Laminated
Mostrando 1-12 de 215 artigos, teses e dissertações.
-
1. Production and characterization of artificial stone for coating with limestone waste laminated in polymeric matrix
Resumo A exploração do calcário laminado do Cariri Ceará para fins ornamentais e de revestimento gerou cerca de 2,9 milhões de toneladas de resíduos, que são descartados de forma inadequada, tornando importante a busca por alternativas a este material. Assim, este trabalho teve como objetivo desenvolver uma pedra artificial para revestimento de parede
Ambiente Construído. Publicado em: 2022
-
2. Avaliação de propriedades mecânicas da madeira de Pinustaeda provenientes de placas de cross laminated timber
Resumo As placas de madeira lamelada colada cruzada (em inglês, cross laminated timber [CLT]) vêm sendo utilizadas na construção civil devido a seu elevado desempenho arquitetônico e estrutural e por questões de sustentabilidade. Por ser um produto compósito ortotrópico, o conhecimento das características mecânicas de sua matéria prima nas direç�
Ambient. constr.. Publicado em: 2021-10
-
3. ENVIRONMENTAL THERMAL COMFORT OF A REDUCED MODEL USING CROSS-LAMINATED TIMBER
ABSTRACT The challenges for the use of the cross-laminated timber (CLT) system in the Brazilian agricultural market are significant. This study evaluated the thermal performance of fiber cement tiles associated with a CLT non-conventional structure compared to those of ceramic, fiber cement and aluminum roof tiles based on following thermal comfort indexes (
Eng. Agríc.. Publicado em: 2020-08
-
4. CONSTRUCTION AND TESTING OF GLUED LAMINATED TIMBER FRAMES FOR USE IN LAYING POULTRY HOUSES
ABSTRACT This study aimed to present a solution in glued laminated timber to replace frame structures built in reinforced concrete and metallic structure, which are common in agricultural buildings in western Paraná such as those destined to laying poultry house building by agricultural cooperatives. Structural behavior of frames build from Araucaria angust
Eng. Agríc.. Publicado em: 2020-04
-
5. STUDYING THE GRAMMAGE IN LVL PANELS GLUED WITH CASTOR OIL-BASED POLYURETHANE ADHESIVE: A POSSIBLE ALTERNATIVE TO FORMALDEHYDE RELEASING ADHESIVES.
ABSTRACT Efforts have been done in order to decrease the human dependence on petroleum materials. This idea can be applied for wood adhesives and wood products. This study proposes to evaluate laminated veneer lumber (LVL) panels of Hevea brasiliensis produced with castor oil-based polyurethane and resorcinol formaldehyde in different grammages. Six rubber t
CERNE. Publicado em: 2020-03
-
6. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
7. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
8. INVENTÁRIO DO SAPATEIRO DAMIÃO SIMÕES: UM ESTUDO FÍSICO-QUÍMICO DO DOCUMENTO MAIS ANTIGO DO ESTADO DE SÃO PAULO
The oldest manuscript from the Arquivo Público do Estado de São Paulo dating back to the XVI century, which was laminated some decades ago, was analyzed by Raman and FTIR spectroscopies. A book from the XVIII century and Japanese papers were also investigated for comparison purpose. Raman microscopy is a well-known technique, which offers a non-destructive
Quím. Nova. Publicado em: 05/12/2019
-
9. Fat grafting associated with negative pressure wound therapy
Abstract Purpose: To describe a case report of FG associated with NPWT in the treatment of complex wound on the distal third of the lower limb with bone exposure. Case Report: A 59-year-old patient with chronic left tibial osteomyelitis since childhood underwent extensive debridement of the distal tibial diaphysis (40% of bone thickness per 10 cm extension
Acta Cir. Bras.. Publicado em: 28/11/2019
-
10. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Large deflection and initial instability analysis of anisotropic plates by the generalized finite element method
Abstract This paper presents investigations laminated plates under moderately large transverse displacements and initial instability, through the Generalized Finite Element Methods - GFEM. The von Kármán plate hypothesis are used along with Kirchhoff and Reissner-Mindlin kinematic plate bending models to approximate transverse displacements and critical bu
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
12. Digital smile designing, pressing and stratifying ceramic lithium disilicate veneers to rehabilitate dental agenesis: a clinical report
RESUMO Este é um relato de caso de reabilitação estética anterior com facetas laminadas dos elementos 14 ao 24 confeccionadas com a cerâmica IPSE.max Ceram (Ivoclar -Vivadent), as quais substituíram facetas de resina composta insatisfatórias dos elementos 13 ao 23. Ressalta-se que o paciente possuía agenesia dos elementos 12 e 22, tornando-se necess�
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019