Microchannel
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Paper-Based Microfluidics Immunoassay for Detection of Canine Distemper Virus
ABSTRACT Paper-based devices present low-cost and are versatile, making them very attractive for clinical analysis. To manufacture those devices wax patterns are printed on paper surface and upon heating the wax permeates through the entire thickness of the paper, creating hydrophobic barriers that delimit test areas. Antibodies produced in rabbits against c
Braz. arch. biol. technol.. Publicado em: 08/01/2018
-
2. PROTOTIPAGEM DE MICRORREATORES FOTOCATALÍTICOS E TESTES DE FOTODEGRADAÇÃO DE CORANTES ORGÂNICOS
A photocatalytic microreactor is defined as a microfluidic device, which is integrated with a photocatalytic coating of TiO2 deposited on the inner surface of microchannels. This device is capable of degradation of organic dye solution in water in a continuous flow under the action of ultraviolet light. The objectives of this work were to prese
Quím. Nova. Publicado em: 2015-07
-
3. Desenvolvimento de processo microfluídico para incorporação de DNA em lipossomas catiônicos destinados a terapia e vacinação gênica = : Development of microfluidic process for DNA incorporation into cationic liposomes for gene therapy and vaccination / Development of microfluidic process for DNA incorporation into cationic liposomes for gene therapy and vaccination
This research aimed at the technological development of microfluidic process for nonviral carriers production based on the electrostatic complexation between cationic liposomes (CL) and plasmidal DNA (pDNA) for gene and vaccine therapy applications. The development of this process was compared to the conventional bulk process, in which the solutions are mixe
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/07/2012
-
4. Estudo teórico-experimental da transferência de calor e do fluxo crítico durante a ebulição convectiva no interior de microcanais / A theoretical and experimental study on flow boiling heat transfer and critical heat flux in microchannels
A pesquisa realizada tratou do estudo da transferência de calor e do fluxo crítico durante a ebulição convectiva no interior de canais de diâmetro reduzidos a partir de dados levantados em bancadas experimentais construídas para esta finalidade. Extensa pesquisa bibliográfica foi efetuada e os principais métodos disponíveis para previsão de coefici
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/07/2011
-
5. Projeto de dispositivos de microcanais utilizando o método de otimização topológica. / Design of microchannel devices applying the topology optimization method.
Este trabalho propõe o estudo do projeto de dispositivos baseados em microcanais de fluido, tais como difusores, misturadores, válvulas, e trocadores de calor, através da aplicação do Método de Otimização Topológica (MOT). O MOT é um método computacional que permite obter um projeto otimizado de um sistema, através da distribuição de uma quanti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/10/2010
-
6. Heat transfer in porous media
In this work, the effects of electrical double layer (EDL) near the solid/ liquid interface, on three dimensional heat transfer characteristic and pressure drop of water flow through a rectangular microchannel numerically are investigated. An additional body force originating from the existence of EDL is considered to modify the conventional Navier-stokes an
Brazilian Journal of Chemical Engineering. Publicado em: 2007-06
-
7. Carbon dioxide evaporation in a single microchannel
Despite its importance for designing evaporators and condensers, a review of the literature shows that heat transfer data during phase change of carbon dioxide is very limited, mainly for microchannel flows. In order to give a contribution on this subject, an experimental study of CO2 evaporation inside a 0.8 mm-hydraulic diameter microchannel was performed
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-03
-
8. CHARACTERIZATION OF THE ELECTRON INDUCED UV EMISSION IN THIN FILM MATERIALS / CARACTERIZAÇÃO DA EMISSÃO DE RADIAÇÃO NA FAIXA DE UV INDUZIDA POR ELÉTRONS EM MATERIAIS EM FORMA DE FILMES FINOS
O objetivo deste projeto foi a montagem de um sistema que permitisse a caracterização de novos materiais em forma de filmes finos para aplicações em sistemas com detectores de UV, concentrando a nossa pesquisa na caracterização da radiação emitida por alguns filmes finos irradiados com um feixe de elétrons. A utilização de uma Micro-Channel Plate
Publicado em: 2005
-
9. In Situ observation of phase transformations in the Fe-Zn system
In this study, the MAXIM technique was used in an attempt to clarify the phase transformation sequence that occurs during in situ annealing of galvanized samples. A diffractometer equipped with a novel imaging system comprising a Micro-Channel Plate in front of a CCD camera was used. The galvanized samples were produced under typical industrial conditions, w
Materials Research. Publicado em: 2003-12
-
10. Effects of condensation in microchannels with a porous boundary: analytical investigation on heat transfer and meniscus shape
In two-phase miniature and microchannel flows, the meniscus shape must be considered due to effects that are affected by condensation and/or evaporation and coupled with the transport phenomena in the thin film on the microchannel wall, when capillary forces drive the working fluid. This investigation presents an analytical model for microchannel condensers
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2002-07
-
11. ANALYSIS OF REACTIONS IN THE FE-ZN SYSTEM THROUGH X-RAYS DIFFRACTION IMAGING IMAGE PROCESSING / ANÁLISE DAS REAÇÕES DO SISTEMA FE-ZN ATRAVÉS DE DIFRAÇÃO DE RAIOS-X SENSÍVEL À POSIÇÃO E PROCESSAMENTO DE IMAGENS
O processo de galvanização por imersão a quente é uma técnica industrial largamente utilizada para proteger componentes de aço expostos à corrosão ambiental. Este processo envolve reações complexas, cujos mecanismos ainda são motivo de debate. A boa performance do revestimento está diretamente relacionada com as fases intermetálicas presentes no
Publicado em: 2002
-
12. SDS capillary gel electrophoresis of proteins in microfabricated channels
Analysis of variations in the concentrations or structures of biomolecules (e.g., mRNAs, proteins, peptides, natural products) that occur either naturally or in response to environmental or genetic perturbations can provide important insight into complex biological processes. Many biological samples are mixtures that require a separation step before quantita
The National Academy of Sciences.