Metal Alloys
Mostrando 1-12 de 174 artigos, teses e dissertações.
-
1. MECANISMO DE EVOLUÇÃO DE HIDROGÊNIO DURANTE A CORROSÃO DA LIGA 2198-T8 EM MEIO CONTENDO CLORETO: UMA ABORDAGEM ELETROQUÍMICA
Corrosion is still one of the most serious and frequent problems in industries. The phenomena involved in the corrosion mechanism of Al-alloys may be explained by formation of galvanic cells between the metal matrix and heterogeneities, such as precipitates, intermetallic phases leading to potential differences and electrochemical reactions. In the cathodic
Quím. Nova. Publicado em: 2020-09
-
2. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
3. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
4. Torsional fatigue strength of reciprocating and rotary pathfinding instruments manufactured from different NiTi alloys
Abstract To evaluate the torsional properties of engine-driven pathfinding instruments manufactured from different NiTi alloys – R-Pilot (tip size 12.5;.04 taper; M-Wire) and One G (tip size 14;.03 taper; Conventional NiTi). A total of 40 NiTi instruments from engine-driven pathfinding instruments (n = 20) were used. The torsion tests followed ISO 3630-1 (
Braz. oral res.. Publicado em: 28/10/2019
-
5. Effect of Squeeze Casting on Microhardness and Microstructure of Al-3Cu-xSi Alloy
Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase. Squeeze Casting is a casting process in which the cast metal is deposited in a metal mold and solidified under certain pressure exerted by a punch. This process
Mat. Res.. Publicado em: 30/09/2019
-
6. Microstructure and Fracture of 50Mo-50Re Vacuum Brazed with Fe-Si-B Filler Metal
Microstructural evolution, interfacial reaction and fracture during vacuum brazing of 50Mo-50Re alloys using amorphous alloy Fe-5.6Si-2.6B(wt%) were investigated. A binary intermetallic compound, σ(Mo2Re3) formed as parallel contiguous layers in the diffusion zone. In addition, Fe from the braze alloy, in combination with dissolved Mo from the substrate, fo
Mat. Res.. Publicado em: 30/09/2019
-
7. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Equipamento Automatizado de Soldagem Capacitiva para Termopares
Resumo Os termopares são dispositivos elétricos de simples concepção utilizados na medição de temperatura, e possuem um grande uso na indústria. O termopar necessita de uma junção eficiente para os dois fios metálicos que o compõem, que comumente é feita pela soldagem. O processo de soldagem utilizado para construir um termopar pode ser feito de
Soldag. insp.. Publicado em: 15/08/2019
-
9. Solidification Furnace Developed for Sounding Rockets: Rio Verde Mission
ABSTRACT Brazil has a Microgravity Program mainly based on experiments using sounding rockets. Up to now, four missions have been carried out with approximately 35 experiments submitted in total. In all flights, the Associate Laboratory of Sensors and Materials of the Brazilian Space Research Institute (LABAS/INPE) participated with a fast solidification fur
J. Aerosp. Technol. Manag.. Publicado em: 03/06/2019
-
10. Corrosion of galvanic pairs of dental alloys copper base with silver amalgams in artificial saliva
ABSTRACT Galvanic corrosion is a metal dissolution process that occurs when two metals of different electrochemical potential are immersed in an electrolyte causing electrical currents between the metals through the conducting medium. To restore lost or damaged teeth, different alloys are used, leaving the mouth exposed to electrical currents that circulate
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Integrated Experimental Approach for Alloying of Surface Layer Ti6Al4V+B4C Metal Matrix Composites using Laser Treatment
Surface engineering applications have brought the titanium and its alloys into the limelight in the manufacturing industries such as the aerospace, automobile, marine, chemical processing industry, nuclear power and biomedical. Despite the growths experienced in the use of this material, it is plagued with poor wear behaviour, especially when in contact with
Mat. Res.. Publicado em: 17/01/2019
-
12. Influence of Copper and Metallic Alloys on the Oxidation Reaction of Commercial Biodiesel in Mixture with Natural Antioxidant
The purpose of this research was to evaluate the influence of metallic alloys and copper in the degradation of biodiesel in mixture with blackberry extract. Biodiesel is formed by unsaturated esters highly susceptible to the oxidation reaction. The initial induction period (IP) of the control sample was 9.53 h and, after 208 days, the IP reduced to 5.74 h. H
J. Braz. Chem. Soc.. Publicado em: 2019-01