Injection Molding
Mostrando 1-12 de 57 artigos, teses e dissertações.
-
1. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
2. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019
-
3. Rheological properties of low-density polyethylene filled with hydrophobic Co(Ni)-Al layered double hydroxides
Abstract Cobalt/aluminum and nickel/aluminum layered double hydroxide (LDH - M+2:Al molar ratio of 3:1) were intercalated with dodecylsulphate (DDS), laurate (LAU), stearate (STE) and palmitate (PAL) and used as filler in low-density polyethylene (LDPE) in percentages between 0.2 and 7.0wt%. After injection molding, the samples were submitted to morphologic
Polímeros. Publicado em: 01/04/2019
-
4. Development of Poly (butylene adipate-co-terephthalate) Filled with Montmorillonite-Polypyrrole for Pressure Sensor Applications
A novel pressure sensing material composed of poly (butylene adipate-co-terephthalate) (PBAT) and montmorillonite-polypyrrole (Mt-PPy) was prepared using melt mixing and injection molding. The structure and properties of the PBAT/Mt-PPy composites were evaluated and compared with those of the PBAT/PPy blends. The PBAT/Mt-PPy displays a very sharp insulator-c
Mat. Res.. Publicado em: 17/01/2019
-
5. Analysis and modeling of simulated residual stress of mold injected plastic parts by using robust correlations
ABSTRACT The injection molding process is the most widely used processing technique for polymers. The analysis of residual stresses generated during this process is crucial for the part quality assessment. The present study evaluates the residual stresses in a tensile strength specimen using the simulation software Moldex3D for two polymers, polypropylene an
Matéria (Rio J.). Publicado em: 02/10/2017
-
6. Effect of Processing Route on the Microstructure and Mechanical Properties of Hot Work Tool Steel
Powder metallurgy is a growing sector in industrial production, as it offers outstanding energy, cost and material savings in comparison with established processing routes such as casting. Hot work toll steels are usually produced by ingot metallurgy, but also by powder metallurgy, namely hot isostatic pressing and powder forging routes. In this paper we inv
Mat. Res.. Publicado em: 21/08/2017
-
7. Development of a Material for Manufacturing a Mold for Plastic Injection
Injection molding is a process used to manufacture high volumes of plastic containers of complex geometric shapes. Although CuBe has always been used, there are currently some alternative alloys such as the CuNiSiCr alloy that has lower manufacturing cost and similar properties. The objective of this paper is to characterize, by techniques of microscopy, the
Mat. Res.. Publicado em: 07/08/2017
-
8. Transverse permeability determination and influence in resin flow through an orthotropic medium in the RTM process
ABSTRACT Resin Transfer Molding (RTM) process is commonly used to produce high quality polymeric composites with simple or complex geometries in small to large sizes. In RTM process a preformed reinforcement is positioned inside the mold cavity. This dry reinforcement is actually a fibrous porous media whereby resin will flow. The mold is then closed and res
Matéria (Rio J.). Publicado em: 20/07/2017
-
9. Thermo-Mechanical Properties of P(HB-HV) Nanocomposites Reinforced by Nanodiamonds
Several studies of biodegradable polymers and copolymers have been carried for different applications in the biomedical area. This current study aims to develop a biocomposite to be used as an orthopedic device, using poly(3-hydroxybutyrate-co-3-hydroxyvalerate) P(HB-HV), a biodegradable copolymer, with 94%HB and 6%HV, as matrix; and nanodiamonds (ND) with p
Mat. Res.. Publicado em: 26/06/2017
-
10. Influência da temperatura de molde associada com o uso de fibra de vidro nas propriedades mecânicas e térmicas do nanocompósito (PA6/FV/MMT)
ABSTRACT This work describes the second of a series of studies of the effects of injection molding conditions on the mechanical and thermal properties of Polyamide 6/Glass Fiber/Montmorillonite (PA6/GF/MMT) composites and was motivated by the lack of information about how the processing variables influence on the properties of three-phase composites containi
Matéria (Rio J.). Publicado em: 11/05/2017
-
11. Influence of sorbitol on mechanical and physico-chemical properties of soy protein-based bioplastics processed by injection molding
Abstract Soy Protein Isolate (SPI) has been evaluated as useful candidate for the development of protein-based bioplastic materials processed by injection molding. The influence of sorbitol (SB) as plasticizer in mechanical properties and water uptake capacity was evaluated in SPI-based bioplastics. A mixing rheometer that allows monitoring torque and temper
Polímeros. Publicado em: 08/12/2016
-
12. Utilization of banana stalk fiber as reinforcement in low density polyethylene composite
ABSTRACT Natural fibers could serve as viable and abundant alternatives to the expensive and non - renewable synthetic fibers as reinforcement in thermoplastic composites. The potentiality of banana stalk fiber at reinforcing a low density polyethylene matrix was examined in this study. Fibers were extracted from the stalk of banana plant and characterized f
Matéria (Rio J.). Publicado em: 2016-12