Interface Of Adhesion
Mostrando 1-12 de 134 artigos, teses e dissertações.
-
1. Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate
Abstract The influence of using carbon nanotubes to improve bond strength between textiles reinforced mortar and concrete was investigated. Forty-two specimens were tested using double-shear test to evaluate the effect of various parameters such as CNTs addition, type of textile material, bond length and width, and number of TRM layers on the bond behavior.
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
2. Efeitos do Processo de Refusão a Laser na Microestrutura e No Comportamento de Desgaste do Revestimento de WC Aspergido com HVOF
RESUMO O desgaste de componentes e equipamentos industriais e agrícolas representa um grande fator de depreciação de capital e de fonte de despesas com manutenção e reposição de componentes mecânicos. Como o desgaste é um fenômeno essencialmente superficial, envolvendo a remoção mecânica indesejável de material de superfícies, a solução estu
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. A morte em forma de poesia: comoção, indignação e reivindicação em cordéis midiatizados
Resumo Este artigo reflete parte das análises que vêm sendo desenvolvidas em nossa pesquisa de doutorado, cujo enfoque se constitui a partir da existência de uma dimensão argumentativa em cordéis que fazem interface com a mídia de informação. Em uma argumentação retórica, o raciocínio lógico e a demonstração não são suficientes para garantir
Estud. Lit. Bras. Contemp.. Publicado em: 24/10/2019
-
4. Influence of coupling agents on the adhesion force of dissimilar overmolded polymers: a digital image correlation analysis
ABSTRACT The increase in the technical and functional requirements of plastic items has led the development of multimaterials. To achieve a good performance in the adhesion of dissimilar materials, in this case, polypropylene and coconut fiber composites, it is fundamental to understand the phenomena related to the specific interface. This work aims to evalu
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Investigation of Austenitic Stainless Steel Coatings on Mild Steel Produced by Friction Surfacing Using a Conventional CNC Machining Center
The friction surfacing process allows deposition of similar and dissimilar coatings in the solid state, avoiding some of the problems associated with conventional coating methods in which fusion is involved. In the present work, a viability assessment of producing AISI 304 austenitic stainless steel coatings on AISI 1020 low-carbon steel substrates using a m
Mat. Res.. Publicado em: 21/01/2019
-
6. Esfuerzo de corte en Interfaces Fe/Fe3O4
Abstract The mechanical stability of oxides formed on metallic alloys is a key concern in the determination of component susceptibility to the medium in contact and the applicability of the alloy to high temperatures and other extreme conditions. In this context, the energy of adhesion is a key parameter. Density functional Theory (DFT) and other atomistic m
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Análisis de la forma de onda de señales de Emisión Acústica producida en ensayos de interfaces ceramo-metálicas
ABSTRACT The study of ceramic-metal interface is of special importance in odontology area by the current demand about dental prostheses, so it is very important to be more and more similar to natural teeth and with a long service life. With the aim of assessing in detail the behavior of ceramic-metal interface used in dental restorations systems, in this wor
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Minimization of polymerization shrinkage effects on composite resins by the control of irradiance during the photoactivation process
Abstract High levels of shrinkage stress caused by volumetric variations during the activation process are one of the main problems in the practical application of composite resins. Objective The aim of this study is to reduce the shrinkage stress and minimize the effects caused by composite resin volumetric variation due to the photopolymerization. In thi
J. Appl. Oral Sci.. Publicado em: 18/06/2018
-
9. Replacement of Commercial Silica by Rice Husk Ash in Epoxy Composites: A Comparative Analysis
Since epoxy resins are used as composite matrix with excellent results, and silica is one of the fillers most often employed, this study compared the performance of rice husk ash (RHA) as filler in epoxy composites, in replacement for high-purity silica. Composites were molded containing 20%, 40%, and 60% (wt) silica or RHA. Viscosity analysis, infrared spec
Mat. Res.. Publicado em: 05/04/2018
-
10. An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
ABSTRACT: Carbon fibers (CFs) have been widely applied in the manufacture of polymeric composites. The mechanical properties of these composites depend on the adhesion in the matrix/CF interface. Since the CFs have poor adhesion properties, a surface treatment of the CFs becomes necessary. The plasma process used in this work was the dielectric barrier disch
J. Aerosp. Technol. Manag.. Publicado em: 29/03/2018
-
11. Layer-by-Layer technique employed to construct multitask interfaces in polymer composites
Abstract The properties of glass fiber-reinforced polymer composites are closely related to the fiber-matrix interface. Interfacial treatments to improve mechanical properties are usually limited to enhance interfacial adhesion. In this work, Layer-by-Layer (LbL) technique was introduced to build a novel interface in polymer composites. Different numbers of
Polímeros. Publicado em: 2017-12
-
12. The use of Shearography technique to evaluate polymeric composite repairs - case study
ABSTRACT Pipelines are subject to a variety of defects such as wall thickness loss, grooves, dents and holes. To restore the pipe integrity, polymeric composite repairs can be used. The inspection of repaired pipes is of fundamental importance, not only to verify the initial integrity, but also to monitor their state over time. Shearography is a laser optica
Matéria (Rio J.). Publicado em: 09/10/2017