Mechanical Measurements
Mostrando 1-12 de 438 artigos, teses e dissertações.
-
1. Silicon carbide hollow fiber membranes developed for the textile industry wastewater treatment
Abstract In order to reduce the impacts of the industrial effluent on the environment, silicon carbide hollow fiber membranes were prepared by the precipitation-immersion technique and sintered at 1450 and 1500 °C. The membranes were characterized by X-ray diffraction, their surface structure was characterized by scanning electron microscopy and atomic forc
Cerâmica. Publicado em: 2021-06
-
2. DEVELOPMENT OF A PNEUMATIC OLIVE HARVESTER
ABSTRACT A pneumatic olive harvester was developed and evaluated in this study. The components of the developed machine were the limb clamp, vibrating unit, control elements, main tube, air-pressured hoses, control valve, and power source. The measurements that related to the development of the harvester were fruit and limb damage, and some physical and mech
Eng. Agríc.. Publicado em: 2021-05
-
3. Cardiac Output Values and Correlation of Renal Injury with Neutrophil Gelatinase-Associated Lipocalin Levels in Off-Pump Coronary Artery Bypass Patients
Abstract Objective: To investigate the correlation between cardiac output values and renal neutrophil gelatinase-associated lipocalin (NGAL) levels as a biomarker of renal ischemia. Methods: Forty patients, who underwent off-pump coronary artery bypass (OPCAB) surgery and in whom the positioning of the heart was fixed with simple suspension sutures without
Braz. J. Cardiovasc. Surg.. Publicado em: 2020-12
-
4. Microstructural and mechanical characterisation of the Simon Bolivar's iron bridge structure, 19th century, Arequipa, Peru
Abstract The microstructure of the main structural elements (Phoenix columns, transversal beams and tie-rods) of the Simón Bolivar iron bridge, located in Arequipa (Peru), was investigated. The bridge was supposedly designed by Gustave Eiffel and opened to the public in 1882. The characterisation revealed that the columns, beams and tie-rods are made of pud
REM, Int. Eng. J.. Publicado em: 2020-12
-
5. A Symmetrical Dirhenium(I) Complex with 4,4’’-Azobis(2,2’-bipyridine) as a Bridging Ligand: Synthesis, Physicochemical Properties and Applications in Detection of Biologically Relevant Thiols and in Chemotherapy for Bone Cancer
A new dinuclear complex of formula [{Re(CO)3(py)}2(µ-4,4”-azobpy)](PF6)2, with py = pyridine and 4,4”-azobpy = 4,4”-azobis(2,2’-bipyridine), has been synthesized and characterized by spectroscopic and electrochemical techniques. The symmetrical nature of the dimetallic cation has been confirmed by nuclear magnetic resonance (NMR) measurements. When
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
6. Cation Vacancies in NiFe2O4 During Heat Treatments at High Temperatures: Structural, Morphological and Magnetic Characterization
Nickel ferrite (NiFe2O4) was synthesized by mixing stoichiometric amounts of α-Fe2O3 and NiO using mechanical milling and heat treatments at high temperatures. The physical characterization of the samples was carried out using X-ray diffraction, infrared and Raman spectroscopies, Mössbauer spectrometry, magnetization measurements, scanning electron microsc
Mat. Res.. Publicado em: 20/12/2019
-
7. Síndrome do desconforto respiratório: influência do manejo sobre o estado hemodinâmico de recém-nascidos pré-termo ≤ 32 semanas nas primeiras 24 horas de vida
RESUMO Objetivo: Investigar a influência do manejo da síndrome do desconforto respiratório sobre parâmetros clínicos e ecocardiográficos de avaliação hemodinâmica em recém-nascidos ≤ 32 semanas. Métodos: Foram avaliados prospectivamente 33 recém-nascidos ≤ 32 semanas, submetidos à ventilação mecânica invasiva. A necessidade de surfactan
Rev. bras. ter. intensiva. Publicado em: 14/10/2019
-
8. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Evaluation of volume responsiveness by pulse pressure variability and inferior vena cava dispensability index at different tidal volumes by mechanical ventilation
This study investigated the effects of tidal volume (TV) on the diagnostic value of pulse pressure variation (PPV) and the inferior vena cava dispensability index (IVC-DI) for volume responsiveness during mechanical ventilation. In patients undergoing elective surgery with mechanical ventilation, different TVs of 6, 9, and 12 mL/kg were given for two min. Th
Braz J Med Biol Res. Publicado em: 29/08/2019
-
11. The role of maximum compressed thickness of the quadriceps femoris muscle measured by ultrasonography in assessing nutritional risk in critically-ill patients with different volume statuses
RESUMO OBJETIVO Neste estudo observacional prospectivo, objetivamos investigar o papel da espessura do músculo quadríceps femoral (QFMT) comprimido (mc) e não comprimido (uc) medida pela ultrassonografia (USG) na detecção do risco nutricional em pacientes de terapia intensiva (ICPs) com status de volume diferente. MÉTODOS Cinquenta e cinco paciente
Rev. Assoc. Med. Bras.. Publicado em: 05/08/2019
-
12. Simulação do Processo de Soldagem Elétrica por Centelhamento de um Aço para Trilhos Ferroviários. Parte 1: Análise de Tensões Residuais Via Elementos Finitos
Resumo Trilhos longos, soldados pelo processo Flash Butt Welding (FBW), são a realidade das ferrovias brasileiras de média e alta carga por eixo. Embora apresentem características desejáveis do ponto de vista do comportamento dinâmico da via, as soldas são regiões de descontinuidade estrutural e mecânica onde se originam tensões residuais, e que est
Soldag. insp.. Publicado em: 27/06/2019