Material Model
Mostrando 1-12 de 1525 artigos, teses e dissertações.
-
1. Evaluation of the Properties of LaNiO3 Material Prepared by the Modified Proteic Method for Adsorption of Environmental Contaminants
LaNiO3 material was synthesized by modified proteic method, calcined at 900 °C/2 h in air atmosphere and was applied to remove environmental contaminants. LaNiO3 phase with a perovskite structure was formed in the calcined material, which has a surface area of 22 m2 g-1 and is formed by fine particles agglomerated, with pH of the zero charge point of 7.44.
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. O Modelo de Barras de Singapura na Resolução de Problemas Aritméticos e Algébricos
Resumo As representações figurais assumem importante papel na aprendizagem e compreensão conceitual da Matemática, a exemplo do caso de figuras em demonstrações da geometria. Uma abordagem que tem se popularizado pelo seu potencial para a resolução de problemas utilizando representações figurais é o Modelo de Barras de Singapura (‘ Model’ Meth
Bolema: Boletim de Educação Matemática. Publicado em: 2022
-
3. INTERDISCIPLINARY EDUCATION THROUGH THE DEVELOPMENT OF A COST-EFFECTIVE PHOTOMETRIC PH METER SENSOR USING NATURAL PIGMENTS
There is a trend of development of analytical methodologies and technologies that allow in situ analysis, producing accurate information in real time, at low cost, using homemade experiments and devices to increase interest in scientific knowledge with a constructive approach in an interdisciplinary perspective in Chemistry Education. In this context, a phot
Química Nova. Publicado em: 2022
-
4. Thermal, structural and optical properties of magnetic BiFeO3 micron-particles synthesized by coprecipitation method: heterogeneous photocatalysis study under white LED irradiation
Abstract Bismuth ferrite, BiFeO3 (BFO) prepared via a coprecipitation method, was used as an effective photocatalyst for the degradation of methylene blue (MB) using a white light-emitting diode (LED-50 W) lamp. The as-prepared material was characterized by TGA, XRD, SEM-EDX, FTIR, and UV-vis-DRS techniques. The effects of experimental key parameters such as
Cerâmica. Publicado em: 2022
-
5. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
6. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
7. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
8. Indicator kriging applied to RMR geomechanical modelling in a Pb-Zn deposit case study
Abstract The opening of a mining enterprise requires knowledge of the geomechanical characteristics of the mineral deposit, which will be worked according to the use of parameters of stability and/or resistance of the material, as well as the discontinuities present in the rock. In this study, the Rock Mass Rating methodology was used to propose a geomechani
REM, Int. Eng. J.. Publicado em: 2021-06
-
9. Athletes Health during Pandemic Times: Hospitalization Rates and Variables Related to COVID-19 Prevalence among Endurance Athletes
Abstract Background The SARS-COV2 pandemic has deeply affected the availability for training and competing for recreational and professional athletes. However, to date, the disease’s course among the athletic population has not been *studied . Objectives To compare the observed and expected rates of hospitalization for COVID-19 and to establish relations
Int. J. Cardiovasc. Sci.. Publicado em: 2021-06
-
10. ENERGY STUDY OF A GREENHOUSE AND OPTIMISATION OF THE CHOICE OF SHAPE AND COVERING MATERIAL: BASED ON AN IMPROVED STATIC MODEL
ABSTRACT This paper presents a new approach to properly estimate energy consumption inside a greenhouse. In this study, we have adopted improved classical modelling to evaluate the energy balance of a greenhouse with a higher precision. While the traditional classical model focuses mainly on the cooling and heating (and denies the deep influence of lighting
Eng. Agríc.. Publicado em: 2021-05
-
11. QUANTIFICAÇÃO DE MULLITA PROVENIENTE DE RESÍDUOS DE CAULIM DA REGIÃO AMAZÔNICA: USO DO MÉTODO DE RIETVELD
Mullite is used to obtain a refractory material, there are several factors that influence the synthesis process of mullite: the preparation of the mixture, the precipitation and the reaction of SiO2 and Al2O3. For the synthesis of mullite, samples of kaolin processing residues were used as precursor material, because it presents SiO2 and Al2O3 in its composi
Quím. Nova. Publicado em: 2021-04
-
12. Local tissue reaction and histopathological characteristics of three different bulking agents: a rabbit model
ABSTRACT Purpose: We assessed the efficacy and safety of a single injection of three bulking agents over the short- and long-term follow-ups in rabbits. Dermal and preputial matrices were compared with Deflux (DxHA) injection. Material and methods: Twenty-four rabbits were divided into three groups. Group I (n=8) underwent the injection of a lyophilized de
Int. braz j urol.. Publicado em: 2021-03