Matrix Sem Conductivity
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Synthesis of Hybrid Monolithic Columns Using a Click Chemistry Reaction for Application in Capillary Liquid Chromatography
Hybrid monolithic columns present characteristics of both silica and organic monoliths, such as good mechanical properties, wide pH tolerance, high permeability and stability and little swelling or shrinkage. A common way to prepare this type of material is by using alkoxysilanes and organic monomers via the sol-gel process and click chemistry reactions. In
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
2. Production and quality of okra produced with mineral and organic fertilization
RESUMO A cultura do quiabeiro Abelmoschus esculentus (L.) Moench é uma hortaliça de fruto anual originária de regiões quentes da África tendo se adaptado bem às condições das regiões Nordeste e Sudeste do Brasil, onde é uma cultura muito utilizada por pequenos agricultores. Objetivou-se avaliar o efeito da adubação mineral e orgânica na produç�
Rev. bras. eng. agríc. ambient.. Publicado em: 2019-02
-
3. Preparation and Ablation Performance of Lightweight Phenolic Composite Material under Oxyacetylene Torch Environment
ABSTRACT The present study investigates the influence of fiber content on thermal properties of short silica fiber (SSF) reinforced modified resole resin (MRR) composites. For this purpose, different SSF loading composites were prepared: 40, 55, and 65 wt.%. The ablation resistance related to mass loss parameters was quantified by testing under an oxyacetyle
J. Aerosp. Technol. Manag.. Publicado em: 21/06/2018
-
4. Synergistic Effect of EG and Cloisite 15A on the Thermomechanical Properties and Thermal Conductivity of EVA/PCL Blend
The purpose of this study was to investigate the synergy of expanded graphite (EG) and Cloisite 15A (C15A) on the thermal conductivity and thermomechanical properties of ethylene-vinyl acetate copolymer/poly ( ɛ-caprolactone) (EVA/PCL) blend. Scanning electron microscopy (SEM) results showed that the blend had a phase separation, in which the PCL phase (app
Mat. Res.. Publicado em: 01/12/2016
-
5. Polypyrrole/Metal Sulphide Hybrid Nanocomposites: Synthesis, Characterization and Room Temperature Gas Sensing Properties
Abstract The present research work explores the room temperature gas sensing ability of hybrid nanocomposites of metal sulphide nanoparticles with polypyrrole (PPy) matrix. Sonochemically synthesized both silver sulphide (Ag2S) and cadmium sulphide (CdS) nanoparticles were mixed in varying ratios with PPy matrix by in-situ oxidative polymerization route. The
Mat. Res.. Publicado em: 01/08/2016
-
6. Construção de sensores eletroquímicos utilizando como matriz materiais cerâmicos SI O IND. 2 / M IND. X O IND. Y , e materiais cerâmicos eletricamento condutores SI O IND. 2 / C/ M IND. X O IND. Y , preparados pelo processo sol-gel / Construction of electrochemical sensors using ceramic materials SI O IND. 2 / M IND. X O IND. Y and electrically conducting ceramic materials SI O IND. 2 /C/ M IND. X O IND. Y as matrix, prepared for the sol-gel process
This work describes the synthesis and characterization of three different materials: SiO2/SnO2, SiO2/SnO2/Sb2O5 and the film of Nb2O5 formed on the surface of the ceramic material SiO2/C obtained by sol-gel process and to use them as matrix in the development of electrochemical sensors. The mixed oxides, SiO2/SnO2, were synthesized using as source of SnO2, S
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/04/2012
-
7. The effect of reinforcement volume ratio on porosity and thermal conductivity in Al-Mgo composites
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt stirring. In the production of composites, EN AW 1050A aluminum alloy was used as the matrix material and MgO powders with particle size of -1
Mat. Res.. Publicado em: 09/10/2012
-
8. Nanocompósitos de poliuretana termoplástica e nanotubos de carbono de paredes múltiplas para dissipação eletrostática
Polyurethane/multi-walled carbon nanotube (MWCNT) nanocomposites have been prepared with nanotube concentrations between 0.01 wt% and 1 wt%. MWCNT as-synthesized samples with ~74 nm diameter and ~7 μm length were introduced by solution processing in the polyurethane matrix. Scanning electron microscopy (SEM) images demonstrated good dispersion and adhesion
Química Nova. Publicado em: 2010
-
9. Sodium lignosulphonate as agent of modification of lignocellulosic fiber surface and formulation of phenolic thermoset / Lignosulfonato de sódio como agente de modificação da superfície de fibras lignocelulósicas e da formulação de termorrígido fenólico
Due to the great current interest in biocomposites because of both the use of lignocellulosic fibers as reinforcers of polymer matrices and the production of matrices prepared from renewable raw material, this study has sought to improve the properties of phenolic thermosets using sodium lignosulphonate as a macromonomer, and the insertion of sisal fibers, e
Publicado em: 2010
-
10. ESTUDO DAS PROPRIEDADES ELÉTRICAS DE COMPÓSITOS CARBONO-ARGILA OBTIDOS A PARTIR DA BORRA DE PETRÓLEO PELO MÉTODO DE QUATRO PONTAS / STUDY OF ELECTRICAL PROPERTIES OF CARBON-CLAY COMPOSITES OBTAINED FROM THE METHOD OIL SLUDGE FOUR TIPS
The petroleum industry produces significant amounts of residues in several of its processes, from the perforation of wells, production, storage, transport and refining, to the distribution of its derivatives. The wastewater generated in the oil extraction step is known as produced water and, when stored in flotation tanks, if generates a residue called oily
Publicado em: 2010
-
11. Study of morphology influence on the electric properties of the pani and devulcanizated EDPM blend. / Estudo da influência da morfologia sobre as propriedades elétricas da blenda de PAni com EPDM desvulcanizado por microondas, proveniente do descarte da indústria de autopeças.
Polyaniline doped with dodecylbenzenesulfonic acid (PAni-DBSA) and ethylene-propylene-diene-monomer (EPDM) rubber devulcanizated by microwave (dEPDM) blends have been prepared by mechanical process. Flexible, free-standing and stretchable films have been obtained, which have been characterized by electrical conductivity measurements, FTIR, XRD, DSC, TGA, DMT
Publicado em: 2008
-
12. Chemical modifications in lignocellulosic fibers to obtain and use in biosensor array phenolic derivative of LCC and the biosorption of metals / Modificações químicas em fibras lignocelulósicas para obtenção e aplicação em biocompósitos de matriz fenólica derivada de LCC e na biossorção de metais
In this work, lignocellulosic fibers from two sources (sisal and banana pseudo stem) were used as reinforcing agents in the preparation of phenolic matrix composites derived from cashew nut shell liquid (CNSL) and as material to adsorb toxic metals (Pb+2, Ni+2, Cd+2, Zn+2 and Cu+2). Surface changes were induced in the sisal fibers by immersion in alkali solu
Publicado em: 2008