Magnetic Circuit
Mostrando 1-12 de 49 artigos, teses e dissertações.
-
1. Determination of Electric and Magnetic Field Calculation Uncertainty in the Vicinity of Overhead Transmission Lines
Abstract This paper presents a new approach for uncertainty determination of the electric field intensity and magnetic flux density calculation in the vicinity of overhead transmission lines. The proposed method is based on the law of propagation of uncertainty as defined in the Guide to the expression of Uncertainty in Measurement. A mathematical model is d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Aqueous Extract of Cumaru (Dipteryx odorata) Seeds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution
The corrosion inhibition of mild steel by aqueous extract of cumaru (Dipteryx odorata) seeds and its high molecular weight fraction (HMWF) was investigated in 1 mol L-1 HCl solution. The study was carried out through gravimetric essays, open circuit potential measurements, anodic and cathodic polarization curves and electrochemical impedance analyses, as wel
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Association between poor tolerability of antidepressant treatment and brain functional activation in youth at risk for bipolar disorder
Objective: To investigate whether poor antidepressant tolerability is associated with functional brain changes in children and adolescents of parents with bipolar I disorder (at-risk youth). Methods: Seventy-three at-risk youth (ages 9-20 years old) who participated in a prospective study and had an available baseline functional magnetic resonance imaging
Braz. J. Psychiatry. Publicado em: 2021-02
-
4. Evaluation of Mass Loss in Different Stages of Printed Circuit Boards Recycling Employed in Temperature Controllers
The aim of this work was to evaluate mass loss in each stage of the recycling process for metal recovery from PCBs of controllers and temperature indicators of cold chambers. The stages of process consists of grinding, particle size classification, magnetic and electrostatic separation. It was analyzed 13 kg of PCBs. These PCBs were crushed and ground. The g
Mat. Res.. Publicado em: 02/12/2019
-
5. Enrichment of Copper, Lead, and Tin by Mechanical Dry Processing of Obsolete Printed Circuit Board Residues
Waste printed circuit boards (WPCB) residues were mechanically processed to concentrate their metal content aiming to reduce costs of the subsequent recovery of copper, tin, and lead. A fully dry route was proposed to avoid the generation of liquid effluents that would require additional treatment. Firstly, 10.7% of the residue was segregated by magnetic sep
Mat. Res.. Publicado em: 24/10/2019
-
6. A New Electrochemical Platform Based on a Polyurethane Composite Electrode Modified with Magnetic Nanoparticles Coated with Molecularly Imprinted Polymer for the Determination of Estradiol Valerate in Different Matrices
A polyurethane composite electrode modified with magnetic nanoparticles (mag; Fe3O4) coated with molecularly imprinted polymers (MIPs) was developed for the electrochemical determination of estradiol valerate. Chemical and morphological analyses of the mag-MIP were performed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (E
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
7. Operational conditions of an electrostatic separator for concentrate copper from electronic waste
Abstract Interest in recycling for the recovery of valuable substances, such as precious metals from electric and electronic waste has been increasing year after year due to the large amount present in such waste compared to primary sources. There is environmental concern, since the amount of this kind of waste is increasing due to rapid technological advanc
REM, Int. Eng. J.. Publicado em: 2018-07
-
8. Magnetic topology with axial flux concentration: a technique to improve permanent-magnet motor performance
Abstract This article presents a different topology for the magnetic circuit of permanent-magnet motors, using the concept of Axial Flux Concentration. By means of longitudinal extension of the rotor length beyond the stator core, a substantial increase in the flux per pole is enabled, improving the general performance of the machine. Even in low cost motors
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
9. Geometry optimization for application of radio frequency signals on diamond samples
This work describes the design and optimization of a printed circuit board containing a rectangular half-loop coil designed to apply radio frequency signals on micrometric diamond crystals. The structure was optimized to maximize the magnetic field perpendicular to the coil at 2,87 GHz. In the optimization process we have used transmission line theory, circu
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
10. ANALISE E PROJETO DO CONVERSOR BUCK INTERCALADO PARA ALIMENTAÇÃO DE LÂMPADAS DE DESCARGA EM ALTA PRESSÃO DE ALTA POTÊNCIA / INTERLEAVED BUCK CONVERTER ANALYSIS FOR HIGH POWER HIGH INTENSITY DISCHARGE LAMPS SUPPLYING
This work presents a detailed analysis about the interleaved buck converter applied to electronic ballasts to supply high power HID lamps, assuming the input voltage as a PFC stage output. As the output capacitor has a maximum value to be applied in parallel with the lamp, parallel operated converters are a suitable choice because the output current ripple c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
11. Os elementos finitos no estudo de eletromagnetismo utilizando os Software Gmsh/GetDP / The finite element method in electromagnetics study using the software Gmsh/GetDP
The aim of this master thesis is to study and develop two-dimensional and three-dimensional mathematical models, taking into account Maxwell s equations, the laws of material behavior and boundary conditions. Moreover, have discretization fields by finite element method using the Galerkin approach for electromagnetic analysis, and particularly problems of el
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/02/2012
-
12. Current transformers with nanocrystalline alloy toroidal core: analytical, computational and experimental studies
In this paper are presented theoretical analysis and experimental results concerning the performance of toroidal cores used in current transformers. For most problems concerning transformers design, analytical methods are useful, but numerical methods provide a better understanding of the transformers electromagnetic behaviour. Numerical field solutions may
Mat. Res.. Publicado em: 29/05/2012