Magnesium Alloys
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Microstructure and Mechanical Properties of AA6061/AZ31B/AA6061 Composite Plates Fabricated by Vertical Explosive Welding and Subsequent Hot Rolling
In this study, three-ply Al/Mg/Al composite plates were successfully achieved by vertical explosive welding (EXW) method. After EXW, the sound joints were obtained. Then thin three-ply Al/Mg/Al EXWed composite plates with the thickness of 1.78 mm were achieved by hot rolling. The influence of annealing on the interface microstructures and mechanical properti
Mat. Res.. Publicado em: 04/10/2018
-
2. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)
ABSTRACT Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FS
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites
The processing of bulk metals through the application of severe plastic deformation leads to significant grain refinement and a consequent strengthening of the material. High-pressure torsion (HPT) generally refers to the processing of disk samples and this technique is especially effective in producing extremely small grains. Recently, new experiments were
Mat. Res.. Publicado em: 23/10/2017
-
5. Effects of Pre-Strain on the Evolution of Microstructure and Strain Hardening of Extruded Az31 Magnesium Alloy
Pre-compression 3% and pre-stretch 3% subsequent annealing at 200ºC for 2h are conducted on AZ31 magnesium alloys, then inverse tensile and compressive deformation are carried out at room temperature, respectively. During inverse tension 3% deformation on 1st pre-compression samples, detwinning behavior happens; after 2nd pre-compression 3%, the volume frac
Mat. Res.. Publicado em: 25/05/2017
-
6. Mechanical and microstructural behavior evolution of non-ferrous metals by ECASD
ABSTRACT In this study, Equal-Channel Angular Sheet Drawing- ECASD with a die set at 135° was used to produce plastic deformation onto an aluminum alloy AA-1100-O and a magnesium alloy AZ31-O samples, expecting a decreasing the grain size in order to increase the plasticity of these alloys under certain specific working conditions. In this study, the micros
Matéria (Rio J.). Publicado em: 02/05/2017
-
7. Surface Properties Contrast between Al Films and TiO2 Films Coated on Magnesium Alloys by Magnetron Sputtering
Al films and TiO2 films were separately coated on AZ31 magnesium alloy substrates by means of magnetron sputtering method. The surface properties of the samples were explored and compared. Scanning electron microscope (SEM) observed the compact structure characteristics of as-deposited Al films and TiO2 films. After heat treatment under 200ºC for half an ho
Mat. Res.. Publicado em: 20/02/2017
-
8. Friction Stir Welding of AZ31 Magnesium Alloys - A Numerical and Experimental Study
Abstract In this paper, weldability of magnesium alloys by friction stir welding (FSW) method which is difficult to join by the fusion welding have been investigated experimentally and numerically. To this end, the connection of magnesium alloys was performed using different welding parameters. AZ31 Mg-alloy plates were friction stir welded at rotation speed
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
9. Mg-based Nanocomposites for Hydrogen Storage Containing Ti-Cr-V Alloys as Additives
In this study, we have investigated the synthesis, microstructure and hydrogen storage properties of Mg-based nanocomposites containing different concentrations of TiCrV and TiCr1.2V0.8 alloys. The Mg-based nanocomposites of Mg containing Ti-Cr-V additives were prepared by reactive milling (RM) under hydrogen atmosphere. The structural characterization revea
Mat. Res.. Publicado em: 01/09/2016
-
10. Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
Abstract Friction stir spot welding (FSSW) is a process of recent development and interest, mainly in titanium alloys, since there are previous studies of aluminum alloys, magnesium, steel and polymers. Titanium alloys have a wide range of applications in the aeronautical industry, mainly in the components of commercial aircrafts as landing gear. Therefore,
Soldag. insp.. Publicado em: 2016-06
-
11. Microstructure and Mechanical Properties of Severely Deformed Mg-4.5Al-1.0Zn Alloy Processed by Asymmetric Rolling on Ingot and Twin Roll Cast Strip
The twin roll cast Mg-4.5Al-1.0Zn alloy sheets, processed by asymmetric rolling and subsequent annealing were investigated. The asymmetric rolling on Mg-4.5Al-1.0Zn ingot was also studied for comparison in terms of microstructure, texture and mechanical properties of the sheets. The results can be summarized as follows. The rolled sheets show intensively def
Mat. Res.. Publicado em: 05/02/2016
-
12. Effect of Calcium on Structure, Phase Composition and Hardening of Al-Zn-Mg Alloys Containing up to 12wt.%Zn
The influence of calcium on structure and phase composition of the aluminum alloys, containing additions of zinc up to 12 wt.% and magnesium (3.5 wt.%) was studied. The increase of Zn content leads to formation of Al4Ca primary crystals at lower concentrations of calcium. Zinc is distributed between aluminum solid solution and intermetalic phases (Ca-contain
Mat. Res.. Publicado em: 03/11/2015