Method Nonlinear Programming
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Optimization of geometrically nonlinear truss structures under dynamic loading
Abstract The goal of this article is to present the formulation of the optimization problem of truss structures with geometric nonlinearity under dynamic loads and provide examples of this problem. The formulated optimization problem aims to determine the cross-sectional area of the bars that minimizes the weight of the structure, imposing constraints on nod
REM, Int. Eng. J.. Publicado em: 2020-09
-
2. Optimization of shells modeled using NURBS subjected to a dynamic loading condition
Abstract This study presents an optimization method for the thickness of shell elements subjected to dynamic loads. Structural analyses were carried out using the finite element method. The analyzed domains were modeled using NURBS, and meshes were generated using a transformation of the parametric domain into the geometric domain via a geometric function. T
REM, Int. Eng. J.. Publicado em: 2020-03
-
3. Optimized dimensioning of steel-concrete composite beams
Resumo As seções mistas de aço e concreto estão cada vez mais sendo utilizadas na construção civil, tanto no cenário mundial quanto no Brasil. O trabalho conjunto do perfil de aço e da laje de concreto aumenta consideravelmente o desempenho do elemento estrutural misto devido ao aproveitamento das vantagens de cada material. Neste trabalho, é utiliz
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
4. The electric boat charging problem
Abstract Paper aims This paper studies a new optimization problem called the Electric Boat Charging Problem (EBCP), which is based on the application of electric mobility in a river transport operation problem. Originality This work pioneers the studies of the electric mobility on the river operations, by proposing the EBCP. This problem includes real feat
Prod.. Publicado em: 23/09/2019
-
5. Optimization of reinforced concrete polygonal sections under biaxial bending with axial force
Abstract Concrete is the world’s most utilized material for production of the structural elements employed in civil construction. Due to its low tensile strength and brittle nature it is reinforced with steel bars forming the reinforced concrete (RC structure). Linear elements of reinforced concrete are commonly employed in multi-story buildings, bridges,
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
6. PERIODIC REVIEW SYSTEM FOR INVENTORY REPLENISHMENT CONTROL FOR A TWO-ECHELON LOGISTICS NETWORK UNDER DEMAND UNCERTAINTY: A TWO-STAGE STOCHASTIC PROGRAMING APPROACH
ABSTRACT Here, we propose a novel methodology for replenishment and control systems for inventories of two-echelon logistics networks using a two-stage stochastic programming, considering periodic review and uncertain demands. In addition, to achieve better customer services, we introduce a variable rationing rule to address quantities of the item in short.
Pesqui. Oper.. Publicado em: 2017-08
-
7. Static Limit Analysis of Reinforced Soil Structures by a Simple Finite Element and Second-Order Cone Programming
Abstract To discretize reinforced soil structures in plane strain and predict their collapse load, a simple three-node triangular finite element is formulated based on the static theorem of the limit analysis. The element satisfies the equilibrium equations and the mechanical boundary conditions in a weak sense. A modified Mohr-Coulomb yield surface is adopt
Lat. Am. j. solids struct.. Publicado em: 2017
-
8. Análise termodinâmica de processos de reforma do metano e da síntese Fischer-Tropsch / Thermodynamic analysis of methane reforming processes and Fischer-Tropsch synthesis
The reactions of reforming of light hydrocarbons, especially natural gas, are chemical reactions of great importance and represent key steps for large scale production of hydrogen for use in hydrogenation reactions or fuel cells, or synthesis gas production, for application in the ammonia or methanol production, or to Fischer-Tropsch (FT) synthesis. The Fisc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2012
-
9. Metaheurística para o Problema de Planejamento de Redes de Transmissão de Energia Elétrica com Redimensionamento / Metaheuristics for the transmission expansion planning problem with redesign
At times, the electrical load in dierent areas varies, claiming the construction of new electric generators and the expansion of the electrical transmission network. In this dissertation we focus on the transmission expansion planning problem, assuming that new generators are built to meet the new demands. This expansion requires large investments, which nee
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2012
-
10. Um método de Lagrangianos aumentados e sua aplicação em otimização de malhas / An augmented Lagrangian method and its application in optimization
Métodos de Lagrangianos aumentados são muito utilizados para resolver problemas de minimização de funções sujeitas a restrições gerais. Em particular, estudamos um método de Lagrangianos aumentados que utiliza a função PHR, implementado em ALGENCAN, e observamos seu comportamento quando o aplicamos na resolução de um problema encontrado na área
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/02/2012
-
11. Determination of the reinforced concrete slabs ultimate load using finite element method and mathematical programming
In the present paper, the ultimate load of the reinforced concrete slabs [16] is determined using the finite element method and mathematical programming. The acting efforts and displacements in the slab are obtained by a perfect elasto-plastic analysis developed by finite element method. In the perfect elasto-plastic analysis the Newton-Raphson method [20] i
Latin American Journal of Solids and Structures. Publicado em: 2012
-
12. Aplicação do método da minimização da energia de Gibbs no cálculo de equilíbrio químico e de fases em sistemas eletrolíticos / Application method of the Gibbs energy minimization to calculation of phase and chemical equilibrium in electrolyte systems
In several industrial applications are used mixtures containing different solutes, often these solutes are non-volatile, such as electrolytes. The phase and chemical equilibrium in these processes occur in the various unit operations. The stages of production, as well as the separation and purification steps are critical to product quality. Thus, the calcula
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/12/2011