Manufacturing Planning
Mostrando 1-12 de 92 artigos, teses e dissertações.
-
1. VALIDATION OF ANALYTICAL METHODS IN A PHARMACEUTICAL QUALITY SYSTEM: AN OVERVIEW FOCUSED ON HPLC METHODS
Analytical validation has fundamental importance in the scope of Good Manufacturing Practice (GMP) for pharmaceutical products since it establishes scientific evidence that an analytical procedure provides reliable results. However, even with validation guidelines available it is very common to observe misunderstandings in the execution of validation and dat
Quím. Nova. Publicado em: 2020-09
-
2. Energy planning and management during battery manufacturing
Abstract The aim of this study is to improve energy performance at a battery factory in Colombia by introducing the energy management approach defined in ISO 50001. In the study, the main energy consumptions were identified in the battery formation, the compressed air system and the large electric motors. An energy review was performed in the factory using m
Gest. Prod.. Publicado em: 10/10/2019
-
3. HYBRID MANUFACTURING SYSTEM WITH THREE OPTIONS OF REMANUFACTURED AND DISPOSAL ITEMS
ABSTRACT This study is devoted to the optimal control of a hybrid manufacturing system with returned products after usage, represented as an infant mortality mode under a periodic review policy. Three hybrid models have been discussed; remanufacturing is continuous along the planning period (without a disposal option), remanufacturing happened in the second
Pesqui. Oper.. Publicado em: 23/09/2019
-
4. Proposal of a model for sales and operations planning (S&OP) maturity evaluation
Abstract A successful S&OP implementation can bring many benefits to organizations, and after its implementation, the S&OP process can evolve and reach higher levels of maturity. Considering that, only through a measurement system, goals and benefits can be achieved, thus, it is essential to assess S&OP maturity level. Many papers on literature adopt a quant
Prod.. Publicado em: 27/11/2017
-
5. Evaluation of the Residual Stress State of 42crmo4 Steel Sheets in a Production Line
The residual stress state of a mechanical component is an important factor in its production planning and in estimates of its lifecycle since it can be responsible for geometric distortions and degradation of fatigue properties. Therefore, the development of reliable methods for non-destructively quantifying these stresses remains in the interest of most man
Mat. Res.. Publicado em: 05/02/2016
-
6. MRP OPTIMIZATION MODEL FOR A PRODUCTION SYSTEM WITH REMANUFACTURING
Science and technology practitioners have been studying how to take economical, social and environmental advantage of industrial residuals and discarded products. In this sense, this paper presents a Material Requirements Planning (MRP) optimization model for a particular production system that, besides manufacturing a final product and its main assembling c
Pesqui. Oper.. Publicado em: 2015-08
-
7. PRATICANDO GESTÃO DE OPERAÇÕES EM UM LABORATÓRIO DE GESTÃO
RESUMODescrever modelos de gestão de operações não é suficiente para ilustrar o dinamismo, a complexidade e a importância dessa atividade. As dificuldades de balanceamento entre teoria e prática na formação em gestão de operações sugerem a busca por iniciativas capazes de proporcionar um ambiente de aprendizagem que integre teoria e prática. Des
RAM, Rev. Adm. Mackenzie. Publicado em: 2015-08
-
8. Manufacture of custom-made cranial implants from DICOM® images using 3D printing, CAD/CAM technology and incremental sheet forming
INTRODUCTION: This work aims to pre-operatively manufacture custom-made low-cost implants and physical models (‘biomodels’) of fractured skulls. The pre-DOI: operative manufacturing of biomodels and implants allows physicians to study and plan surgery with a greater possibility of achieving the expected result. Customization contributes to both the esthe
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-09
-
9. Modelo de referência para integração de redes interorganizacionais com sistemas ERP / Reference model to integrate networks intercompany with ERP systems
The propose of this research is aim a reference model for the integration of the supply chain of companies with Enterprise Resource Planning systems (ERP), under the analytical approach of collaborative networks. Therefore a survey was conducted in major multifaceted actors that make up this collaborative network. The theoretical context permeates the concep
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/08/2012
-
10. Establishing a stem cell culture laboratory for clinical trials
Adult stem/progenitor cells are found in different human tissues. An in vitro cell culture is needed for their isolation or for their expansion when they are not available in a sufficient quantity to regenerate damaged organs and tissues. The level of complexity of these new technologies requires adequate facilities, qualified personnel with experience in ce
Revista Brasileira de Hematologia e Hemoterapia. Publicado em: 2012
-
11. MODELO DE PLANEJAMENTO DE TECNOLOGIA DA INFORMAÇÃO PARA EMPRESAS MANUFATUREIRAS DE PEQUENO E MÉDIO PORTE DE ALIMENTOS E BEBIDAS / INFORMATION TECHNOLOGY PLANNING MODEL APPLIED TO FOOD AND BEVERAGE SMALL AND MEDIAN MANUFACTURING ENTERPRISES
As variáveis determinantes do desempenho das pequenas e médias empresas (PMEs) estão associadas aos aspectos de capacidade empreendedora, economia regional, posicionamento no mercado e gestão operacional. Todos esses aspectos são influenciados pelo uso da tecnologia da informação (TI). Esta tese investiga os fatores intervenientes no processo de gest�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/09/2011
-
12. Social and Environmental Impacts Caused by Ceramic Industry Activities of the Municipality of Red Crato-Ce / Impactos socioambientais causados pelas atividades da indÃstria de cerÃmica vermelha do municÃpio de Crato-Ce
The ceramic activity has an important role in the Brazilian economy. However there are big impacts on the environment and society, causing changes in the environment and in the lives of people who perform these activities or live close to sites of raw-material exploitation or manufacturing of ceramic products. In this perspective, this study aimed to analyze
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/08/2011