Large Eddy Simulation
Mostrando 1-12 de 35 artigos, teses e dissertações.
-
1. LARGE EDDY SIMULATION COMBINED WITH EQUIVALENT DIAMETER FOR TURBULENT JET MODELLING AND GAS DISPERSION
Abstract CFD modelling combines transport phenomena and numerical approaches to solve physical problems. Although numerical modelling of flow scenarios is the cutting edge of flow modelling, there seems to be room for improvement. This paper proposes an approach for jet modelling in a low Mach number computational code. The methodology is based on the equiva
Braz. J. Chem. Eng.. Publicado em: 2016-09
-
2. Large Eddy Simulation of Bluff Body Stabilized Turbulent Premixed Flame
ABSTRACT: A turbulent reacting flow in a channel with an obstacle was simulated computationally with large eddy simulation turbulence modeling and the Xi turbulent combustion model for premixed flame. The numerical model was implemented in the open source software OpenFoam. Both inert flow and reactive flow simulations were performed. In the inert flow, comp
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
3. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
4. Simulação computacional de escoamentos reativos com baixo número Mach aplicando técnicas de refinamento adaptativo de malhas / Computational simulation of low Mach number reacting flows applying adaptive mesh refinement techniques.
It is the main goal of the present work to extend a numerical methodology based on both the use of an adaptive mesh refinement technique (AMR) and the use of a multistep, implicit-explicit time-step strategy (IMEX) to applications involving low Mach number reactive flows. Originally developed for incompressible flows, the Eulerian formulation of that methodo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/06/2012
-
5. Simulação de grandes escalas para análise numérica da esteira aerodinâmica da turbina eólica NREL UAE Phase VI
The Unsteady Aerodynamics Experiment Phase VI, which has been carried out in 2000 by the US National Renewable Energy Laboratory (NREL) at the NASA Ames wind tunnel, has been numerically reproduced. The purpose of this work is to study the characteristics of the wind wake produced by the 10 meter two bladed wind turbine, operating at a constant rotational sp
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
6. Otimização e dinâmica dos fluidos computacional aplicadas a turbinas eólicas
The present work consists in the application of optimization methods and computational fluid dynamics to wind turbines. The massive growth in renewable energies demands more powerful turbines and more accuracy in their design and analysis. This work has three objectives: optimization of an airfoil for wind turbines, simulation of a wind turbine airfoil in de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
7. PARAMETRIZAÇÃO DO TRANSPORTE DE ENERGIA CINÉTICA TURBULENTA NA CAMADA LIMITE CONVECTIVA / PARAMETERIZATION FOR THE TURBULENT KINETIC ENERGY TRANSPORT IN THE CONVECTIVE BOUNDARY LAYER
Neste trabalho, uma parametrização para os termos de transporte da equação de balanço de energia cinética turbulenta (ECT), válida para uma camada limite convectiva (CLC), é apresentada. Esta é uma tarefa complicada de ser realizada a partir de dados experimentais, especialmente devido a dificuldade associada às medidas das flutuações de pressão
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2011
-
8. Solução via LES de chamas difusivas de metano, metanol e etanol
This work presents a model for a jet diffusion flame, for low Mach and high Damköhler numbers. The model is based on the solution of the flamelet equations for the chemistry and on the mixture fraction for the flow. This model describes well the behavior of diffusion flames, except at the flame tip, where instabilities can often occur. Numerical results are
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
9. Turbulent natural convection in enclosures using large-eddy simulation with localized heating from horizontal bottom surface and cooling from vertical surfaces
Turbulent natural convection of air that happens into inner square cavity with localized heating from horizontal bottom surface has been numerically investigated. Localized heating is simulated by a centrally located heat source on the bottom wall, and two values of the dimensionless heat source length ? are considered in the present work. Solutions are obta
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-09
-
10. Efeitos de modelos submalha em escoamentos em ciclones
A Large-Eddy Simulation (LES) of a single-phase turbulent flow in flat bottom model cyclone geometry was performed. The chosen fluid has the physical properties of air, and the particulate phase was not considered in this work, so the underflow duct was not considered idem, which means that the simulated cyclone has only one output (the overflow duct). The c
Publicado em: 2009
-
11. Modelagem de uma chama de difusão turbulenta pela simulação de grandes escalas. / Modeling of a turbulent diffusion flame with the method of large eddy simulation.
The mean goal of this work was to better understand the dynamics of turbulent diffusion flames. The turbulent flow was resolved appling the methodology of Large Eddy Simulation, coupled with the Flamesheet model for reactive systems. The effects of the turbulent subgrid dissipation were accounted with the Smagorinsky (1963) subgrid model. The numerical code
Publicado em: 2009
-
12. Análise numérica na Engenharia do Vento Computacional empregando computação de alto desempenho e simulação de grandes escalas / Numerical analysis in the computational wind engineering employng high-performance programming and large eddy simulation
O presente trabalho tem como objetivo o desenvolvimento de um sistema voltado à solução de problemas relacionados à Engenharia do Vento Computacional. Para o tratamento das estruturas turbulentas, a Simulação das Grandes Escalas é empregada. Esta metodologia resolve diretamente as estruturas que governam a dinâmica local do escoamento (grandes escala
Publicado em: 2009