High Speed Machining
Mostrando 1-12 de 36 artigos, teses e dissertações.
-
1. Study of the AISI 52100 Steel Reuse Through the Powder Metallurgy Route Using High Energy Ball Milling
The AISI 52100 is a tool steel used in industry to produce bearings. After the end of its life cycle, it is remelted or discarded in deposits. The powder metallurgy rises as an alternative to recycle this material without any waste. The steps used to produce the AISI 52100 steel by powder metallurgy included: Machining with speed of 45 rpm, high energy ball
Mat. Res.. Publicado em: 06/11/2017
-
2. Investigation of High-Speed Cryogenic Machining Based on Finite Element Approach
Abstract The simulation of cryogenic machining process because of using a three-dimensional model and high process duration time in the finite element method, have been studied rarely. In this study, to overcome this limitation, a 2.5D finite element model using the commercial finite element software ABAQUS has been developed for the cryogenic machining proc
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
3. Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
Abstract Friction stir spot welding (FSSW) is a process of recent development and interest, mainly in titanium alloys, since there are previous studies of aluminum alloys, magnesium, steel and polymers. Titanium alloys have a wide range of applications in the aeronautical industry, mainly in the components of commercial aircrafts as landing gear. Therefore,
Soldag. insp.. Publicado em: 2016-06
-
4. Analysis of the cutting conditions influence on the finish of hardened steels using high speed milling / Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades
Normalmente, a utilização de aços ferramenta endurecidos, juntamente com as formas complexas típicas das peças utilizadas na área de moldes e matrizes, oferecem dificuldade na usinagem por fresamento, principalmente nas operações de acabamento que exijam o uso de ferramentas longas. A técnica de fresamento HSM (High Speed Machining - usinagem em alt
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/02/2012
-
5. Estudo da influência da força de corte em usinagem a verde nas propriedades mecânicas de cerâmicas sinterizadas / Influence of the cutting force of green machining on the mechanical properties of sintered ceramics
The present study deals with the measurement forces of green machining ceramics and their correlation with the mechanical properties after sintering. The green machining is employed in crude compacts either to check raw formats without compromising the extreme dimensional accuracy or to obtain a preform prior to finish machining after sintering, extensively
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/01/2012
-
6. Influência da topografia superficial na vida da matriz de forjamento a quente / Influence of the surface topography on the life of hot forging die
Vários produtos da indústria metalúrgica mundial são produzidos em regime de produção seriada, que utilizam matrizes em suas operações. Essas matrizes, por sua vez, contêm o perfil negativo do produto e, obviamente, é de interesse econômico que sua vida útil seja a maior possível. Porém, esta vida depende do ambiente ao qual o processo está in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2011
-
7. Estudo teórico da condução de calor e desenvolvimento de um sistema para a avaliação de fluidos de corte em usinagem / Theoretical study of heat conduction and development of a system for evaluation of cutting fluids in machining
Due to the rapid growth and development of machining processes there has been a demand for environmental sustainability and news cutting fluids have been applied. A reliable assessment of their efficiency in cooling the workpiece, tools and improving productivity is still a requirement. The present thesis presents a theoretical study and a proposal of a syst
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2011
-
8. An Investigation into the Use of Industrial Robots for Machining Soft and Low Density Materials with HSM Technique
The needs to comply with an increasingly competitive international market lead industries to some innovative solutions, such as the use of robotic arms as machine tools. Although these solutions present some well known drawbacks, there are some advantages and niches of application where success is possible. The present work investigates the use of such piece
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
9. Análise dos deslocamentos térmicos de eixo-árvores de máquinas-ferramenta em altas rotações / ANALYSIS OF MECHANICAL AND THERMAL DISPLACEMENTS IN HIGH SPEED MACHINE TOOL SPINDLES
Machine tools play a key role in modern industrial production; therefore the technological development of machine tool industry has grown over the past decades. High Speed Machining (HSM) is widely used for machining complex and free form surfaces with high geometrical and dimensional accuracy. The spindle is one of the main items of a machine tool. Thus, it
Publicado em: 2011
-
10. Improvement of the productivity in getting holes in aviation aluminum alloys with high speed tools / Melhoria da produtividade na obtenção de furos em liga de aluminio aeronautico com ferramentas de aço rapido
The purpose of this study is to optimize the manufacturing process of holes made by Company X in one of their products. Besides the optimization, should be maintained the dimensional quality by controlling the diameter, roundness, circularity, and surface finish of cylindrical holes obtained by the widening process, with high-speed steel reamers in a aluminu
Publicado em: 2010
-
11. Performance evaluation of carbide tools on automotive valve guides reaming / Avaliação do desempenho de ferramentas de metal duro no alargamento de guias de válvulas automotivas
Reaming is a machining process with relatively low cost and suitable when high quality holes are required. The purpose of this work is to evaluate the quality of the holes made in automotive valve guides, fabricated with sintered steel. This study was based on parameters of surface roughness, roundness and cylindricity deviations, obtained with uncoated carb
Publicado em: 2009
-
12. Experimental inquiry on chip formation in the machining of ABNT 1045 steel and nodular casting iron / Investigação experimental da formação do cavaco na usinagem do aço ABNT 1045 e do ferro fundido nodular
The chip formation is influenced by several cut parameters which also affect the forces, tensions, powers and temperatures generated during the machining process. Although they have been studied for more than 100 years, still today, the involved mechanisms of deformation are not totally know, due to the fact that the chip formation involves high temperatures
Publicado em: 2008