Inorganic Polymers
Mostrando 1-12 de 52 artigos, teses e dissertações.
-
1. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
2. Mechanical Properties and Abrasive Wear of Different Weight Percentage of TiC Filled Basalt Fabric Reinforced Epoxy Composites
Fiber reinforced polymers are very rarely applied as wear-resistant materials because of the lack of good mechanical strength, which adversely affects the properties of the composites. To improve the mechanical and abrasive wear resistant of the composites, fillers are incorporated into the polymers. Hence in this work composites are produced by adding funct
Mat. Res.. Publicado em: 14/01/2019
-
3. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
4. Anticorrosive Effect of PVP 40000 Against AISI 1020 Carbon Steel in HCl
Polymers have received considerable attention for replacing synthetic inorganic and organic anti-corrosion inhibitors since they are not as toxic for the environment, besides being cheaper. Polyvinylpyrrolidone (PVP) has been studied due to its applicability, solubility, very low toxicity, cost and efficiency in corrosion inhibition against metals, such as z
Mat. Res.. Publicado em: 29/10/2018
-
5. Functionalization of P3HT with Various Mono- and Multidentate Anchor Groups
Due to its favorable optoelectronic properties and the accessibility via Grignard metathesis (GRIM) polymerization, poly(3-hexylthiophene) (P3HT) is one of the most applied conjugated polymers. The ‘living' nature of GRIM polymerization enables the modification of the polymer and the installation of desired properties. In the present study, two versatile a
J. Braz. Chem. Soc.. Publicado em: 2018-05
-
6. Nano-Sized Silver Colloids Produced and Stabilized by Amino-Functionalized Polymers: Polymer Structure-Nanoparticle Features and Polymer Structure-Growth Kinetics Relationships
The synthesis of highly stable silver colloids has been successfully achieved by using reducing/stabilizer amino-functionalized polymers without the aid of any other external agent. The polymer coated inorganic nanoparticles have been detailed characterized via scattering, imaging and UV-Vis spectroscopy. The combination of transmission electron microscopy (
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
7. Synthesis of Submicrometer Calcium Carbonate Particles from Inorganic Salts Using Linear Polymers as Crystallization Modifiers
In this study, we report the synthesis of submicrometer calcium carbonate particles using the simplest approach of mixing solutions of calcium chloride and ammonium carbonate inorganic precursors in the presence of crystallization modifiers. Instead of the typical crystallization of CaCO3 into large calcite crystals with rhombohedral morphology, very small u
J. Braz. Chem. Soc.. Publicado em: 2017-04
-
8. Dispersion degree and zeta potential of hematite
Abstract The dispersion degree of the mineral particles in the pulp is especially relevant regarding the performance of the cationic reverse flotation of iron ores. The gangue minerals should remain dispersed while hematite particles should be selectively flocculated. The present study addressed determinations of dispersion degree and zeta potential of hemat
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
9. Geopolymer/PEG Hybrid Materials Synthesis and Investigation of the Polymer Influence on Microstructure and Mechanical Behavior
Geopolymers are aluminosilicate inorganic polymers, obtained from the alkali activation of powders containing SiO2+Al2O3>80wt%, mainly proposed as environmentally friendly building materials. In this work, metakaolin-based geopolymers have been prepared and a water-soluble polymer, polyethylene glycol (PEG), has been added in different percentages to obtain
Mat. Res.. Publicado em: 25/08/2015
-
10. Rheological and mechanical characterization of poly (methyl methacrylate)/silica (PMMA/SiO2) composites
The search for new materials with properties suitable for specific applications has increased the number of research studies to fill the market demands. The development of polymer composites by the addition of inorganic fillers to the poly(methyl methacrylate) (PMMA) increases the potential use of this polymer in various application fields. The main objectiv
Mat. Res.. Publicado em: 01/08/2014
-
11. Organic-inorganic hybrid membranes in separation processes: a 10-year review
In relation to some inorganic membranes, polymeric membranes have relatively low separation performance. However, the processing flexibility and low cost of polymers still make them highly attractive for many industrial separation applications. Polymer-inorganic hybrid membranes constitute an emerging research field and have been recently developed to improv
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
12. Polímeros impressos com íons: fundamentos, estratégias de preparo e aplicações em química analítica
Chemical imprinting technology has been widely used as a valuable tool in selective recognition of a given target analyte (molecule or metal ion), yielding a notable advance in the development of new analytical protocols. Since their discovery, molecularly imprinted polymers (MIPs) have been extensively studied with excellent reviews published. However, stud
Quím. Nova. Publicado em: 2013