior of space trusses. The numerical method used was chosen due to its efficiency in the applications concerning nonlinear numerical analyses. The formulation describes the positional variation over time under
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
8. Structural Behavior of SFRC Beams strengthened with GFRP Laminates: An Experimental and Analytical Investigation
ABSTRACT This paper presents the experimental results of a reinforced concrete beams (RC) strengthened with internal steel fibers (SF) and external glass fiber reinforced polymer laminates (GFRP). The research work studied the load carrying capacity, deformation, crack width and ductility of the reinforced concrete beams strengthened with different steel fib
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
9. Tensile properties and color and mass variations of GFPR composites under alkaline and ultraviolet exposures
The objective of the present study was to evaluate the influence of two different environmental conditions on the quantitative change of color and mass, tensile strength and modulus of elasticity of glass fiber reinforced polymers (GFRP) produced in Brazil. For this purpose, specimens were taken from pultruded composite profiles with two different matrices (
Matéria (Rio J.). Publicado em: 2016-03
-
10. Mechanical Properties of Glass Fiber Reinforced Polymers Members for Structural Applications
This paper presents the results of an experimental investigation aiming at determining the mechanical properties of Glass Fiber Reinforced Polymer (GFRP) element produced by the Brazilian industry to classify it for structural applications.. The material samples used in this work were (i) prepared in accordance to ABNT-NBR15708:2011 recommendations, (ii) ext
Mat. Res.. Publicado em: 03/11/2015
-
11. An experimental investigation of static load capacity of AL-GFRP adhesively bonded single lap and double butt lap joints
AbstractThis paper is focused on experimental evaluation and comparison of progressive damage behaviors in adhesively bonded single lap and double butt lap joints between aluminum and glass fiber reinforced plastic (GFRP). The effect of joint design and dissimilarity of adherents on damage evolution of adhesive bonding under tensile quasi static loading is a
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
12. Fracture characteristics and anisotropy in notched glass fiber reinforced plastics
The damage mechanism of reinforced plastics may be present in many different ways, since it depends on many factors. Highlights may be given to the effect of stress concentration in of geometric discontinuity in the sections of these structural elements, which in general always leads to certain characteristics of the fracture. In the case of glass fiber rein
Mat. Res.. Publicado em: 2014-12