Iron Formation
Mostrando 1-12 de 579 artigos, teses e dissertações.
-
1. Selective formation of neodymium phosphate from iron-neodymium magnet waste
Abstract Neodymium-iron-boron alloy, Nd2Fe14B, is used as a material for magnets. Neodymium is one of the valuable and expensive rare earth elements and is often recovered to reduce costs and environmental impact. Recently, a method for recovering neodymium as neodymium phosphate from mixed solutions was reported. This method was very useful because the main
Cerâmica. Publicado em: 2022
-
2. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
4. Polyacrylamides in reverse cationic iron ore flotation: bench scale study
Abstract A bench scale study was carried out to investigate the influence of polyacrylamides as co-depressant in a blend with starch depressant on the reverse cationic iron ore flotation. The results indicated that the use of polyacrylamides as dual function polymer should be an alternative to improve the flotation process. These polymers act as a depressant
REM, Int. Eng. J.. Publicado em: 2021-09
-
5. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
6. REMEDIACIÓN ELECTROCINÉTICA DE UN SUELO REAL CONTAMINADO CON PLOMO ASISTIDA CON LA ADICIÓN DE UN AGENTE COMPLEJANTE
The use of ethylenediaminetetraacetic acid disodium salt (Na2EDTA) as a chelating agent presents ideal characteristics to be used for the removal of lead from a contaminated site. Batch experiments together with a simple local equilibrium model were carried out to evaluate the role of EDTA as enhancing agent in electrokinetic remediation of a Pb-contaminated
Quím. Nova. Publicado em: 2020-09
-
7. Analysis of cracks and coating in iron ore pellets by digital image processing
Abstract The pelletizing process agglomerates ore fines previously considered as tailings and makes its application possible in the form of pellets. During the process, the pellets are subjected to various compressive forces and temperature changes, which cause ruptures in their surface. These ruptures (cracks) impair the performance of the pellets in the re
REM, Int. Eng. J.. Publicado em: 2020-09
-
8. APRESENTAÇÃO - História Antiga: Diferentes Perspectivas
Biodiesel is a suitable alternative to replace the petro-diesel. The biodiesel is formed by unsaturated esters easily degraded by interferences of oxygen, temperature, contact with metals or contaminants. The aim of this research was to investigate the biodiesel degradation process via 1H nuclear magnetic resonance (NMR) spectroscopy, observing the olefinic,
Rev. Bras. Hist.. Publicado em: 2020-08
-
9. Evaluation of the Oxidation Degradation Process of Biodiesel via 1H NMR Spectroscopy
Biodiesel is a suitable alternative to replace the petro-diesel. The biodiesel is formed by unsaturated esters easily degraded by interferences of oxygen, temperature, contact with metals or contaminants. The aim of this research was to investigate the biodiesel degradation process via 1H nuclear magnetic resonance (NMR) spectroscopy, observing the olefinic,
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
10. The Tatuí Formation as a source of raw material in the ceramic pole of Santa Gertrudes (SP)
Abstract The importance of the Santa Gertrudes Ceramic Complex (SGCC) in the ceramic market is directly associated with the high quality of the Corumbataí Formation clays used in the manufacture of its products. Although the volumetric capacity of the Corumbataí Formation is able to meet the SGCC demand for the coming years, its industries are always in se
REM, Int. Eng. J.. Publicado em: 2020-03
-
11. Photocatalytic degradation of ferricyanide as synthetic gold mining wastewater using TiO2 assisted by H2O2
Abstract Ferricyanide Fe(CN) 6 3- is one of the most stable cyanometallic complexes present in the gold mining effluents. This cyanocomplex is hard to degrade by natural attenuation and generates a negative impact on aquatic environments. Although free cyanide (CN-) can be obtained by acidifying the solution, the CN- is lethal for all forms of life. The oxid
REM, Int. Eng. J.. Publicado em: 2020-03
-
12. Síntese de pigmentos de níquel utilizando areia descartada de fundição como fonte de sílica
Resumo Sintetizaram-se pigmentos do sistema Zn2-xNixSiO4 variando a proporção molar de zinco e níquel, partindo da estrutura willemita (Zn2SiO4) à olivina (Ni2SiO4), usando areia descartada de fundição (ADF) e sílica comercial como fontes de SiO2. A ADF foi caracterizada por análise química e DRX. A síntese dos pigmentos seguiu rota cerâmica, com
Cerâmica. Publicado em: 14/11/2019