Leaching Acid
Mostrando 1-12 de 110 artigos, teses e dissertações.
-
1. Processamento de catalisadores gastos de unidade de hidrodessulfurização profunda (ultra-deep HDS)
PROCESSING OF SPENT ULTRA-DEEP HYDRODESULFURIZATION CATALYSTS. This work discusses the recycling of spent NiMo/Al2O3 catalysts from ultra-deep hydrodesulfurization (HDS) units. They contain a refractory coke and fouling elements from the processed feedstocks. Samples were preoxidized (600 ºC) for 12 h using a very slow heating rate to eliminate coke and vol
Química Nova. Publicado em: 2022
-
2. Acid matrix production from treated natural vermiculite-hydrobiotite
Abstract Given the potential of acid-activated clays in adsorptive and catalytic processes, several studies focusing on acid matrices have grown over the years, making it possible to study vermiculite, a mineral composed of a type 2:1 unit cell with tetrahedral and octahedral sheets. Therefore, this work aimed to study vermiculite treated with acids for the
Cerâmica. Publicado em: 2021-06
-
3. Brazilian Mineral Clays: Classification, Acid Activation and Application as Catalysts for Methyl Esterification Reactions
In this study, three raw Brazilian clays from João Pessoa, Paraíba State (Aço AP, AVL and Verde Lodo) were characterized before and after purification and acid activation. Several instrumental techniques were used, and the raw clays were classified as dioctahedral smectites with different compositions, where the AVL sample had the highest content of montm
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
4. Forecasting mass and metallurgical balance at a gold processing plant using modern multivariate statistics
Abstract Knowing the quantity and the quality of products and tailings generated by a beneficiation plant, even before ore processing, can make the mining operations more sustainable, more profitable, and safer. To forecast these values, it is necessary to submit samples to batch tests which mimic the processing workflow used on an industrial scale. Then, th
REM, Int. Eng. J.. Publicado em: 2020-12
-
5. PROCESSING OF A METAL CONCENTRATE FROM GROUND WASTE PRINTED CIRCUIT BOARDS IN ACIDIC MEDIA USING HYDROGEN PEROXIDE AS OXIDANT
The recovery of precious and base metals of a metal concentrate from ground waste printed circuit boards (PCBs) is described in detail. Samples were treated with NaOHaq. to remove the soldering mask. Experiments were performed in acidic medium (HF, H2SO4, CH3COOH or H3PO4) using H2O2 as oxidant. Base metals were leached in high yields (>99 wt.%) at ~40 ºC a
Quím. Nova. Publicado em: 20/07/2020
-
6. Minieditorial: Risco de FA após Ablação de Flutter Dependente de Istmo Cavo-Tricuspídeo: Vale a Pena Fazer a Ablação da FA Simultaneamente?
Considering the size of the Amazon region and the need for studies to establish soil trace metal concentrations in natural environments, the objective of this work was to evaluate heavy metal contents in a toposequence of an Amazon State microbasin. Soil samples were collected in three native forest topographic positions. Samples were opened for analysis by
Arq. Bras. Cardiol.. Publicado em: 2020-05
-
7. VALORES DE REFERÊNCIA DA CONCENTRAÇÃO DE METAIS PESADOS EM SOLOS NA AMAZÔNIA CENTRAL
Considering the size of the Amazon region and the need for studies to establish soil trace metal concentrations in natural environments, the objective of this work was to evaluate heavy metal contents in a toposequence of an Amazon State microbasin. Soil samples were collected in three native forest topographic positions. Samples were opened for analysis by
Quím. Nova. Publicado em: 2020-05
-
8. Residue-Based CaO Heterogeneous Catalysts from Crab and Mollusk Shells for FAME Production Via Transesterification
The production of fatty acid methyl esther (FAME) via transesterification was studied, assessing the influence of CaO heterogeneous catalysts obtained from four different fishery residues: sururu, crab, clam and mussel. Characterization and properties of the residues were obtained via thermogravimetric analysis, X-ray diffraction, X-ray fluorescence, Fourier
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
9. RE-ESTERIFICATION OF MACAUBA ACID OIL USING GLYCEROL FOR ACIDITY REDUCTION AND BIODIESEL PRODUCTION
Abstract Biodiesel production using acid oils is an important alternative for biofuel cost reduction. However, it is a huge challenge for homogeneous transesterification, the main industrial route commonly used. This paper presents macauba oil with high acidity, 43.90 w/w%, as a potential raw material for biodiesel production. The acidity was reduced to 0.8
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
10. Long-term behavior of mortars produced with sulfide-bearing aggregates
ABSTRACT The variety of sulfides (inorganic compounds formed by combining sulfur with a metal element) presented in earth crust is not small, which makes it difficult to avoid the use of sulfide-bearing aggregates in the concrete, especially in places where another source of material is non-existent or economically impracticable, as is the case of dams. With
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Degradation of Acid Red 8 Dye Using Photo-Fenton Reaction Mediated by Titanium Modified Catalysts
Catalysts prepared by co-precipitation of iron and titanium were evaluated in heterogeneous photo-Fenton degradation of the azo dye Acid Red 8 under blacklight irradiation. Materials with different titanium contents (0 < Ti/Fe < 0.6) were characterized using X-ray diffractometry, scanning electron microscopy, X-ray fluorescence spectroscopy, specific surface
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
12. Acid Leaching-Based Synthesis of CdS Yellow Ceramic Pigment with Discarded Ni-Cd Batteries
There is increasing interest in the ceramic industry in the development of pigments with intense tonalities that can be produced from low-cost alternative raw materials and also can fulfill technological and environmental requirements. This work reports on the preparation and characterization of CdS yellow ceramic pigment derived from Ni-Cd batteries through
Mat. Res.. Publicado em: 14/10/2019