Lead Acid Batteries
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Influência da adição de Sn na resistência à corrosão e na capacidade de recarga da liga Pb-1,5%Sn para grade positiva de baterias chumbo-ácido
RESUMO O presente trabalho teve como objetivo avaliar o processo de corrosão do Pb e da liga Pb-1,5%Sn quando submetidos à condição de ciclagem em meio de ácido sulfúrico, visando compreender a influência da adição de Sn na resistência à corrosão e na capacidade de recarga para grades positivas de baterias do Pb-ácido. As amostras de estudo fora
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. SEM study of a lead-iron slag flotation process
Abstract Companies producing lead-acid batteries are required by law to recycle their battery scrap. The recycling can be performed by a pyrometallurgical process resulting in slags containing mainly lead and iron. A study was carried out with the aim of recovering the lead contained in this slag. This work has economic and environmental implications. Slag c
REM, Int. Eng. J.. Publicado em: 2018-07
-
3. Velocidad de corrosión de una aleación base plomo en una solución de ácido sulfúrico a diferentes temperaturas
Car batteries are not only affected by their use and wear but also by other factors such as electrolyte concentration, water loss and temperature that can be exposed, the latter being the most influential factor causing an increase in the corrosion rate of lead alloys (battery components), and affecting their service time. Therefore, for the industry of auto
Matéria (Rio J.). Publicado em: 2014-06
-
4. Caracterização das escórias provenientes da reciclagem de baterias de chumbo-ácido
No Brasil, a principal fonte de chumbo metalico e obtido a partir da reciclagem de baterias de chumbo-acido pelo processo pirometalurgico. O processo consiste na separacao dos componentes da bateria de chumbo-acido e posterior fusao dos metais no forno de reducao do tipo rotatorio. Esta e uma alternativa economica, sustentavel e ecologicamente correta mas, a
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/02/2011
-
5. Eletrodos positivos tubulares para baterias chumbo ácidas produzidas com material ativo nanométrico
Conventional stationary lead acid batteries positive tubular plates have a specific capacity of about 120 Ah/kg. This value represents an active material utilization coefficient of 50%. The production of these plates includes some initial processes to generate the active PbO2 from a precursor material. In the present work it will be presented a proper and no
Química Nova. Publicado em: 2011
-
6. Solidification microstructures and mechanical and corrosion resistances of dilute Pb-Sn alloys / Microestrutura de solidificação e resistencias mecanicas e a corrosão de ligas Pb-Sn diluidas
Lead-acid batteries manufacturers have modified the manufacturing processes and the chemical composition of alloys used in battery grids in order to decrease their weight as well as to reduce the production costs, and to increase the battery life-time cycle and the corrosion-resistance. The morphological microstructures characterized by cellular and dendriti
Publicado em: 2009
-
7. Reciclagem de pilhas: recuperação do manganês na forma do dióxido de manganês eletrolítico. / Recycling of batteries: recovery of manganese in the form of electrolytic manganese dioxide.
Considering the growing demand for products containing manganese in its composition, this work seeks to verify the possibility of using depleted batteries as a source of manganese applying the electrolytic process. It was used an electrolyte solution containing the metal ions: Ca (270mg / L), Ni (3000 mg / L), Co (630 mg / L), Mn (115300 mg / L), Ti (400 mg
Publicado em: 2009
-
8. Analise comparativa de sistemas de armazenamento de energia eletrica fotovoltaica por meio de baterias e hidrogenio em localidades isoladas da região Amazonica / Comparative analysis of photovoltaic power storage systems by means of batteries and hydrogen in remote areas of the Amazon region of Brazil
In this work, comparative analyses of photovoltaic power storage were made, first by the traditional means employing lead-acid batteries, and second by means of electrolytic hydrogen which was later reconverted to power in a fuel cell. In order to design the two systems, it was used a load profile of the communities in Amazon region and by means of a mathema
Publicado em: 2008
-
9. Mecanismos reacionais e os processos de carga e descarga no caso de eletrodos planos de Pb em ácido sulfúrico e formação de eletrodos planos de PbO2 partindo de eletrodos de Pb
Two systems that form the basis of the lead-acid batteries were studied. The first system was the lead/sulfuric acid (Pb/H2SO4) interface. This interface is equivalent to negative electrode of lead acid batteries. The second system was the lead oxide/sulfuric acid (PbO2/H2SO4) interface. This interface is equivalente to the positive electrode of lead acid ba
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/10/2007
-
10. Sistema supervisorio de gestão de multiplas fontes de suprimento para aplicações em veiculos eletricos / Energy management supervisory system of multiple power sources for electric vehicle applications
This work introduces an Energy Management strategy, for electrical vehicle applications, based on a fuzzy logic supervisory system that is able to combine three different power supply sources, i. e., fuel cell, battery and supercapacitor. The supervisory system coordinates the power flow between the power sources so that the system is able to provide high po
Publicado em: 2007
-
11. AVALIAÇÃO METROLÓGICA DE PROCEDIMENTOS DE QUALIFICAÇÃO E ACEITAÇÃO DE BATERIAS PARA SISTEMAS FOTOVOLTAICOS / METROLOGICAL EVALUATION OF PROCEDURES FOR QUALIFICATION AND ACCEPTANCE OF BATTERIES FOR PHOTOVOLTAIC SYSTEMS
Este trabalho visa a analisar criticamente os procedimentos disponíveis para ensaios de baterias e sugerir modificações que os aperfeiçoem no âmbito do Programa Brasileiro de Etiquetagem (PBE), de modo a fornecer elementos que permitam avaliar o desempenho de Sistemas Fotovoltaicos para geração de energia elétrica em uma gama variada de situações.
Publicado em: 2006
-
12. Evaluation of lead-acid batteries state-of-charge by electrochemical impedance spectroscopy / Avaliação do estado de carga de baterias chumbo-acidas por espectroscopia de impedancia eletroquimica
Stationary lead-acid batteries must have their charge capacity periodically evaluated in order to assure that they are ready to supply energy during conventional supplier faults. Normally, these evaluations are conduct by capacity tests, which present these main disadvantages: batteries remain unavailable while tests are conducted and total energy accumulate
Publicado em: 2000