Hybrid Finite Element
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. FEM-DEM simulation of Uniaxial Compressive Strength (UCS) laboratory tests
Abstract Finite/discrete element methods (FDEM) are hybrid numerical models that use algorithms to analyze the transition from continuous to discontinuous. This type of formulation allows modeling physical laboratory tests with greater proximity to reality. This article proposes to simulate the average behavior of a uniaxial compression test campaign. The te
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
3. An Extended Linear Discontinuous Method for One-group Fixed Source Discrete Ordinates Problems with Isotropic Scattering in Slab Geometry
RESUMO Atualmente, a obtenção de uma solução numérica precisa para problemas de fonte fixa em ordenadas discretas é relevante em muitas áreas da engenharia e das ciências. Neste trabalho, estendemos o método híbrido Elementos Finitos-Espectro Nodal (FEM-SGF), que foi originalmente desenvolvido para resolver problemas de autovalores de difusão, par
TEMA (São Carlos). Publicado em: 30/05/2019
-
4. New hybrid approach for free vibration and stability analyses of axially functionally graded Euler-Bernoulli beams with variable cross-section resting on uniform Winkler-Pasternak foundation
Abstract In this paper, a new hybrid approach is presented based on the combination of the power series expansions and the Rayleigh-Ritz method for stability and free vibration analyses of axially functionally graded non-uniform beams resting on constant Winkler-Pasternak elastic foundation. In the proposed novel technique, the power series approximation is
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
5. Influence of ceramic material, thickness of restoration and cement layer on stress distribution of occlusal veneers
Abstract The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness. A tridimensional model of a human maxillary first molar with an occlusal veneer preparation was constructed using a modeling software of finite element analysis. The model was repli
Braz. oral res.. Publicado em: 29/11/2018
-
6. Fatigue lifespan of a fillet welded joint - Hybrid approach to obtain the S-N curve with a reduced number of tests
Abstract This paper introduces a hybrid approach for obtaining S-N curves with reduced number of tests associated to statistically simulated data. In order to validate the proposal, two validation process were developed. One using a methodology to generate S-N curves based on Monte Carlo simulations and other using actual data according Zhao et al. (1998), a
Lat. Am. j. solids struct.. Publicado em: 18/10/2018
-
7. Finite element modelling to assess the effect of position and size of the piezoelectric layer of a hybrid beam
Abstract A one dimensional finite element model is presented to assess the effect of position and size of the piezoelectric layer of a hybrid beam. The efficient layerwise (zigzag) theory is used for making the finite element model. The 1D beam element has eight mechanical and a variable number of electrical degrees of freedom. The codes are developed in Ma
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
8. Application of Short Fibers Reinforced Composites in Power Transmission Coupling
Abstract In this study the use of short glass, carbon and hybrid glass-carbon fibers reinforced polymeric composites in power transmission coupling is investigated. The presented work is generalized to thermoplastic and thermoset polymeric matrix composites. The effects of the constituents weight percentages, and average fibers length on the composite tensil
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
9. Mechanical and Water Intake Properties of Banana-Carbon Hybrid Fiber Reinforced Polymer Composites
The concern for the environmental pollution and the prevention of resources has attracted researchers to develop new eco-friendly green materials based on sustainability principles. In this experimental study, there are six different composite samples were fabricated by using banana and carbon fibers with epoxy resin matrix. The mechanical properties such as
Mat. Res.. Publicado em: 26/01/2017
-
10. Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model
Abstract The floor pan is an important component that connects the front and rear segments of the automotive underbody structure. Global stiffness and NVH characteristics of BIW are highly dependent to shape, thickness and mass of the body panels and could be evaluated by modal characteristics of these panels. The feeling of solidness and comfort of passenge
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
11. Simulation of Stress Concentration Problems in Laminated Plates by Quasi-Trefftz Finite Element Models
Abstract Hybrid quasi-Trefftz finite elements have been applied with success to the analysis of laminated plates. Two independent fields are approximated by linearly independent, hierarchical polynomials: the stress basis in the domain, adapted from Papkovitch-Neuber solution of Navier equations, and the displacement basis, defined on element surface. The st
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
12. Green's function based finite element formulations for isotropic seepage analysis with free surface
Abstract A solution procedure using the Green's function based finite element method (FEM) is presented for two-dimensional nonlinear steady-state seepage analysis with the presence of free surface in isotropic dams. In the present algorithm, an iteration strategy is designed to convert the over-specified free surface problem to a regular partial differentia
Lat. Am. j. solids struct.. Publicado em: 2015-10