Impellers
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. AN INVESTIGATION OF THE HEAT TRANSFER PERFORMANCE OF DUAL IMPROVED INTERMIG IMPELLERS IN A STIRRED TANK WITH AN INNER HEATING COIL
Abstract The heat transfer process in a stirred tank of diameter T=0.5m equipped with dual-layer improved Intermig impellers and helical coils was investigated by experiment and numerical simulation methods. The temperature field, the temperature boundary layer lateral to the coil and the heat transfer coefficient were measured at different rotational speeds
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
2. EFFECT OF DISC-BLADE INTERCEPTING ANGLE ON MIXING PERFORMANCE IN A MULTIPHASE STIRRED VESSEL
Abstract The impeller geometry is a determining factor for mixing efficiency in a stirred vessel. In this study, the effect of disc-blade intercepting angle on power number, just suspended speed and mass transfer coefficient was investigated in a multiphase system under turbulent conditions. The impellers used in this study were fabricated with 3D printing.
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
3. Mixing in shear thinning fluids
In the present study, a CFD characterization of the flow generated by curved-blade impellers in a cylindrical unbaffled vessel was carried out. The tank diameter was 300 mm, with a flat bottom. The liquid height was equal to the vessel diameter. The fluids simulated have a shear thinning behavior. Analyses concern the effect of the impeller speed, the fluid
Brazilian Journal of Chemical Engineering. Publicado em: 2012-06
-
4. Análise da influência de impelidores laterais no tempo de mistura em tanques de estocagem de diesel com o uso da fluidodinâmica computacional / Analysis of the influence of side-entry mixers on the mixing time in diesel storage vessels using computational fluid dynamics
The homogenization process of hydrocarbons in large scale storage tanks equipped with side-entry impellers plays an important role in a refinery operation, since the quality of the final products depends on the performance of this process. Computational Fluid Dynamics (CFD) is the most viable technique to evaluate and to optimize this process, as experimenta
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/11/2011
-
5. Consumo de potência para impelidores rápidos aplicados em processos de agitação e mistura / Power consumption of high shear impellers in processes of agitation and mixture
O projeto de agitadores envolve um grande número de variáveis, além da necessidade de utilização das relações empíricas para que se possa elaborar um projeto eficiente. Em função do grande número de variáveis envolvidas, muitas opções ainda carecem de estudos científicos e bibliografias que deem segurança aos projetistas, como é o caso dos i
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 08/11/2011
-
6. Coarse particle suspension in mechanical flotation cells. / Suspensão de partículas grossas em células mecânicas de flotação.
Several attempts to correlate particle size and flotation response at the biggest Brazilian plants (iron ore and phosphate) have concluded that coarse particles (dp 100m) do not float efficiently. As solids suspension is a necessary precondition for particle collection, the study of coarse particle suspension in mechanical cells is fully justified and it is
Publicado em: 2009
-
7. Performance optimization of impellers of flow hydraulic pumps from classics criteria of design - experimental verifications. / Otimização de desempenho de rotores de bombas hidráulicas de fluxo a partir de critérios clássicos de projeto - verificações experimentais.
Este trabalho tem como objetivo analisar e otimizar o desempenho de uma bomba hidráulica de fluxo através do redimensionamento de seu rotor. A partir da teoria acerca do pré-dimensionamento de rotores pelo método clássico (também conhecido como método geométrico) propõe-se uma planilha eletrônica que permite obter as dimensões básicas necessária
Publicado em: 2008
-
8. Desenvolvimento e otimização de misturador estatico com o uso da fluidinamica computacional (C.F.D.) / Development and optimization of a statistic mixer with the use of computational fluid dynamics (C.F.D.)
On conventional mixing processes, a shaft rotates one or more impellers in a fluid generally inside a process vessel. The mixing processes that use static mixers on tube fluid flow are an option to conventional processes which application and interest is continuously growing, minimizing the use of equipment industrial devices. However its application is rest
Publicado em: 2008
-
9. Effect of the stirring speed, the type of impeller and the feed strategy in a mechanically stirred pilot-scale anaerobic sequencing batch reactor / Estudo da influência da agitação e da estratégia de alimentação sobre o desempenho de um ASBR em escala piloto aplicado ao tratamento de esgoto sanitário
The objective of this work was to assess the effect of the stirring speed, the type of impeller and the feed strategy in a mechanically stirred pilot-scale (da ordem de1 M POT.3) anaerobic sequencing batch reactor to two configurations: a containing granulated biomass (ASBR) and the other containing immobilized biomass (AnSBBR). Domestic wastewater was treat
Publicado em: 2008
-
10. Estudo do fluxo gerado por agitadores tipo ancora
Stirred vessels and mixing systems are the core of the chemical industries, and probably they are the oldest equipment in chemical processing for desired products. Due its great importance to the industry, these processes have been developed through the time, and in the last decades, computational techniques have been used in the project and optimization of
Publicado em: 2002
-
11. Analise critica das correlações e parametros fundamentais em sistemas de agitação
O projeto atual de agitadores químicos é essencialmente dependente de relações empíricas, visto que as leis fisicas que regem os fenômenos envolvidos nos processos químicos são expressões cuja solução analítica é ainda desconhecida. Devido a isto, trabalhos experimentais como os compilados por Nagata, (1975), Oldshue, (1983), Sano e Usui, (1985)
Publicado em: 2002
-
12. Metodologia para determinação de curvas de potencia e fluxos caracteristicos para impelidores axiais, radiais e tangenciais utilizando a fluidodinamica computacional / Methodology for determination of power number curves and characteristics flows for axial, radial and tangential impellers through the use of computational fluid dynamics
Tanques de mistura são muito usados na indústria química, petroquímica, farmacêutica e alimentícia, onde a eficiência das operações de mistura freqüentemente tem um grande impacto no custo de produção e na qualidade do produto. O objetivo deste trabalho é determinar curvas para Número de Potência versus Número de Reynolds, para os impelidores
Publicado em: 2002