Hybrid Machining
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Analysis of Al2O3-ZrO2 ceramic insert in turning process of Ti-6Al-4V alloy using grey Taguchi-based response surface methodology (GT-RSM)
Abstract The present investigation aimed at a sustainable green turning operation of Ti-6Al-4V alloy using multi-objective optimization of surface roughness, tool flank wear, material removal rate, and tool wear loss with cutting speed, feed rate, and depth of cut as input parameters. The experiments were performed on a CNC lathe machine using an alumina-zir
Cerâmica. Publicado em: 2022
-
2. Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites
This study presents an experimental investigation on surface roughness and chip formation in turning of Al 2219/15SiCp and Al 2219/15SiCp-3Gr (hybrid) composites. Experiments were conducted with different cutting conditions using carbide, coated carbide and polycrystalline diamond (PCD) tools. The results reveal that the surface roughness values are less for
Mat. Res.. Publicado em: 25/06/2013
-
3. Desenvolvimento de um sistema semi-generativo para planejamento de processo auxiliado por computador para ambiente de usinagem / Development of a hybrid computer aided process planning System for a machining enviroment
Este trabalho apresenta o desenvolvimento de um sistema para automatizar o planejamento de processo na fabricação de peças por usinagem, adotando uma metodologia semi-generativa, ou híbrida, que se utiliza de informações de arquivos gráficos padrão STEP. O sistema interpreta o arquivo STEP (protocolo de aplicação AP203) de um sistema CAD qualquer e
Publicado em: 2008
-
4. Performance Evaluation of Hybrid Abrasive Jet Electrical Discharge Machining (AJEDM) / Desenvolvimento e avaliação do processo híbrido de usinagem por descargas elétricas e jato de água abrasivo (AJEDM)
A new technology in non-traditional machining that has been developed is the association of two or more machining process in only one. This worldwide tendency has been observed for more than a decade. For example, the Abrasive Electrical Discharge Grinding (AEDG), which associates the EDM process to grinding, showed good results to Metal Removal Rate (5 time
Publicado em: 2007