Materials Structure Testing
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
2. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019
-
3. Experimental and numerical investigation on the dumbbell-shaped specimen of concrete-like materials under tension
Abstract Mortar is an important component of concrete. It is of great significance to obtain its tensile properties accurately. The structure heterogeneity of mortar specimens is high. Specimens are prone to fracture nearby interfaces between specimens and loading plates because of the inhomogenous stress distribution during the testing, which leads that ef
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
4. The effect of silver nanoparticles on composite shear bond strength to dentin with different adhesion protocols
Abstract In Dentistry, restorative materials and oral bacteria are believed to be responsible for restoration failure. To make long-lasting restorations, antibacterial agents should be made. Inorganic nanoparticles and their nano composites are applied as good antibacterial agents. Objective The purpose of this study was to investigate the effect of silver
J. Appl. Oral Sci.. Publicado em: 2017-08
-
5. Synthesis, characterization and cytotoxicity of Chitosan/Polyvinyl Alcohol/Bioactive Glass hybrid scaffolds obtained by lyophilization
ABSTRACT One of the important research topics in tissue engineering is the development of optimum three-dimensional scaffolds for regeneration and growth of bone tissue. The scaffold developed should promote an initial biomechanical support, provide the formation, deposition and organization of the new organic matrix generated, and degrade proportionally to
Matéria (Rio J.). Publicado em: 2016-12
-
6. Strength and Durability of Mortar Using Cork Waste Ash as Cement Replacement
Cork powder, the major waste from cork processing industries, is generated from grinding, cutting and finishing operations throughout the industrial cork process. Cork powder has been used mainly as fuel in cork industries. Cork waste ash is usually landfilled but if efficiently used in cement based construction materials it could contribute to sustainabilit
Mat. Res.. Publicado em: 01/07/2014
-
7. Poliuretanos obtenidos a partir de aceite de higuerilla modificado y poli-isocianatos de lisina: síntesis, propiedades mecánicas y térmicas y degradación in vitro
Biodegradable polyurethanes (PUR) were prepared from polyols derived from castor oil by transesterification of pentaerythritol-modified castor oil and lysine polyisocyanates (LDI and LTI). The polyurethanes obtained were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and dynamic mechanical thermal analysis (DMTA).
Quím. Nova. Publicado em: 2014
-
8. Análise crítica do ensaio de determinação da curva mestre (ASTM E 1921) aplicado a um aço da classe API 5L X80. / Critique analyse of essay of determination of master curve (ASTM E 1921) applied the an API 5L X80 steel.
One of the key aspects of structural integrity is the consideration of scale effects characteristic of materials wich present quase-brittle behavior. The Master curve method, designed for ferritic steels operating at temperatures in the materials corresponding to the ductile-brittle transition. This method combine charpy impact testing and a few fracture tou
Publicado em: 2011
-
9. Measuring statistical geometric properties of tomographic images of soils
Porous media modeling is relevant in several applications, such as agricultural engineering, where soil compaction analysis requires the estimation of soil transport properties. For example, the prediction of root growing patterns and their environmental impact is usually measured by analyzing soil fluid infiltration capacity and water retention. Recently, t
Publicado em: 2011
-
10. Contribution to the development of performance specifications for concretes containing blast furnace slag / Contribuição ao desenvolvimento de especificações por desempenho para concretos com escoria de alto-forno
In 2008 alone, the annual steel production in Brazil was around 31 million tons. The steel production process generates an average of 500 kg of residues and co-products per ton of steel. From this total, 70% corresponds to the slags. Although investigating the increase of blast furnace slag use is of extreme importance for the concrete and steel industries s
Publicado em: 2010
-
11. Análise mecânica de retentores intra-radiculares / Mechanical analysis of endodontic post
The fiber-reinforcement composite (FRC) posts introduced the new concept of restorative system, in which the various components of the reconstruction: post, cement, filling material and dentin have now become a complex mechanically homogeneous. The knowledge of the structure, composition and physical properties of these fiber posts systems is important in or
Publicado em: 2010
-
12. Um estudo de caracterização e avaliação de critérios de teste estruturais entre os paradigmas procedimental e OO / A characterization and evaluation study of structural testing criteria between procedural and OO testing
Software Testing is a quality assurance activity that aims at reducing the number of software faults. This activity contributes for the reduction of maintenance costs and for software quality improvement during the development process. These factors have motivated the investigation and proposal of several testing strategies, techniques, criteria and tools fo
Publicado em: 2009