Metallic Composites
Mostrando 1-12 de 49 artigos, teses e dissertações.
-
1. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
2. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
3. Efeito da adição de fibras híbridas na durabilidade de compósitos cimentícios avançados em ambientes úmidos e agressivos
ABSTRACT Reactive powder concrete (RPC) is one type of advanced cementitious composite that has been increasingly used. Its high mechanical strength enables the application of the composite in bolder structures. Considering its recent history of use, there is a lack of knowledge about this materials durability. Therefore, this paper aimed to evaluate the beh
Matéria (Rio J.). Publicado em: 18/10/2018
-
4. Obtención de compuesto de titanio con gradiente de porosidad mediante técnica pulvimetalúrgica
ABSTRACT Within the study of biomaterials for implantological use titanium is among the most widely employed metals due to its excellent corrosion and mechanical resistance. In spite of the advances made, there are some issues remaining with the value of the elastic moduli of the titanium (110GPa) in comparison with the elastic moduli of the cortical bone (2
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Laser Cladding of Fe-based Metallic Glass/MoS2 Self-lubricating Composites: Effect of Power and Scanning Speed
MoS2 powder has been used to form "self-lubricating" composite coatings, which are very useful to increase the lifetime of machines where liquid lubricants cannot be used. In this work, amorphous overspray powder of Fe60Cr8Nb8B24 (at%) alloy was mixed with 5wt.% MoS2 powder and it was used to produce single tracks on AISI 1020 steel substrates by laser cladd
Mat. Res.. Publicado em: 01/02/2018
-
6. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12
-
7. Nondestructive characterization of epoxy matrix composites reinforced with Luffa lignocellulosic fibers
ABSTRACT Luffa Cylindrica is a tropical plant from the Cucurbitaceae family, whose fruit becomes very fibrous when fully ripened. The lignocellulosic sponges of Luffa can be suitable for use as reinforcement of epoxy matrix composites, because they have a morphology with spatial 3-D arrangement as well as are eco-friendly materials (biodegradable, and high a
Matéria (Rio J.). Publicado em: 20/07/2017
-
8. Synthesis, Microstructural Characterization and Microhardness of AlCoNi-SiC Composite Prepared by Mechanical Alloying
Equiatomic AlCoNi alloy matrix were reinforced by the dispersion of SiC nanoparticles (SiCnp) using the mechanical alloying process. The metallic powders were milled for 10, 20 and 30 h and sintered at 1200 0C under vacuum. Through particle size distribution, X-ray diffraction and scanning electron microscopy investigations, the mechanically alloyed powders
Mat. Res.. Publicado em: 05/01/2017
-
9. Effect of Rockwool and Steel fiber on the Friction Performance of Brake Lining Materials
ABSTRACT Wear resistance and Frictional stability are key performance requirements for brake lining. Automotive brake linings are usually made of various ingredients such as binder, filler, friction modifiers and reinforcement. Rockwool is a mineral fiber and steel fiber is a metallic fiber. In this work reinforcement fibers used are both the mineral and met
Matéria (Rio J.). Publicado em: 2016-09
-
10. Enhancement of Mechanical Properties of Aluminum and 2124 Aluminum Alloy by the Addition of Quasicrystalline Phases
A structural and mechanical characterization of pure aluminum and 2124 T6 aluminum alloy reinforced with quasicrystalline phases of composition Al65Cu20Fe15 and Al70.5Pd21Mn8.5 (%at.) were performed. The quasicrystalline phases were synthesized by arc melting and then milled to produce powder of the alloys, which were then mechanical mixed with the starting
Mat. Res.. Publicado em: 25/08/2016
-
11. Mechanical Characterization of Synthetic Macrofibres
The present study proposes a methodology to characterize the mechanical properties of synthetic macrofibres, which are used as a reinforcement of new composites applied in civil construction industry. Some standards suggest that this characterization should be performed on original filaments and others propose using the current methodology used to characteri
Mat. Res.. Publicado em: 26/04/2016
-
12. Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía
The composites known as CERMETS are a combination between ceramics and metallic materials. The properties of these materials are different in comparison to conventional materials and their derivatives. The processing methodology of 3Al2O3*2SiO2 reinforced with silver metallic particles (CERMET) was established and discussed in this research. The final chemic
Matéria (Rio J.). Publicado em: 2016-03