Melt Spinning
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Influência do Ti e da taxa de resfriamento na microestrutura e na temperatura MS em ligas Ni-Ti com EMF solidificadas rapidamente
RESUMO Um grande desafio no projeto de microssistemas é a implementação de princípios eficientes de atuação miniaturizados em microescala. Ligas com efeito memória de forma (EMF) têm sido consideradas como uma solução potencial para este problema, uma vez que estes materiais oferecem propriedades atraentes como grande deformação e capacidade para
Matéria (Rio J.). Publicado em: 02/05/2017
-
2. Effect of Spun Velocities and Composition on the Microstructure and Transformation Temperatures of TiNi Shape Memory Ribbons
Ti‒50.13Ni and Ti‒49.62Ni (at.%) shape memory alloy ribbons were fabricated by melt-spinning method at different circumferential wheel velocities. The effects of wheel velocity, chemical composition and heat treatments on microstructure and Transformation temperature were investigated. Differences in wheel velocity led to differences in cooling rate and
Mat. Res.. Publicado em: 12/09/2016
-
3. Effect of solution concentrations on the morphology of nylon6/66 nanofibrous yarns by blown bubble-spinning
In this paper, a novel method called blown bubble-spinning was employed to produce nanofibers. Compared with the traditional technologies, such as melt blowing and electrospinning, hot airflow is used in blown bubble-electrospinning to overcome the surface tension of the polymer bubbles and to pull multiple jets from the broken bubble into nano scale ones wh
Matéria (Rio J.). Publicado em: 2014-12
-
4. Hydrogen absorption study of ti-based alloys performed by melt-spinning
The hydrogen absorption and desorption of Ti53Zr27Ni20 icosahedral quasicrystal (ICQ) and Ti50Ni50 shape memory alloy (SMA) melt-spun ribbons was studied. Samples were exposed to hydrogen gas at 623 K and 4 MPa for 1000 minutes. The total capacity of hydrogen obtained for Ti53Zr27Ni20 and Ti50Ni50 was 3.2 and 2.4 wt. % respectively. The Thermal Desorption Sp
Mat. Res.. Publicado em: 02/04/2013
-
5. Propriedades mecânicas das ligas Ti34Cu36Ni8Zr22 e (TiZr)80Co12Fe8 / Mechanical Properties of Ti34Cu36Ni8Zr22 and (TiZr)80Co12Fe8 Alloys
Ligas amorfas e nanocristalinas de grande volume vêm despertando grande interesse da comunidade científica. Ligas à base de titânio têm demonstrado potencial para formação de amorfo. O presente estudo objetivou avaliar as propriedades mecânicas, em temperatura ambiente, das ligas Ti34Cu36Ni8Zr22 e (TiZr)80Co12Fe8. Para tanto, foram realizados ensaios
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2012
-
6. Magnesium-Nickel alloy for hydrogen storage produced by melt spinning followed by cold rolling
Severe plastic deformation routes (SPD) have been shown to be attractive for short time preparation of magnesium alloys for hydrogen storage, generating refined microstructures and interesting hydrogen storage properties when compared to the same materials processed by high-energy ball milling (HEBM), but with the benefit of higher air resistance. In this st
Mat. Res.. Publicado em: 09/08/2012
-
7. New Zr-based glass-forming alloys containing Gd and Sm
The effect of minor additions of Gd and Sm on the glass-forming ability (GFA) of Cu-Zr-Al alloys is investigated here. The rationale for these additions is the fact that the atomic size distribution can increase GFA by changing the topology of the alloy as a function of cluster stability, which is tied to the electronegativity and ionic and covalent nature o
Mat. Res.. Publicado em: 09/08/2012
-
8. Selection of compositions with high glass forming ability in the Ni-Nb-B alloy system
A combination of an extension of the topological instability "λ criterion" and the "average electronegativity" has been recently reported in the literature to predict compositions with high glass-forming ability (GFA). In the present work, both criteria have been applied to select the Ni61.0Nb36.0B3 alloy with a high glass-forming ability. Ingots were prepa
Mat. Res.. Publicado em: 07/08/2012
-
9. Caracterização de materiais amorfos, através de medidas de GMI e GMI-FORC / Characterization of amorphous materials by GMI and GMI-FORC measurement
No nosso trabalho utilizamos o fenômeno da magnetoimpedância gigante (GMI) como uma ferramenta de pesquisa na caracterização de ferromagnetos amorfos. Estes materiais são muito moles do ponto de vista magnético, o que pode servir para diversas aplicações, tais como na construção de sensores e de dispositivos de alta frequencia. Na primeira parte da
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/11/2011
-
10. Tendência de formação de fase amorfa em ligas a base de magnésio para biomaterial temporário / Evaluation of the glass forming ability in mg-zn-ca alloys for biomedical application
Mg alloys have attracted attention as potential implant material because of their good mechanical properties, biocompatibility and biodegradation properties. However corrosion of these alloys causes intense release of hydrogen gas which is not desirable for biomedical applications. Zberg et. al. reported a significant reduction in hydrogen evolution in Mg-Zn
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/10/2011
-
11. Novas ligas formadoras de fase amorfa do sistema Ni-Nb-Zr e seu comportamento mecânico / New amorphizable alloys from ni-nb-zr system and its mechanical behavior abstract
As ligas amorfizáveis de grande volume ou maciças à base de Ni apresentam boa combinação de propriedades, com altos valores de resistência mecânica e dureza, boa dutilidade e excelente resistência à corrosão. Essas ligas têm sido utilizadas em recentes aplicações tecnológicas, por exemplo, em sensores de pressão e em motores com microengrenage
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2011
-
12. Avaliação da tendência à formação de fase vítrea nas ligas à base de alumínio do sistema Al-Y-Fe
O presente trabalho teve por objetivo estudar a tendência à formação de vidros glass-forming ability (GFA) das ligas do sistema alumínio-ítrio-ferro (Al-Y-Fe). O trabalho incluiu a preparação de amostras através da técnica de melt-spinning, variando-se a composição química das ligas. O estado estrutural das mostras foi caracterizado pelas técni
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 03/08/2009