Journal Bearings
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Uncertainty analysis of a flexible rotor supported by fluid film bearings
AbstractThis paper is dedicated to the analyses of the effect of uncertain parameters on the dynamic behavior of a flexible rotor containing two rigid discs and supported by two fluid film bearings. A stochastic method has been extensively used to model uncertain parameters, i.e., the so-called Monte Carlo simulation. However, in the present contribution, th
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
2. Desenvolvimento de um modelo termohidrodinâmico para análise em mancais segmentados / Development of a thermohydrodynamic model for analysis in tilting pad journal bearings
Este trabalho tem por objetivo analisar o comportamento termohidrodinâmico de mancais hidrodinâmicos segmentados e avaliar a influência da temperatura nas características dinâmicas (coeficiente equivalente de rigidez e de amortecimento) desses mancais. Por esse motivo, foi desenvolvido um modelo termohidrodinâmico para análise em mancais segmentados,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/07/2012
-
3. Avaliação de mancais hidrodinâmicos com descontinuidades geométricas / Evaluation of hydrodynamic bearings with geometric discontinuities
Hydrodynamic bearings are widely used in rotating machines, being the element responsible for the interaction between the rotor and the supporting structure. Therefore, in order to describe the dynamic behavior of the rotating shafts, it is necessary to know the journal bearings characteristics. For this reason, the purpose of this work is to analyze the dyn
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/02/2011
-
4. Modelling hermetic compressors using different constraint equations to accommodate multibody dynamics and hydrodynamic lubrication
In this work, the steps involved for the modelling of a reciprocating linear compressor are described in detail. The dynamics of the mechanical components are described with the help of multibody dynamics (rigid components) and finite elements method (flexible components). Some of the mechanical elements are supported by fluid film bearings, where the hydrod
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-03
-
5. Dynamic model of axis-crank-shaft-piston from reciprocating compressor with hydrodynamic journal bearing / Dinamica de sistema rotor-biela-pistão de compressores alternativos com mancais radiais hidrodinamicos
O objetivo do presente trabalho é a modelagem dinâmica e a simulação das cargas e dos deslocamentos correntes nos mancais de um compressor alternativo. O modelo de mancal, integrado à cinética do conjunto, permite avaliar de forma precisa a influência dos pequenos movimentos dos suportes hidrodinâmicos no comportamento global do compressor. Soluçõe
Publicado em: 2009
-
6. Analise numerica de mancais hidrodinamicos lisos e ranhurados utilizando o metodo dos volumes finitos / Numerical analysis of smooth and grooved journal bearings using the finite volume method
Desde os primeiros estudos numéricos sobre lubrificação em mancais hidrodinâmicos até a atualidade, existiram relativamente poucos trabalhos abordando o problema através do método dos volumes finitos. Na verdade, a maioria dos estudos, na área de lubrificação, utiliza a equação de Reynolds e o método das diferenças finitas para estabelecer o ca
Publicado em: 2009
-
7. Determinação de características de desempenho de mancais radiais elípticos utilizando o método de elementos finitos
This work presents the determination of the performance characteristics of hydrodynamic oil lubricated journal bearings of fixed geometry, with elliptical profile using the finite element method. A finite element procedure based on the Galerkin weighted residual method is developed from the classical Reynolds Equation for incompressible fluids. A linearized
Publicado em: 2007
-
8. Rotor-structure interaction : theoretical-experimental model / Interação roto-estrutura : modelo teorico-experimetal
This work investigates the effects of the support structure and the hydrodynamic bearings on the dynamic behaviour of rotating machinery. The support structure, also known as foundation, was analysed experimentally and its modal parameters determined through the modal analysis of its frequency response functions (FRF). These parameters were refined through t
Publicado em: 2007
-
9. Hydrodynamic journal bearing analysis under fluid-induced instabilities / Analise de mancais hidrodinamicos em rotores sob instabilidade fluido-induzida
In this investigation, the analysis and validation of rotative system supported by hydrodynamic journal bearings was accomplished. A non-linear hydrodynamic bearing model was considered. The rotary shaft and rotor mass were modeled by The Finite Element Method. The combination of these models is able to simulate the system response to the auto-excitation cau
Publicado em: 2007
-
10. Análise por elementos finitos da influência de descontinuidades geométricas sobre o comportamento dinâmico de rotores flexíveis.
This work deals with a finite element analysis of the dynamic behavior of cracked flexible rotors supported by hydrodynamic journal bearing. Geometric discontinuities such as cracks, holes, undercuts, etc. can strongly affect the vibrational response of rotating systems due to the rotor local flexibility changes. The rotor model is based on the Timoshenko be
Publicado em: 2007
-
11. Lateral dynamics and stability analysis of a gas compressor supported by hybrid and active lubricated multirecess journal bearing
Fluid film forces are generated in multirecess journal bearings by two types of lubrication mechanism: the hydrostatic lubrication in the bearing recesses and hydrodynamic lubrication in the bearing lands, when operating in rotation. The combination of both lubrication mechanism leads to hybrid journal bearings (HJB). When part of hydrostatic pressure is als
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-12
-
12. Operating characteristics of heavy loaded cylindrical journal bearing with variable axial profile
During the operation of turbounit its bearings displace as a result of heat elongation of bearings supports. It changes the static deflection line of rotor determined during assembly of the turbounit, causing an increase in the stresses on the bearing edges and a decrease in the dynamic state of the machine. One of possibilities to avoid the edge stresses is
Materials Research. Publicado em: 2005-12