Magnetic Lubricant
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. ESTUDO ATRAVÉS DE RMN DE 13C NO ESTADO SÓLIDO SOBRE A SÍNTESE DE OXIDO DE GRAFITE UTILIZANDO DIFERENTES PRECURSORES GRAFÍTICOS
The influence of the structural and microstructural characteristics of graphitic precursors on the production of graphite oxide (GO) is investigated in the present work. Six different graphitic precursors were used to produce GO following a modified Hummers method, namely: natural graphite, commercial lubricant graphite, milled graphite, graphite flakes, hig
Quím. Nova. Publicado em: 2017-10
-
2. Influence of Milling Time During the Mechanical Alloying Process on the Properties of Fe-3Si-0.75P Alloy
AbstractIn this study the soft magnetic alloy Fe-3Si-0.75P (wt%) was obtained by mechanical alloying through powder metallurgy. The processing included the formulation of metallic powder, wet milling for 1 h, 3 h, 6h and 9 h, in an attritor mill using alcohol P.A. as a lubricant. Cold compaction was then performed in a floating die under 600 MPa pressure and
Mat. Res.. Publicado em: 2015-10
-
3. Development and evaluation of a lubricant, using magnetic particles, in order to reduce friction in internal combustion engines / Desenvolvimento e avaliação de um lubrificante, com partículas magnéticas, destinado à redução de atrito em motores de combustão interna
Os motores de combustão interna (MCI) têm sido usados pela humanidade há mais de 100 anos e ainda continuarão por muito tempo em virtude da sua alta confiabilidade e baixo custo de produção. No entanto, eles apresentam grande impacto ambiental em relação à emissão de CO IND.2. Atualmente, diversos trabalhos têm sido realizados com o objetivo de re
Publicado em: 2009
-
4. H3PO4/Al2O3 catalysts: characterization and catalytic evaluation of oleic acid conversion to biofuels and biolubricant
Al2O3 and H3PO4/Al2O3 catalysts were investigated in the conversion of oleic acid to biofuels and biolubricant at 1 atm and at 623 K. The catalytic tests were performed in a fixed bed and continuous flow reactor, using an oleic acid-catalyst ratio of 4 and N2 as the carrier gas. The reaction products were analyzed by gas chromatography and acidity measuremen
Materials Research. Publicado em: 2006-06