Mechanical Spectroscopy
Mostrando 1-12 de 296 artigos, teses e dissertações.
-
1. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
2. Effect of sintering temperature on mechanical and bioactivity properties of bioactive glass and cordierite composite
Abstract In this study, a composite of bioactive glass (BG) and cordierite (BG-cord) was proposed to increase the strength and bioactivity of BG. Both BG and cordierite were separately synthesized with the method of glass melting, then, they were used to fabricate BG-cord with a variation of sintering temperature (600 to 1000 °C). The highest diametral tens
Cerâmica. Publicado em: 2022
-
3. Chemometric Evaluation of Poly(3-hexylthiophene) Electrochemical Aging Path as a Function of Electrochemical Synthesis Variables
Conductive polymers are versatile materials that can be applied in many different technology fields, especially green energy. They have several advantages, such as easy synthesis, low density, and cost. However, its electric conduction property is also related to material aging with great loss of their characteristics, limiting their applicability. The in-de
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
6. MÉTODO MANUAL PARA DEPOSIÇÃO DE TINTAS FOTOLUMINESCENTES BASEADAS EM LOFS MISTAS APLICADO A CODIFICAÇÃO DE DOCUMENTOS
In this work, the process of synthesis of Metal-Organic Frameworks containing lanthanide ions (LOFs), accelerated via a precipitating agent, capable of accelerating the process of nucleation of MOF crystals, in order to explore the optical properties of this precursor solution (SP_Gd/EU-MOF), as a quick-response photoluminescent material in the coding of off
Quím. Nova. Publicado em: 2020-12
-
7. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
8. Cation Vacancies in NiFe2O4 During Heat Treatments at High Temperatures: Structural, Morphological and Magnetic Characterization
Nickel ferrite (NiFe2O4) was synthesized by mixing stoichiometric amounts of α-Fe2O3 and NiO using mechanical milling and heat treatments at high temperatures. The physical characterization of the samples was carried out using X-ray diffraction, infrared and Raman spectroscopies, Mössbauer spectrometry, magnetization measurements, scanning electron microsc
Mat. Res.. Publicado em: 20/12/2019
-
9. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
10. Cotton Fabric Bleached with Seawater: Mechanical and Coloristic Properties
The textile industry needs a high volume of water to carry out its processes, which among them; textile chemical finishing is the main responsible for high water expenditure. However, nowadays there is a worldwide concern regarding the scarcity of fresh water. This research aims to study the use of seawater in the cotton bleaching process and compare the res
Mat. Res.. Publicado em: 02/12/2019
-
11. Mineral deposition promoted by resin-based sealants with different calcium phosphate additions
Abstract The aim of this study was to evaluate the influence of different calcium phosphates (CaPs) on the physical, biological, and remineralizing properties of experimental resin-based sealants (RBSs). Triethylene-glycol dimethacrylate (90wt%) and bisphenol A-glycidyl methacrylate (10wt%) were used to produce resin-based sealants. Hydroxyapatite (SHAp), α
Braz. oral res.. Publicado em: 25/11/2019
-
12. Synthesis of Hybrid Monolithic Columns Using a Click Chemistry Reaction for Application in Capillary Liquid Chromatography
Hybrid monolithic columns present characteristics of both silica and organic monoliths, such as good mechanical properties, wide pH tolerance, high permeability and stability and little swelling or shrinkage. A common way to prepare this type of material is by using alkoxysilanes and organic monomers via the sol-gel process and click chemistry reactions. In
J. Braz. Chem. Soc.. Publicado em: 24/10/2019