Internal Friction
Mostrando 1-12 de 47 artigos, teses e dissertações.
-
1. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Comportamento mecânico de solo argiloso estabilizado com resíduo de vidro pulverizado em moinho de alta energia e de bolas
RESUMO A capital do Estado Amazonas apresenta dificuldades na construção de pavimentos devido à predominância superficial de argila em seu perfil geotécnico. Tal material mostra-se inadequado para a construção de subcamadas dessas estruturas urbanas. Avaliou-se, no presente estudo, o comportamento mecânico do solo argiloso típico de Manaus-AM na sua
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. The Effect of Roots on the Shear Strength of Texturally Distinct Soils
ABSTRACT The aim of this work was to evaluate the roots influence on the shear strength of a clay soil and a sandy soil. Soil samples with and without roots were collected from experimental plantations of Atlantic Forest native species. The soil samples were then physically characterized and their shear strength tested in a laboratory. The results indicated
Floresta Ambient.. Publicado em: 30/05/2019
-
4. Head loss in laser-perforated thin-walled polyethylene pipes for irrigation
RESUMO Para reduzir custos fixos e operacionais em sistemas de irrigação pressurizados são produzidos tubos de polietileno com pequena espessura de parede, com orifícios de descarga perfurados a laser, que operam a baixas pressões (até 100 kPa). A caracterização hidráulica desses materiais é essencial para o dimensionamento dos sistemas de irrigaç
Rev. bras. eng. agríc. ambient.. Publicado em: 06/05/2019
-
5. Microstructure and flow properties of lyophilized mango pulp with maltodextrin
RESUMO Objetivou-se com o trabalho determinar as propriedades e o comportamento do escoamento do pó da polpa de manga liofilizada em função de diferentes concentrações de maltodextrina. Nas amostras dos pós contendo 5, 10 e 15% de maltodextrina foram determinados o efetivo ângulo de atrito interno, ângulo de atrito com a parede, índice de fluxo e de
Rev. bras. eng. agríc. ambient.. Publicado em: 2019-02
-
6. The Contribution of Mechanical Spectroscopy to Understanding Grain Boundary Sliding
This review paper shows that grain boundary sliding (GBS) is a general phenomenon occurring in all classes of inorganic materials: ceramics, metals and composite materials. The occurrence of relaxations attributed to GBS is also quite general and therefore the mechanical spectroscopy constitutes a sensitive and universal technique to study such phenomenon. G
Mat. Res.. Publicado em: 25/10/2018
-
7. Study of friction stir spot welding on AA6063 aluminium alloy used in the ship building industry
ABSTRACT Friction stir spot welding (FSSW) is a novel process of metal joining. In the present work, the authors analysed the possibility of using this process to solve current problems in shipbuilding industry regarding small vessels by replacing the current arc welding techniques with the aforementioned process. Numerical simulation was carried out by the
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
9. Annealing and Extended Etching Improve a Torsional Resonator for Thin Film Internal Friction Measurements
We evaluate two methods to improve the background internal friction of the Double Paddle Oscillator (DPO), which has a nominal low temperature value of Q-1 ≈ 2×10-8. We find that annealing the DPO in vacuum at 300°C for 3 hours systematically reduced Q-1 at all temperatures and revealed a 100K internal friction peak by permanently removing it. We also fi
Mat. Res.. Publicado em: 18/06/2018
-
10. Manipulation of Glassy State in Amorphous Selenium by Low-temperature Internal Friction Measurements
We have studied the thickness and quench-rate dependent internal friction of amorphous selenium (a-Se) thin films deposited at room temperature. The internal friction of a-Se films exhibit a temperature independent plateau below 1 K followed by a broad maximum at 10 K. The plateau, which is seen in almost all amorphous solids, is caused by dissipation by two
Mat. Res.. Publicado em: 07/06/2018
-
11. Amplitude-Dependent Internal Friction Study of Fatigue Deterioration in Carbon Fiber Reinforced Plastic Laminates
The amplitude-dependent internal friction in carbon fiber reinforced plastic (CFRP) laminates subjected to fatigue cycling has been measured and analyzed to convert into the plastic strain of the order of 10-8 as a function of effective stress. The microplastic flow indeed occurs in the stress range three orders of magnitude lower than the failure stress, an
Mat. Res.. Publicado em: 07/06/2018
-
12. Low-Temperature Anelastic Property of Nanocrystalline Ag Fabricated by Gas Deposition Method
It was reported that the internal friction (Q-1) of nanocrystalline (n-) Au and n-Cu showed a rapid increase linearly with temperature above ~200 K. Since the rapid increase in Q-1 decreased with the progress in the grain growth, it was suggested that the anelasticity of grain boundaries in n-Au and n-Cu was thermally activated above ~200 K. In order to purs
Mat. Res.. Publicado em: 04/06/2018