High Speed Milling
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12
-
2. Study of the AISI 52100 Steel Reuse Through the Powder Metallurgy Route Using High Energy Ball Milling
The AISI 52100 is a tool steel used in industry to produce bearings. After the end of its life cycle, it is remelted or discarded in deposits. The powder metallurgy rises as an alternative to recycle this material without any waste. The steps used to produce the AISI 52100 steel by powder metallurgy included: Machining with speed of 45 rpm, high energy ball
Mat. Res.. Publicado em: 06/11/2017
-
3. Structural and Magnetic Properties of Duplex Stainless steel (UNS S31803) Powders Obtained by high Energy Milling of Chips with Additions of NbC
In this study, the high energy mechanical milling was utilized to the production of duplex stainless steel powders from the recycling chips with and without the addition niobium carbide. The effect of milling time and addition carbide on the morphology, particle size and magnetic properties of the powders was investigated. The utilization of the powder metal
Mat. Res.. Publicado em: 30/10/2017
-
4. Grinding and Milling: Two Efficient Methodologies in the Solvent-Free Phosphomolybdic Acid-Catalyzed and Mechanochemical Synthesis of cis-4-Amido-N-yl-2-methyl-tetrahydroquinolines
The ball-milling process of ABB' Povarov reaction through mechano-chemical activation with phosphomolybdic acid (PMA) as heteropolyacid (HPA) catalyst, was first time explored. The developed high speed vibratory ball milling (HSVBM) green method offers simple and efficient diastereoselective synthesis of cis-2,4-disubstituted tetrahydroquinolines in good to
J. Braz. Chem. Soc.. Publicado em: 2016-12
-
5. Study of Ti-7.5Si-22.5B alloys produced by powder metallurgy
Refractory alloys with silicides and borides have been used in high temperature applications because their elevated melting point, good oxidation resistance and high strength-to-weight ratio. The present study approaches the preparation of Ti-7.5Si-22.5B (at.-%) alloys through high-energy ball milling and sintering. The powders and compacts obtained in these
Mat. Res.. Publicado em: 03/06/2014
-
6. Analysis of the cutting conditions influence on the finish of hardened steels using high speed milling / Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades
Normalmente, a utilização de aços ferramenta endurecidos, juntamente com as formas complexas típicas das peças utilizadas na área de moldes e matrizes, oferecem dificuldade na usinagem por fresamento, principalmente nas operações de acabamento que exijam o uso de ferramentas longas. A técnica de fresamento HSM (High Speed Machining - usinagem em alt
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/02/2012
-
7. On Ti-18Si-6B and Ti-7.5Si-22.5B powder alloys prepared by high-energy ball milling and sintering
Recently, a new ternary phase was discovered in the Ti-Si-B system, located near the Ti6Si2B composition. The present study concerns the preparation of titanium alloys that contain such phase mixed with α-titanium and other intermetallic phases. High-purity powders were initially processed in a planetary ball-mill under argon atmosphere with Ti-18Si-6B and
Mat. Res.. Publicado em: 09/10/2012
-
8. Efeitos da adição de surfactante e moagem de alta velocidade em pós magnéticos à base de Pr-Fe-B obtidos via HDDR / Effects of surfactant addition and high-speed ball milling on magnetic powders based on Pr-Fe-B obtained by HDDR
Esse trabalho teve como objetivo verificar o efeito da adição do ácido oléico na moagem de alta velocidade/energia na obtenção de pós magnéticos em escala nanométricas da liga Pr12Fe65,9Co16B6Nb0,1. A primeira etapa deste trabalho, envolveu a obtenção de pós magnéticos por meio do processo de hidrogenação, desproporção, dessorção e recombi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/10/2011
-
9. Influência da topografia superficial na vida da matriz de forjamento a quente / Influence of the surface topography on the life of hot forging die
Vários produtos da indústria metalúrgica mundial são produzidos em regime de produção seriada, que utilizam matrizes em suas operações. Essas matrizes, por sua vez, contêm o perfil negativo do produto e, obviamente, é de interesse econômico que sua vida útil seja a maior possível. Porém, esta vida depende do ambiente ao qual o processo está in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2011
-
10. Estudo teórico da condução de calor e desenvolvimento de um sistema para a avaliação de fluidos de corte em usinagem / Theoretical study of heat conduction and development of a system for evaluation of cutting fluids in machining
Due to the rapid growth and development of machining processes there has been a demand for environmental sustainability and news cutting fluids have been applied. A reliable assessment of their efficiency in cooling the workpiece, tools and improving productivity is still a requirement. The present thesis presents a theoretical study and a proposal of a syst
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2011
-
11. Influência do ângulo de posição sobre o fresamento frontal de níquel puro com insertos de metal duro
Nickel is considered as a dificult-to-cut material, due to rapidly work hardening when machined. Because it shows high strength at high temperatures it is widely used as high temperature alloys in aerospacial components and more specifically is applied in the continuous casting industry, in molds which consist of a copper sheet with pure nickel electroplated
Publicado em: 2008
-
12. A study of high-energy milling for the production of sintered PrFeB magnets
Sintered Pr16Fe76B8 magnets have been produced using the hydrogen decrepitation (HD) process and high-energy planetary ball milling. Investigations have been carried out to evaluate the influence of the milling speed and time. The best magnetic properties obtained were Br = (1020 ± 20) mT, µ0iHc = (1420 ± 30) mT and (BH)max/= (200 ± 4) kJm-3, for a magne
Materials Research. Publicado em: 2007-09